1# RV1106 Release Note 2 3## rv1106_hpmcu_tb_{sc230ai,sc3338,sc4336,dual_sc3338}_v1.66.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 7| 2023-06-07 | rv1106_hpmcu_tb_{sc230ai,sc3338,sc4336,dual_sc3338}_v1.66.bin | rtt:07ac6e9#hal:d93ef9fd#battery_ipc:04a4e08 | important | 8 9### Fixed 10 11| Index | Severity | Update | Issue description | Issue source | 12| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 13| 1 | important | AIQ update to v5.0x1.2-rc5 | Resolve RTT boot-up coredump | - | 14 15------ 16 17## rv1106_tee_ta_v1.00.bin 18 19| Date | File | Build commit | Severity | 20| ---------- | :---------------------- | ------------ | --------- | 21| 2023-06-02 | rv1106_tee_ta_v1.00.bin | eda5ab67 | important | 22 23### New 24 251. The RV1106 platform supports OPTEE. 26 27------ 28 29## rv1106_ddr_924MHz{_tb}_v1.12.bin 30 31| Date | File | Build commit | Severity | 32| ---------- | :------------------------------- | ------------ | -------- | 33| 2023-05-31 | rv1106_ddr_924MHz{_tb}_v1.12.bin | 6cf9a2f250 | critical | 34 35### Fixed 36 37| Index | Severity | Update | Issue description | Issue source | 38| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 39| 1 | critical | Change DDR3 power down mode to fast exit | DDR3 power down in slow exit mode may be unstable in certain scenarios | - | 40| 2 | important | Change default DDR refresh rate to 4x | Enhance the stability of DDR in high temperature environment | - | 41 42------ 43 44## rv1106_hpmcu_wrap_v1.56.bin 45 46| Date | File | Build commit | Severity | 47| ---------- | :-------------------------- | ------------------------------- | -------- | 48| 2023-05-11 | rv1106_hpmcu_wrap_v1.56.bin | rockit_ko:d1a2dabb#hal:a76806e7 | important | 49 50### New 51 521. Use new wrap struct. 53 54------ 55 56## rv1106_hpmcu_tb_{sc230ai,sc3338,sc4336,dual_sc3338}_v1.65.bin 57 58| Date | File | Build commit | Severity | 59| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 60| 2023-05-06 | rv1106_hpmcu_tb_{sc230ai,sc3338,sc4336,dual_sc3338}_v1.65.bin | rtt:d2d09ba#hal:d93ef9fd#battery_ipc:0534d87 | important | 61 62### Fixed 63 64| Index | Severity | Update | Issue description | Issue source | 65| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 66| 1 | important | AIQ update to v5.0x1.2-rc4 | Resolve RTT boot-up coredump | - | 67 68------ 69 70## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.64.bin 71 72| Date | File | Build commit | Severity | 73| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 74| 2023-04-04 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.64.bin | rtt:c6b03745b#hal:d93ef9fd#battery_ipc:12da3e7 | critical | 75 76### Fixed 77 78| Index | Severity | Update | Issue description | Issue source | 79| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 80| 1 | critical | Fix the camera_num not init. | If camera_num not init, it causes the drop cache to take much time | - | 81| 2 | important | Sync meta's head file. | Modify the partition of meta | - | 82| 3 | important | Fix the secondary camera mirror and flip parameter config error | the secondary camera mirror and flip parameter use the wrong config | - | 83 84------ 85 86## rv1106_hpmcu_tb_gc2093_v1.64.bin 87 88| Date | File | Build commit | Severity | 89| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 90| 2023-03-31 | rv1106_hpmcu_tb_gc2093_v1.64.bin | rtt:bd3010959#hal:e2f3eac3#battery_ipc:61d3fb5 | important | 91 92### New 93 941. Sync with AIQ V5.0x1.2-rc2. 95 96------ 97 98## rv1106_usbplug_v1.07.bin 99 100| Date | File | Build commit | Severity | 101| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 102| 2023-03-16 | rv1106_usbplug_v1.07.bin | I6b73e5e | important | 103 104### New 105 1061. Support new spi flash. 107 108------ 109 110## rv1106_ddr_924MHz{_tb}_v1.11.bin 111 112| Date | File | Build commit | Severity | 113| ---------- | :------------------------------- | ------------ | --------- | 114| 2023-03-28 | rv1106_ddr_924MHz{_tb}_v1.11.bin | 285bced5c1 | important | 115 116### Fixed 117 118| Index | Severity | Update | Issue description | Issue source | 119| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 120| 1 | important | Change DDR3 CLK drv of QFN | DDR may be unstable in certain scenarios | - | 121 122------ 123 124## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin 125 126| Date | File | Build commit | Severity | 127| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 128| 2023-03-24 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin | rtt:c6b03745b#hal:d93ef9fd#battery_ipc:f52bf08 | critical | 129 130### New 131 1321. Add dual sc3338 camera driver support. 1332. Support to get DPHY, VICAP, CSI2HOST device info from board config. 1343. Support dual camera fastboot. 135 136------ 137 138## rv1106_hpmcu_tb_gc2093_v1.63.bin 139 140| Date | File | Build commit | Severity | 141| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 142| 2023-03-07 | rv1106_hpmcu_tb_gc2093_v1.63.bin | rtt:831ea1368#hal:d93ef9fd#battery_ipc:12d4661 | important | 143 144### New 145 1461. Gc2093 add 1920x1080@25fps 27M mclk. 147 148------ 149 150## rv1106_hpmcu_tb_gc2093_v1.62.bin 151 152| Date | File | Build commit | Severity | 153| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 154| 2023-02-16 | rv1106_hpmcu_tb_gc2093_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 155 156### New 157 1581. Fast ae supports up to 20 frames as default. 1592. Add IR/white light mode support. 1603. Add support for nonlinear single range ADC. 1614. Add support for soft light sensor. 1625. Supports the configuration of fast ae run frame number. 163 164### Fixed 165 166| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 167| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 168| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 169 170------ 171 172## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin 173 174| Date | File | Build commit | Severity | 175| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 176| 2023-02-01 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 177 178### Fixed 179 180| Index | Severity | Update | Issue source | Issue | 181| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ----- | 182| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 183 184------ 185 186## rv1106_hpmcu_wrap_v1.54.bin 187 188| Date | File | Build commit | Severity | 189| ---------- | :-------------------------- | ------------------------------- | -------- | 190| 2023-1-15 | rv1106_hpmcu_wrap_v1.54.bin | rockit_ko:69d42563#hal:a76806e7 | important | 191 192### Fixed 193 194| Index | Severity | Update | Issue source | Issue | 195| ----- | --------- | --------------------------- | --------------------------------- | -------- | 196| 1 | important | Increase the monitoring conditions of wrap OVERFLOW | image tear possiable | - | 197 198------ 199 200## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin 201 202| Date | File | Build commit | Severity | 203| ---------- | :------------------------------------------------------- | ---------------------------------------------- | -------- | 204| 2023-01-05 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:dacbbc1 | critical | 205 206### Fixed 207 208| Index | Severity | Update | Issue description | Issue source | 209| ----- | -------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 210| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 211| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 212 213------ 214 215## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin 216| Date | File | build commit | Severity | 217| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 218| 2022-12-22 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin | rtt:755701b24#hal:d93ef9fd#battery_ipc:18df679ea | critical | 219 220### New 221 2221. Add sc4336 support. 2232. Fast ae supports up to 20 frames as default. 2243. Add IR/white light mode support. 2254. Add support for nonlinear single range ADC. 2265. Add support for soft light sensor. 2276. Supports the configuration of fast ae run frame number. 228 229### Fixed 230 231| Index | Severity | Update | Issue description | Issue source | 232| ----- | -------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 233| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 234 235------ 236 237## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin 238 239| Date | File | Build commit | Severity | 240| ---------- | :------------------------------------------------ | ------------------------------------------- | -------- | 241| 2022-11-17 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin | rtt:a40f17d#hal:b569247#battery_ipc:c62dd55 | critical | 242 243### New 244 2451. Sc3338 add 1152x648@60fps 27M mclk bining config，chose this config as default. 2462. Add gc3003 sensor support. 247 248### Fixed 249 250| Index | Severity | Update | Issue description | Issue source | 251| ----- | -------- | ------------------------------ | ------------------------------------------------------------ | ------------ | 252| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 253 254------ 255 256## rv1106_hpmcu_wrap_v1.53.bin 257 258| Date | File | Build commit | Severity | 259| ---------- | :-------------------------- | ------------------------------- | -------- | 260| 2022-11-16 | rv1106_hpmcu_wrap_v1.53.bin | rockit_ko:c9653fe9#hal:a76806e7 | important | 261 262### Fixed 263 264| Index | Severity | Update | Issue source | Issue | 265| ----- | --------- | --------------------------- | --------------------------------- | -------- | 266| 1 | important | adjust QOS policy | ISP probabilistic mipi drop frame | - | 267| 2 | important | stop the mcu when rebooting | probabilistic stuck during reboot | - | 268 269------ 270 271## rv1106_ddr_924MHz{_tb}_v1.10.bin 272 273| Date | File | Build commit | Severity | 274| ---------- | :------------------------------- | ------------ | --------- | 275| 2022-11-15 | rv1106_ddr_924MHz{_tb}_v1.10.bin | ec2fae0c96 | important | 276 277### Fixed 278 279| Index | Severity | Update | Issue description | Issue source | 280| ----- | --------- | --------------------------------------------------- | --------------------------------------------------- | ------------ | 281| 1 | important | Change reg_fb1xclk_invdelaysel_dqcmd（except DDR2） | DDR may be unstable under specific freq and voltage | - | 282| 2 | moderate | Improve write trian pattern | Improve the accuracy of write train | - | 283 284------ 285 286## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin 287 288| Date | File | Build commit | Severity | 289| --------- | :----------------------------------------- | ---------------------------------------------- | --------- | 290| 2022-11-1 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin | rtt:05d3e965d#hal:b569247c#battery_ipc:bc3785d | important | 291 292### Fixed 293 294| Index | Severity | Update | Issue description | Issue source | 295| ----- | --------- | ------------------------------------------------------- | ------------------------------------------------ | ------------ | 296| 1 | important | Fixed sc3338 horizontal stripes when in dark brightness | sc3338 has horizontal stripes in dark brightness | - | 297 298------ 299 300## rv1106_hpmcu_tb_gc2093_v1.30.bin 301 302| Date | File | Build commit | Severity | 303| ---------- | :------------------------------- | ------------------------------------------------------------ | -------- | 304| 2022-10-27 | rv1106_hpmcu_tb_gc2093_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c#rtt-cherry-pick:8b1555259 | important | 305 306### New 307 3081. Add gc2093 sensor support. 309 310------ 311 312## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin 313 314| Date | File | Build Commit | Severity | 315| ---------- | :----------------------------------------- | ------------------------------------------------ | -------- | 316| 2022-10-20 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c | important | 317 318### New 319 3201. Add support for LTR308 digital light sensor. 3212. Add support for hdr. 322 323### Fixed 324 325| Index | Severity | Update | Issue description | Issue source | 326| ----- | --------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 327| 1 | important | Fixed 0 address flushed | When the spi nor flash is in 1-wire mode, spl data is flushed, so spl cannot be started. | - | 328| 2 | important | Fix the shared memory cache operation | The ARM core cannot obtain the shared memory data in time. | - | 329 330------ 331 332## rv1106_hpmcu_wrap_v1.50.bin 333 334| Date | File | Build commit | Severity | 335| ---------- | :-------------------------- | ------------------------------- | -------- | 336| 2022-09-29 | rv1106_hpmcu_wrap_v1.50.bin | rockit_ko:576377cb#hal:a76806e7 | critical | 337 338### Fixed 339 340| Index | Severity | Update | Issue description | Issue source | 341| ----- | --------- | -------------------------- | ------------------------------------------ | ------------ | 342| 1 | moderate | optimize code | decrease code size and add log information | - | 343| 2 | important | increase encoder ddr qos | slove some wrap overflow | - | 344| 3 | critical | invalite icache and dcache | destory linux memory for cache exchange | - | 345 346------ 347 348## rv1106_hpmcu_wrap_v1.46.bin 349 350| Date | File | Build commit | Severity | 351| ---------- | :-------------------------- | ------------------------------- | --------- | 352| 2022-09-08 | rv1106_hpmcu_wrap_v1.46.bin | rockit_ko:7e8fe8af#hal:a76806e7 | important | 353 354### Fixed 355 356| Index | Severity | Update | Issue description | Issue source | 357| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | 358| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | - | 359| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | - | 360| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | - | 361 362------ 363 364## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin 365 366| Date | File | Build Commit | Severity | 367| ---------- | :-------------------------------- | ---------- | --------- | 368| 2022-09-03 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin | rtt:efa791c#hal:b569247#battery_ipc:d5fb92e | critical | 369 370### New 371 3721. Support full parameters in aiq for the first frame in fastboot. 3732. Support set resolution and fps from meta partition. 3743. Support sync meta header file. 3754. Optimize the iq result for fast AE,The exposure decomposition is exactly consistent with aiq, supports DB gain synsensor, and supports the check exposure register. 3765. Enable AE statistics in full-parameter parallel solution. 3776. Meta addresses can be configured using menuconfig. 378 379### Fixed 380 381| Index | Severity | Update | Issue description | Issue source | 382| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 383| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | - | 384| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | - | 385| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | - | 386| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | - | 387