1# RV1106 Release Note 2 3## rv1106_tee_ta_v1.00.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :---------------------- | ------------ | --------- | 7| 2023-06-02 | rv1106_tee_ta_v1.00.bin | eda5ab67 | important | 8 9### New 10 111. The RV1106 platform supports OPTEE. 12 13------ 14 15## rv1106_ddr_924MHz{_tb}_v1.12.bin 16 17| Date | File | Build commit | Severity | 18| ---------- | :------------------------------- | ------------ | -------- | 19| 2023-05-31 | rv1106_ddr_924MHz{_tb}_v1.12.bin | 6cf9a2f250 | critical | 20 21### Fixed 22 23| Index | Severity | Update | Issue description | Issue source | 24| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 25| 1 | critical | Change DDR3 power down mode to fast exit | DDR3 power down in slow exit mode may be unstable in certain scenarios | - | 26| 2 | important | Change default DDR refresh rate to 4x | Enhance the stability of DDR in high temperature environment | - | 27 28------ 29 30## rv1106_hpmcu_wrap_v1.56.bin 31 32| Date | File | Build commit | Severity | 33| ---------- | :-------------------------- | ------------------------------- | -------- | 34| 2023-05-11 | rv1106_hpmcu_wrap_v1.56.bin | rockit_ko:d1a2dabb#hal:a76806e7 | important | 35 36### New 37 381. Use new wrap struct. 39 40------ 41 42## rv1106_hpmcu_tb_{sc230ai,sc3338,sc4336,dual_sc3338}_v1.65.bin 43 44| Date | File | Build commit | Severity | 45| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 46| 2023-05-06 | rv1106_hpmcu_tb_{sc230ai,sc3338,sc4336,dual_sc3338}_v1.65.bin | rtt:d2d09ba#hal:d93ef9fd#battery_ipc:0534d87 | important | 47 48### Fixed 49 50| Index | Severity | Update | Issue description | Issue source | 51| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 52| 1 | important | AIQ update to v5.0x1.2-rc4 | Resolve RTT boot-up coredump | - | 53 54------ 55 56## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.64.bin 57 58| Date | File | Build commit | Severity | 59| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 60| 2023-04-04 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.64.bin | rtt:c6b03745b#hal:d93ef9fd#battery_ipc:12da3e7 | critical | 61 62### Fixed 63 64| Index | Severity | Update | Issue description | Issue source | 65| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 66| 1 | critical | Fix the camera_num not init. | If camera_num not init, it causes the drop cache to take much time | - | 67| 2 | important | Sync meta's head file. | Modify the partition of meta | - | 68| 3 | important | Fix the secondary camera mirror and flip parameter config error | the secondary camera mirror and flip parameter use the wrong config | - | 69 70------ 71 72## rv1106_hpmcu_tb_gc2093_v1.64.bin 73 74| Date | File | Build commit | Severity | 75| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 76| 2023-03-31 | rv1106_hpmcu_tb_gc2093_v1.64.bin | rtt:bd3010959#hal:e2f3eac3#battery_ipc:61d3fb5 | important | 77 78### New 79 801. Sync with AIQ V5.0x1.2-rc2. 81 82------ 83 84## rv1106_usbplug_v1.07.bin 85 86| Date | File | Build commit | Severity | 87| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 88| 2023-03-16 | rv1106_usbplug_v1.07.bin | I6b73e5e | important | 89 90### New 91 921. Support new spi flash. 93 94------ 95 96## rv1106_ddr_924MHz{_tb}_v1.11.bin 97 98| Date | File | Build commit | Severity | 99| ---------- | :------------------------------- | ------------ | --------- | 100| 2023-03-28 | rv1106_ddr_924MHz{_tb}_v1.11.bin | 285bced5c1 | important | 101 102### Fixed 103 104| Index | Severity | Update | Issue description | Issue source | 105| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 106| 1 | important | Change DDR3 CLK drv of QFN | DDR may be unstable in certain scenarios | - | 107 108------ 109 110## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin 111 112| Date | File | Build commit | Severity | 113| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 114| 2023-03-24 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin | rtt:c6b03745b#hal:d93ef9fd#battery_ipc:f52bf08 | critical | 115 116### New 117 1181. Add dual sc3338 camera driver support. 1192. Support to get DPHY, VICAP, CSI2HOST device info from board config. 1203. Support dual camera fastboot. 121 122------ 123 124## rv1106_hpmcu_tb_gc2093_v1.63.bin 125 126| Date | File | Build commit | Severity | 127| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 128| 2023-03-07 | rv1106_hpmcu_tb_gc2093_v1.63.bin | rtt:831ea1368#hal:d93ef9fd#battery_ipc:12d4661 | important | 129 130### New 131 1321. Gc2093 add 1920x1080@25fps 27M mclk. 133 134------ 135 136## rv1106_hpmcu_tb_gc2093_v1.62.bin 137 138| Date | File | Build commit | Severity | 139| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 140| 2023-02-16 | rv1106_hpmcu_tb_gc2093_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 141 142### New 143 1441. Fast ae supports up to 20 frames as default. 1452. Add IR/white light mode support. 1463. Add support for nonlinear single range ADC. 1474. Add support for soft light sensor. 1485. Supports the configuration of fast ae run frame number. 149 150### Fixed 151 152| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 153| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 154| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 155 156------ 157 158## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin 159 160| Date | File | Build commit | Severity | 161| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 162| 2023-02-01 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 163 164### Fixed 165 166| Index | Severity | Update | Issue source | Issue | 167| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ----- | 168| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 169 170------ 171 172## rv1106_hpmcu_wrap_v1.54.bin 173 174| Date | File | Build commit | Severity | 175| ---------- | :-------------------------- | ------------------------------- | -------- | 176| 2023-1-15 | rv1106_hpmcu_wrap_v1.54.bin | rockit_ko:69d42563#hal:a76806e7 | important | 177 178### Fixed 179 180| Index | Severity | Update | Issue source | Issue | 181| ----- | --------- | --------------------------- | --------------------------------- | -------- | 182| 1 | important | Increase the monitoring conditions of wrap OVERFLOW | image tear possiable | - | 183 184------ 185 186## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin 187 188| Date | File | Build commit | Severity | 189| ---------- | :------------------------------------------------------- | ---------------------------------------------- | -------- | 190| 2023-01-05 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:dacbbc1 | critical | 191 192### Fixed 193 194| Index | Severity | Update | Issue description | Issue source | 195| ----- | -------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 196| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 197| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 198 199------ 200 201## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin 202| Date | File | build commit | Severity | 203| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 204| 2022-12-22 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin | rtt:755701b24#hal:d93ef9fd#battery_ipc:18df679ea | critical | 205 206### New 207 2081. Add sc4336 support. 2092. Fast ae supports up to 20 frames as default. 2103. Add IR/white light mode support. 2114. Add support for nonlinear single range ADC. 2125. Add support for soft light sensor. 2136. Supports the configuration of fast ae run frame number. 214 215### Fixed 216 217| Index | Severity | Update | Issue description | Issue source | 218| ----- | -------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 219| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 220 221------ 222 223## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin 224 225| Date | File | Build commit | Severity | 226| ---------- | :------------------------------------------------ | ------------------------------------------- | -------- | 227| 2022-11-17 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin | rtt:a40f17d#hal:b569247#battery_ipc:c62dd55 | critical | 228 229### New 230 2311. Sc3338 add 1152x648@60fps 27M mclk bining config，chose this config as default. 2322. Add gc3003 sensor support. 233 234### Fixed 235 236| Index | Severity | Update | Issue description | Issue source | 237| ----- | -------- | ------------------------------ | ------------------------------------------------------------ | ------------ | 238| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 239 240------ 241 242## rv1106_hpmcu_wrap_v1.53.bin 243 244| Date | File | Build commit | Severity | 245| ---------- | :-------------------------- | ------------------------------- | -------- | 246| 2022-11-16 | rv1106_hpmcu_wrap_v1.53.bin | rockit_ko:c9653fe9#hal:a76806e7 | important | 247 248### Fixed 249 250| Index | Severity | Update | Issue source | Issue | 251| ----- | --------- | --------------------------- | --------------------------------- | -------- | 252| 1 | important | adjust QOS policy | ISP probabilistic mipi drop frame | - | 253| 2 | important | stop the mcu when rebooting | probabilistic stuck during reboot | - | 254 255------ 256 257## rv1106_ddr_924MHz{_tb}_v1.10.bin 258 259| Date | File | Build commit | Severity | 260| ---------- | :------------------------------- | ------------ | --------- | 261| 2022-11-15 | rv1106_ddr_924MHz{_tb}_v1.10.bin | ec2fae0c96 | important | 262 263### Fixed 264 265| Index | Severity | Update | Issue description | Issue source | 266| ----- | --------- | --------------------------------------------------- | --------------------------------------------------- | ------------ | 267| 1 | important | Change reg_fb1xclk_invdelaysel_dqcmd（except DDR2） | DDR may be unstable under specific freq and voltage | - | 268| 2 | moderate | Improve write trian pattern | Improve the accuracy of write train | - | 269 270------ 271 272## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin 273 274| Date | File | Build commit | Severity | 275| --------- | :----------------------------------------- | ---------------------------------------------- | --------- | 276| 2022-11-1 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin | rtt:05d3e965d#hal:b569247c#battery_ipc:bc3785d | important | 277 278### Fixed 279 280| Index | Severity | Update | Issue description | Issue source | 281| ----- | --------- | ------------------------------------------------------- | ------------------------------------------------ | ------------ | 282| 1 | important | Fixed sc3338 horizontal stripes when in dark brightness | sc3338 has horizontal stripes in dark brightness | - | 283 284------ 285 286## rv1106_hpmcu_tb_gc2093_v1.30.bin 287 288| Date | File | Build commit | Severity | 289| ---------- | :------------------------------- | ------------------------------------------------------------ | -------- | 290| 2022-10-27 | rv1106_hpmcu_tb_gc2093_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c#rtt-cherry-pick:8b1555259 | important | 291 292### New 293 2941. Add gc2093 sensor support. 295 296------ 297 298## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin 299 300| Date | File | Build Commit | Severity | 301| ---------- | :----------------------------------------- | ------------------------------------------------ | -------- | 302| 2022-10-20 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c | important | 303 304### New 305 3061. Add support for LTR308 digital light sensor. 3072. Add support for hdr. 308 309### Fixed 310 311| Index | Severity | Update | Issue description | Issue source | 312| ----- | --------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 313| 1 | important | Fixed 0 address flushed | When the spi nor flash is in 1-wire mode, spl data is flushed, so spl cannot be started. | - | 314| 2 | important | Fix the shared memory cache operation | The ARM core cannot obtain the shared memory data in time. | - | 315 316------ 317 318## rv1106_hpmcu_wrap_v1.50.bin 319 320| Date | File | Build commit | Severity | 321| ---------- | :-------------------------- | ------------------------------- | -------- | 322| 2022-09-29 | rv1106_hpmcu_wrap_v1.50.bin | rockit_ko:576377cb#hal:a76806e7 | critical | 323 324### Fixed 325 326| Index | Severity | Update | Issue description | Issue source | 327| ----- | --------- | -------------------------- | ------------------------------------------ | ------------ | 328| 1 | moderate | optimize code | decrease code size and add log information | - | 329| 2 | important | increase encoder ddr qos | slove some wrap overflow | - | 330| 3 | critical | invalite icache and dcache | destory linux memory for cache exchange | - | 331 332------ 333 334## rv1106_hpmcu_wrap_v1.46.bin 335 336| Date | File | Build commit | Severity | 337| ---------- | :-------------------------- | ------------------------------- | --------- | 338| 2022-09-08 | rv1106_hpmcu_wrap_v1.46.bin | rockit_ko:7e8fe8af#hal:a76806e7 | important | 339 340### Fixed 341 342| Index | Severity | Update | Issue description | Issue source | 343| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | 344| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | - | 345| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | - | 346| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | - | 347 348------ 349 350## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin 351 352| Date | File | Build Commit | Severity | 353| ---------- | :-------------------------------- | ---------- | --------- | 354| 2022-09-03 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin | rtt:efa791c#hal:b569247#battery_ipc:d5fb92e | critical | 355 356### New 357 3581. Support full parameters in aiq for the first frame in fastboot. 3592. Support set resolution and fps from meta partition. 3603. Support sync meta header file. 3614. Optimize the iq result for fast AE,The exposure decomposition is exactly consistent with aiq, supports DB gain synsensor, and supports the check exposure register. 3625. Enable AE statistics in full-parameter parallel solution. 3636. Meta addresses can be configured using menuconfig. 364 365### Fixed 366 367| Index | Severity | Update | Issue description | Issue source | 368| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 369| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | - | 370| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | - | 371| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | - | 372| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | - | 373