1# RV1106 Release Note 2 3## rv1106_usbplug_v1.07.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 7| 2023-03-16 | rv1106_usbplug_v1.07.bin | I6b73e5e | important | 8 9### New 10 111. Support new spi flash. 12 13------ 14 15## rv1106_ddr_924MHz{_tb}_v1.11.bin 16 17| Date | File | Build commit | Severity | 18| ---------- | :------------------------------- | ------------ | --------- | 19| 2023-03-28 | rv1106_ddr_924MHz{_tb}_v1.11.bin | 285bced5c1 | important | 20 21### Fixed 22 23| Index | Severity | Update | Issue description | Issue source | 24| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 25| 1 | important | Change DDR3 CLK drv of QFN | DDR may be unstable in certain scenarios | - | 26 27------ 28 29## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin 30 31| Date | File | Build commit | Severity | 32| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 33| 2023-03-24 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin | rtt:c6b03745b#hal:d93ef9fd#battery_ipc:f52bf08 | critical | 34 35### New 36 371. Add dual sc3338 camera driver support. 382. Support to get DPHY, VICAP, CSI2HOST device info from board config. 393. Support dual camera fastboot. 40 41------ 42 43## rv1106_hpmcu_tb_gc2093_v1.63.bin 44 45| Date | File | Build commit | Severity | 46| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 47| 2023-03-07 | rv1106_hpmcu_tb_gc2093_v1.63.bin | rtt:831ea1368#hal:d93ef9fd#battery_ipc:12d4661 | important | 48 49### New 50 511. Gc2093 add 1920x1080@25fps 27M mclk. 52 53------ 54 55## rv1106_hpmcu_tb_gc2093_v1.62.bin 56 57| Date | File | Build commit | Severity | 58| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 59| 2023-02-16 | rv1106_hpmcu_tb_gc2093_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 60 61### New 62 631. Fast ae supports up to 20 frames as default. 642. Add IR/white light mode support. 653. Add support for nonlinear single range ADC. 664. Add support for soft light sensor. 675. Supports the configuration of fast ae run frame number. 68 69### Fixed 70 71| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 72| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 73| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 74 75------ 76 77## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin 78 79| Date | File | Build commit | Severity | 80| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 81| 2023-02-01 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 82 83### Fixed 84 85| Index | Severity | Update | Issue source | Issue | 86| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ----- | 87| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 88 89------ 90 91## rv1106_hpmcu_wrap_v1.54.bin 92 93| Date | File | Build commit | Severity | 94| ---------- | :-------------------------- | ------------------------------- | -------- | 95| 2023-1-15 | rv1106_hpmcu_wrap_v1.54.bin | rockit_ko:69d42563#hal:a76806e7 | important | 96 97### Fixed 98 99| Index | Severity | Update | Issue source | Issue | 100| ----- | --------- | --------------------------- | --------------------------------- | -------- | 101| 1 | important | Increase the monitoring conditions of wrap OVERFLOW | image tear possiable | - | 102 103------ 104 105## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin 106 107| Date | File | Build commit | Severity | 108| ---------- | :------------------------------------------------------- | ---------------------------------------------- | -------- | 109| 2023-01-05 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:dacbbc1 | critical | 110 111### Fixed 112 113| Index | Severity | Update | Issue description | Issue source | 114| ----- | -------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 115| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 116| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 117 118------ 119 120## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin 121| Date | File | build commit | Severity | 122| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 123| 2022-12-22 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin | rtt:755701b24#hal:d93ef9fd#battery_ipc:18df679ea | critical | 124 125### New 126 1271. Add sc4336 support. 1282. Fast ae supports up to 20 frames as default. 1293. Add IR/white light mode support. 1304. Add support for nonlinear single range ADC. 1315. Add support for soft light sensor. 1326. Supports the configuration of fast ae run frame number. 133 134### Fixed 135 136| Index | Severity | Update | Issue description | Issue source | 137| ----- | -------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 138| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 139 140------ 141 142## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin 143 144| Date | File | Build commit | Severity | 145| ---------- | :------------------------------------------------ | ------------------------------------------- | -------- | 146| 2022-11-17 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin | rtt:a40f17d#hal:b569247#battery_ipc:c62dd55 | critical | 147 148### New 149 1501. Sc3338 add 1152x648@60fps 27M mclk bining config，chose this config as default. 1512. Add gc3003 sensor support. 152 153### Fixed 154 155| Index | Severity | Update | Issue description | Issue source | 156| ----- | -------- | ------------------------------ | ------------------------------------------------------------ | ------------ | 157| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 158 159------ 160 161## rv1106_hpmcu_wrap_v1.53.bin 162 163| Date | File | Build commit | Severity | 164| ---------- | :-------------------------- | ------------------------------- | -------- | 165| 2022-11-16 | rv1106_hpmcu_wrap_v1.53.bin | rockit_ko:c9653fe9#hal:a76806e7 | important | 166 167### Fixed 168 169| Index | Severity | Update | Issue source | Issue | 170| ----- | --------- | --------------------------- | --------------------------------- | -------- | 171| 1 | important | adjust QOS policy | ISP probabilistic mipi drop frame | - | 172| 2 | important | stop the mcu when rebooting | probabilistic stuck during reboot | - | 173 174------ 175 176## rv1106_ddr_924MHz{_tb}_v1.10.bin 177 178| Date | File | Build commit | Severity | 179| ---------- | :------------------------------- | ------------ | --------- | 180| 2022-11-15 | rv1106_ddr_924MHz{_tb}_v1.10.bin | ec2fae0c96 | important | 181 182### Fixed 183 184| Index | Severity | Update | Issue description | Issue source | 185| ----- | --------- | --------------------------------------------------- | --------------------------------------------------- | ------------ | 186| 1 | important | Change reg_fb1xclk_invdelaysel_dqcmd（except DDR2） | DDR may be unstable under specific freq and voltage | - | 187| 2 | moderate | Improve write trian pattern | Improve the accuracy of write train | - | 188 189------ 190 191## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin 192 193| Date | File | Build commit | Severity | 194| --------- | :----------------------------------------- | ---------------------------------------------- | --------- | 195| 2022-11-1 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin | rtt:05d3e965d#hal:b569247c#battery_ipc:bc3785d | important | 196 197### Fixed 198 199| Index | Severity | Update | Issue description | Issue source | 200| ----- | --------- | ------------------------------------------------------- | ------------------------------------------------ | ------------ | 201| 1 | important | Fixed sc3338 horizontal stripes when in dark brightness | sc3338 has horizontal stripes in dark brightness | - | 202 203------ 204## rv1106_hpmcu_tb_gc2093_v1.30.bin 205 206| Date | File | Build commit | Severity | 207| ---------- | :------------------------------- | ------------------------------------------------------------ | -------- | 208| 2022-10-27 | rv1106_hpmcu_tb_gc2093_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c#rtt-cherry-pick:8b1555259 | important | 209 210### New 211 2121. Add gc2093 sensor support. 213 214------ 215## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin 216 217| Date | File | Build Commit | Severity | 218| ---------- | :----------------------------------------- | ------------------------------------------------ | -------- | 219| 2022-10-20 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c | important | 220 221### New 222 2231. Add support for LTR308 digital light sensor. 2242. Add support for hdr. 225 226### Fixed 227 228| Index | Severity | Update | Issue description | Issue source | 229| ----- | --------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 230| 1 | important | Fixed 0 address flushed | When the spi nor flash is in 1-wire mode, spl data is flushed, so spl cannot be started. | - | 231| 2 | important | Fix the shared memory cache operation | The ARM core cannot obtain the shared memory data in time. | - | 232 233------ 234## rv1106_hpmcu_wrap_v1.50.bin 235 236| Date | File | Build commit | Severity | 237| ---------- | :-------------------------- | ------------------------------- | -------- | 238| 2022-09-29 | rv1106_hpmcu_wrap_v1.50.bin | rockit_ko:576377cb#hal:a76806e7 | critical | 239 240### Fixed 241 242| Index | Severity | Update | Issue description | Issue source | 243| ----- | --------- | -------------------------- | ------------------------------------------ | ------------ | 244| 1 | moderate | optimize code | decrease code size and add log information | - | 245| 2 | important | increase encoder ddr qos | slove some wrap overflow | - | 246| 3 | critical | invalite icache and dcache | destory linux memory for cache exchange | - | 247 248------ 249 250## rv1106_hpmcu_wrap_v1.46.bin 251 252| Date | File | Build commit | Severity | 253| ---------- | :-------------------------- | ------------------------------- | --------- | 254| 2022-09-08 | rv1106_hpmcu_wrap_v1.46.bin | rockit_ko:7e8fe8af#hal:a76806e7 | important | 255 256### Fixed 257 258| Index | Severity | Update | Issue description | Issue source | 259| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | 260| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | - | 261| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | - | 262| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | - | 263 264------ 265 266## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin 267 268| Date | File | Build Commit | Severity | 269| ---------- | :-------------------------------- | ---------- | --------- | 270| 2022-09-03 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin | rtt:efa791c#hal:b569247#battery_ipc:d5fb92e | critical | 271 272### New 273 2741. Support full parameters in aiq for the first frame in fastboot. 2752. Support set resolution and fps from meta partition. 2763. Support sync meta header file. 2774. Optimize the iq result for fast AE,The exposure decomposition is exactly consistent with aiq, supports DB gain synsensor, and supports the check exposure register. 2785. Enable AE statistics in full-parameter parallel solution. 2796. Meta addresses can be configured using menuconfig. 280 281### Fixed 282 283| Index | Severity | Update | Issue description | Issue source | 284| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 285| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | - | 286| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | - | 287| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | - | 288| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | - | 289