1# RV1106 Release Note 2 3## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :------------------------------------------------------- | ---------------------------------------------- | -------- | 7| 2023-01-05 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:dacbbc1 | critical | 8 9### Fixed 10 11| Index | Severity | Update | Issue description | Issue source | 12| ----- | -------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 13| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 14| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 15 16------ 17 18## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin 19| Date | File | build commit | Severity | 20| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 21| 2022-12-22 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin | rtt:755701b24#hal:d93ef9fd#battery_ipc:18df679ea | critical | 22 23### New 24 251. Add sc4336 support. 262. Fast ae supports up to 20 frames as default. 273. Add IR/white light mode support. 284. Add support for nonlinear single range ADC. 295. Add support for soft light sensor. 306. Supports the configuration of fast ae run frame number 31 32### Fixed 33 34| Index | Severity | Update | Issue description | Issue source | 35| ----- | -------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 36| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 37 38------ 39 40## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin 41 42| Date | File | Build commit | Severity | 43| ---------- | :------------------------------------------------ | ------------------------------------------- | -------- | 44| 2022-11-17 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin | rtt:a40f17d#hal:b569247#battery_ipc:c62dd55 | critical | 45 46### New 47 481. sc3338 add 1152x648@60fps 27M mclk bining config，chose this config as default. 492. add gc3003 sensor support. 50 51### Fixed 52 53| Index | Severity | Update | Issue description | Issue source | 54| ----- | -------- | ------------------------------ | ------------------------------------------------------------ | ------------ | 55| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 56 57------ 58 59## rv1106_hpmcu_wrap_v1.53.bin 60 61| Date | File | Build commit | Severity | 62| ---------- | :-------------------------- | ------------------------------- | -------- | 63| 2022-11-16 | rv1106_hpmcu_wrap_v1.53.bin | rockit_ko:c9653fe9#hal:a76806e7 | important | 64 65### Fixed 66 67| Index | Severity | Update | Issue source | Issue | 68| ----- | --------- | --------------------------- | --------------------------------- | -------- | 69| 1 | important | adjust QOS policy | ISP probabilistic mipi drop frame | - | 70| 2 | important | stop the mcu when rebooting | probabilistic stuck during reboot | - | 71 72------ 73 74## rv1106_ddr_924MHz{_tb}_v1.10.bin 75 76| Date | File | Build commit | Severity | 77| ---------- | :------------------------------- | ------------ | --------- | 78| 2022-11-15 | rv1106_ddr_924MHz{_tb}_v1.10.bin | ec2fae0c96 | important | 79 80### Fixed 81 82| Index | Severity | Update | Issue description | Issue source | 83| ----- | --------- | --------------------------------------------------- | --------------------------------------------------- | ------------ | 84| 1 | important | Change reg_fb1xclk_invdelaysel_dqcmd（except DDR2） | DDR may be unstable under specific freq and voltage | - | 85| 2 | moderate | Improve write trian pattern | Improve the accuracy of write train | - | 86 87------ 88 89## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin 90 91| Date | File | Build commit | Severity | 92| --------- | :----------------------------------------- | ---------------------------------------------- | --------- | 93| 2022-11-1 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin | rtt:05d3e965d#hal:b569247c#battery_ipc:bc3785d | important | 94 95### Fixed 96 97| Index | Severity | Update | Issue description | Issue source | 98| ----- | --------- | ------------------------------------------------------- | ------------------------------------------------ | ------------ | 99| 1 | important | Fixed sc3338 horizontal stripes when in dark brightness | sc3338 has horizontal stripes in dark brightness | - | 100 101------ 102## rv1106_hpmcu_tb_gc2093_v1.30.bin 103 104| Date | File | Build commit | Severity | 105| ---------- | :------------------------------- | ------------------------------------------------------------ | -------- | 106| 2022-10-27 | rv1106_hpmcu_tb_gc2093_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c#rtt-cherry-pick:8b1555259 | important | 107 108### New 109 1101. add gc2093 sensor support 111 112------ 113## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin 114 115| Date | File | Build Commit | Severity | 116| ---------- | :----------------------------------------- | ------------------------------------------------ | -------- | 117| 2022-10-20 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c | important | 118 119### New 120 1211. Add support for LTR308 digital light sensor. 1222. Add support for hdr. 123 124### Fixed 125 126| Index | Severity | Update | Issue description | Issue source | 127| ----- | --------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 128| 1 | important | Fixed 0 address flushed | When the spi nor flash is in 1-wire mode, spl data is flushed, so spl cannot be started. | - | 129| 2 | important | Fix the shared memory cache operation | The ARM core cannot obtain the shared memory data in time. | - | 130 131------ 132## rv1106_hpmcu_wrap_v1.50.bin 133 134| Date | File | Build commit | Severity | 135| ---------- | :-------------------------- | ------------------------------- | -------- | 136| 2022-09-29 | rv1106_hpmcu_wrap_v1.50.bin | rockit_ko:576377cb#hal:a76806e7 | critical | 137 138### Fixed 139 140| Index | Severity | Update | Issue description | Issue source | 141| ----- | --------- | -------------------------- | ------------------------------------------ | ------------ | 142| 1 | moderate | optimize code | decrease code size and add log information | - | 143| 2 | important | increase encoder ddr qos | slove some wrap overflow | - | 144| 3 | critical | invalite icache and dcache | destory linux memory for cache exchange | - | 145 146------ 147 148## rv1106_hpmcu_wrap_v1.46.bin 149 150| Date | File | Build commit | Severity | 151| ---------- | :-------------------------- | ------------------------------- | --------- | 152| 2022-09-08 | rv1106_hpmcu_wrap_v1.46.bin | rockit_ko:7e8fe8af#hal:a76806e7 | important | 153 154### Fixed 155 156| Index | Severity | Update | Issue description | Issue source | 157| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | 158| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | - | 159| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | - | 160| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | - | 161 162------ 163 164## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin 165 166| Date | File | Build Commit | Severity | 167| ---------- | :-------------------------------- | ---------- | --------- | 168| 2022-09-03 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin | rtt:efa791c#hal:b569247#battery_ipc:d5fb92e | critical | 169 170### New 171 1721. Support full parameters in aiq for the first frame in fastboot. 1732. Support set resolution and fps from meta partition. 1743. Support sync meta header file. 1754. Optimize the iq result for fast AE,The exposure decomposition is exactly consistent with aiq, supports DB gain synsensor, and supports the check exposure register 1765. Enable AE statistics in full-parameter parallel solution. 1776. Meta addresses can be configured using menuconfig 178 179### Fixed 180 181| Index | Severity | Update | Issue description | Issue source | 182| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 183| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | - | 184| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | - | 185| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | - | 186| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | - | 187