1# RV1106 Release Note 2 3## rv1106_hpmcu_tb_gc2093_v1.64.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 7| 2023-03-31 | rv1106_hpmcu_tb_gc2093_v1.64.bin | rtt:bd3010959#hal:e2f3eac3#battery_ipc:61d3fb5 | important | 8 9### New 10 111. Sync with AIQ V5.0x1.2-rc2. 12 13------ 14 15## rv1106_usbplug_v1.07.bin 16 17| Date | File | Build commit | Severity | 18| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 19| 2023-03-16 | rv1106_usbplug_v1.07.bin | I6b73e5e | important | 20 21### New 22 231. Support new spi flash. 24 25------ 26 27## rv1106_ddr_924MHz{_tb}_v1.11.bin 28 29| Date | File | Build commit | Severity | 30| ---------- | :------------------------------- | ------------ | --------- | 31| 2023-03-28 | rv1106_ddr_924MHz{_tb}_v1.11.bin | 285bced5c1 | important | 32 33### Fixed 34 35| Index | Severity | Update | Issue description | Issue source | 36| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 37| 1 | important | Change DDR3 CLK drv of QFN | DDR may be unstable in certain scenarios | - | 38 39------ 40 41## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin 42 43| Date | File | Build commit | Severity | 44| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 45| 2023-03-24 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin | rtt:c6b03745b#hal:d93ef9fd#battery_ipc:f52bf08 | critical | 46 47### New 48 491. Add dual sc3338 camera driver support. 502. Support to get DPHY, VICAP, CSI2HOST device info from board config. 513. Support dual camera fastboot. 52 53------ 54 55## rv1106_hpmcu_tb_gc2093_v1.63.bin 56 57| Date | File | Build commit | Severity | 58| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 59| 2023-03-07 | rv1106_hpmcu_tb_gc2093_v1.63.bin | rtt:831ea1368#hal:d93ef9fd#battery_ipc:12d4661 | important | 60 61### New 62 631. Gc2093 add 1920x1080@25fps 27M mclk. 64 65------ 66 67## rv1106_hpmcu_tb_gc2093_v1.62.bin 68 69| Date | File | Build commit | Severity | 70| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 71| 2023-02-16 | rv1106_hpmcu_tb_gc2093_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 72 73### New 74 751. Fast ae supports up to 20 frames as default. 762. Add IR/white light mode support. 773. Add support for nonlinear single range ADC. 784. Add support for soft light sensor. 795. Supports the configuration of fast ae run frame number. 80 81### Fixed 82 83| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 84| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 85| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 86 87------ 88 89## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin 90 91| Date | File | Build commit | Severity | 92| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 93| 2023-02-01 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 94 95### Fixed 96 97| Index | Severity | Update | Issue source | Issue | 98| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ----- | 99| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 100 101------ 102 103## rv1106_hpmcu_wrap_v1.54.bin 104 105| Date | File | Build commit | Severity | 106| ---------- | :-------------------------- | ------------------------------- | -------- | 107| 2023-1-15 | rv1106_hpmcu_wrap_v1.54.bin | rockit_ko:69d42563#hal:a76806e7 | important | 108 109### Fixed 110 111| Index | Severity | Update | Issue source | Issue | 112| ----- | --------- | --------------------------- | --------------------------------- | -------- | 113| 1 | important | Increase the monitoring conditions of wrap OVERFLOW | image tear possiable | - | 114 115------ 116 117## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin 118 119| Date | File | Build commit | Severity | 120| ---------- | :------------------------------------------------------- | ---------------------------------------------- | -------- | 121| 2023-01-05 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:dacbbc1 | critical | 122 123### Fixed 124 125| Index | Severity | Update | Issue description | Issue source | 126| ----- | -------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 127| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 128| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 129 130------ 131 132## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin 133| Date | File | build commit | Severity | 134| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 135| 2022-12-22 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin | rtt:755701b24#hal:d93ef9fd#battery_ipc:18df679ea | critical | 136 137### New 138 1391. Add sc4336 support. 1402. Fast ae supports up to 20 frames as default. 1413. Add IR/white light mode support. 1424. Add support for nonlinear single range ADC. 1435. Add support for soft light sensor. 1446. Supports the configuration of fast ae run frame number. 145 146### Fixed 147 148| Index | Severity | Update | Issue description | Issue source | 149| ----- | -------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 150| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 151 152------ 153 154## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin 155 156| Date | File | Build commit | Severity | 157| ---------- | :------------------------------------------------ | ------------------------------------------- | -------- | 158| 2022-11-17 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin | rtt:a40f17d#hal:b569247#battery_ipc:c62dd55 | critical | 159 160### New 161 1621. Sc3338 add 1152x648@60fps 27M mclk bining config，chose this config as default. 1632. Add gc3003 sensor support. 164 165### Fixed 166 167| Index | Severity | Update | Issue description | Issue source | 168| ----- | -------- | ------------------------------ | ------------------------------------------------------------ | ------------ | 169| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 170 171------ 172 173## rv1106_hpmcu_wrap_v1.53.bin 174 175| Date | File | Build commit | Severity | 176| ---------- | :-------------------------- | ------------------------------- | -------- | 177| 2022-11-16 | rv1106_hpmcu_wrap_v1.53.bin | rockit_ko:c9653fe9#hal:a76806e7 | important | 178 179### Fixed 180 181| Index | Severity | Update | Issue source | Issue | 182| ----- | --------- | --------------------------- | --------------------------------- | -------- | 183| 1 | important | adjust QOS policy | ISP probabilistic mipi drop frame | - | 184| 2 | important | stop the mcu when rebooting | probabilistic stuck during reboot | - | 185 186------ 187 188## rv1106_ddr_924MHz{_tb}_v1.10.bin 189 190| Date | File | Build commit | Severity | 191| ---------- | :------------------------------- | ------------ | --------- | 192| 2022-11-15 | rv1106_ddr_924MHz{_tb}_v1.10.bin | ec2fae0c96 | important | 193 194### Fixed 195 196| Index | Severity | Update | Issue description | Issue source | 197| ----- | --------- | --------------------------------------------------- | --------------------------------------------------- | ------------ | 198| 1 | important | Change reg_fb1xclk_invdelaysel_dqcmd（except DDR2） | DDR may be unstable under specific freq and voltage | - | 199| 2 | moderate | Improve write trian pattern | Improve the accuracy of write train | - | 200 201------ 202 203## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin 204 205| Date | File | Build commit | Severity | 206| --------- | :----------------------------------------- | ---------------------------------------------- | --------- | 207| 2022-11-1 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin | rtt:05d3e965d#hal:b569247c#battery_ipc:bc3785d | important | 208 209### Fixed 210 211| Index | Severity | Update | Issue description | Issue source | 212| ----- | --------- | ------------------------------------------------------- | ------------------------------------------------ | ------------ | 213| 1 | important | Fixed sc3338 horizontal stripes when in dark brightness | sc3338 has horizontal stripes in dark brightness | - | 214 215------ 216 217## rv1106_hpmcu_tb_gc2093_v1.30.bin 218 219| Date | File | Build commit | Severity | 220| ---------- | :------------------------------- | ------------------------------------------------------------ | -------- | 221| 2022-10-27 | rv1106_hpmcu_tb_gc2093_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c#rtt-cherry-pick:8b1555259 | important | 222 223### New 224 2251. Add gc2093 sensor support. 226 227------ 228 229## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin 230 231| Date | File | Build Commit | Severity | 232| ---------- | :----------------------------------------- | ------------------------------------------------ | -------- | 233| 2022-10-20 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c | important | 234 235### New 236 2371. Add support for LTR308 digital light sensor. 2382. Add support for hdr. 239 240### Fixed 241 242| Index | Severity | Update | Issue description | Issue source | 243| ----- | --------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 244| 1 | important | Fixed 0 address flushed | When the spi nor flash is in 1-wire mode, spl data is flushed, so spl cannot be started. | - | 245| 2 | important | Fix the shared memory cache operation | The ARM core cannot obtain the shared memory data in time. | - | 246 247------ 248 249## rv1106_hpmcu_wrap_v1.50.bin 250 251| Date | File | Build commit | Severity | 252| ---------- | :-------------------------- | ------------------------------- | -------- | 253| 2022-09-29 | rv1106_hpmcu_wrap_v1.50.bin | rockit_ko:576377cb#hal:a76806e7 | critical | 254 255### Fixed 256 257| Index | Severity | Update | Issue description | Issue source | 258| ----- | --------- | -------------------------- | ------------------------------------------ | ------------ | 259| 1 | moderate | optimize code | decrease code size and add log information | - | 260| 2 | important | increase encoder ddr qos | slove some wrap overflow | - | 261| 3 | critical | invalite icache and dcache | destory linux memory for cache exchange | - | 262 263------ 264 265## rv1106_hpmcu_wrap_v1.46.bin 266 267| Date | File | Build commit | Severity | 268| ---------- | :-------------------------- | ------------------------------- | --------- | 269| 2022-09-08 | rv1106_hpmcu_wrap_v1.46.bin | rockit_ko:7e8fe8af#hal:a76806e7 | important | 270 271### Fixed 272 273| Index | Severity | Update | Issue description | Issue source | 274| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | 275| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | - | 276| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | - | 277| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | - | 278 279------ 280 281## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin 282 283| Date | File | Build Commit | Severity | 284| ---------- | :-------------------------------- | ---------- | --------- | 285| 2022-09-03 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin | rtt:efa791c#hal:b569247#battery_ipc:d5fb92e | critical | 286 287### New 288 2891. Support full parameters in aiq for the first frame in fastboot. 2902. Support set resolution and fps from meta partition. 2913. Support sync meta header file. 2924. Optimize the iq result for fast AE,The exposure decomposition is exactly consistent with aiq, supports DB gain synsensor, and supports the check exposure register. 2935. Enable AE statistics in full-parameter parallel solution. 2946. Meta addresses can be configured using menuconfig. 295 296### Fixed 297 298| Index | Severity | Update | Issue description | Issue source | 299| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 300| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | - | 301| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | - | 302| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | - | 303| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | - | 304