1# RV1106 Release Note 2 3## rv1106_hpmcu_tb_gc2093_v1.62.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 7| 2023-02-16 | rv1106_hpmcu_tb_gc2093_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 8 9### New 10 111. Fast ae supports up to 20 frames as default. 122. Add IR/white light mode support. 133. Add support for nonlinear single range ADC. 144. Add support for soft light sensor. 155. Supports the configuration of fast ae run frame number. 16 17### Fixed 18 19| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 20| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 21| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 22 23------ 24 25## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin 26 27| Date | File | Build commit | Severity | 28| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 29| 2023-02-01 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 30 31### Fixed 32 33| Index | Severity | Update | Issue source | Issue | 34| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ----- | 35| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 36 37------ 38 39## rv1106_hpmcu_wrap_v1.54.bin 40 41| Date | File | Build commit | Severity | 42| ---------- | :-------------------------- | ------------------------------- | -------- | 43| 2023-1-15 | rv1106_hpmcu_wrap_v1.54.bin | rockit_ko:69d42563#hal:a76806e7 | important | 44 45### Fixed 46 47| Index | Severity | Update | Issue source | Issue | 48| ----- | --------- | --------------------------- | --------------------------------- | -------- | 49| 1 | important | Increase the monitoring conditions of wrap OVERFLOW | image tear possiable | - | 50 51------ 52 53## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin 54 55| Date | File | Build commit | Severity | 56| ---------- | :------------------------------------------------------- | ---------------------------------------------- | -------- | 57| 2023-01-05 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:dacbbc1 | critical | 58 59### Fixed 60 61| Index | Severity | Update | Issue description | Issue source | 62| ----- | -------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 63| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 64| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 65 66------ 67 68## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin 69| Date | File | build commit | Severity | 70| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 71| 2022-12-22 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin | rtt:755701b24#hal:d93ef9fd#battery_ipc:18df679ea | critical | 72 73### New 74 751. Add sc4336 support. 762. Fast ae supports up to 20 frames as default. 773. Add IR/white light mode support. 784. Add support for nonlinear single range ADC. 795. Add support for soft light sensor. 806. Supports the configuration of fast ae run frame number. 81 82### Fixed 83 84| Index | Severity | Update | Issue description | Issue source | 85| ----- | -------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 86| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 87 88------ 89 90## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin 91 92| Date | File | Build commit | Severity | 93| ---------- | :------------------------------------------------ | ------------------------------------------- | -------- | 94| 2022-11-17 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin | rtt:a40f17d#hal:b569247#battery_ipc:c62dd55 | critical | 95 96### New 97 981. Sc3338 add 1152x648@60fps 27M mclk bining config，chose this config as default. 992. Add gc3003 sensor support. 100 101### Fixed 102 103| Index | Severity | Update | Issue description | Issue source | 104| ----- | -------- | ------------------------------ | ------------------------------------------------------------ | ------------ | 105| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 106 107------ 108 109## rv1106_hpmcu_wrap_v1.53.bin 110 111| Date | File | Build commit | Severity | 112| ---------- | :-------------------------- | ------------------------------- | -------- | 113| 2022-11-16 | rv1106_hpmcu_wrap_v1.53.bin | rockit_ko:c9653fe9#hal:a76806e7 | important | 114 115### Fixed 116 117| Index | Severity | Update | Issue source | Issue | 118| ----- | --------- | --------------------------- | --------------------------------- | -------- | 119| 1 | important | adjust QOS policy | ISP probabilistic mipi drop frame | - | 120| 2 | important | stop the mcu when rebooting | probabilistic stuck during reboot | - | 121 122------ 123 124## rv1106_ddr_924MHz{_tb}_v1.10.bin 125 126| Date | File | Build commit | Severity | 127| ---------- | :------------------------------- | ------------ | --------- | 128| 2022-11-15 | rv1106_ddr_924MHz{_tb}_v1.10.bin | ec2fae0c96 | important | 129 130### Fixed 131 132| Index | Severity | Update | Issue description | Issue source | 133| ----- | --------- | --------------------------------------------------- | --------------------------------------------------- | ------------ | 134| 1 | important | Change reg_fb1xclk_invdelaysel_dqcmd（except DDR2） | DDR may be unstable under specific freq and voltage | - | 135| 2 | moderate | Improve write trian pattern | Improve the accuracy of write train | - | 136 137------ 138 139## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin 140 141| Date | File | Build commit | Severity | 142| --------- | :----------------------------------------- | ---------------------------------------------- | --------- | 143| 2022-11-1 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin | rtt:05d3e965d#hal:b569247c#battery_ipc:bc3785d | important | 144 145### Fixed 146 147| Index | Severity | Update | Issue description | Issue source | 148| ----- | --------- | ------------------------------------------------------- | ------------------------------------------------ | ------------ | 149| 1 | important | Fixed sc3338 horizontal stripes when in dark brightness | sc3338 has horizontal stripes in dark brightness | - | 150 151------ 152## rv1106_hpmcu_tb_gc2093_v1.30.bin 153 154| Date | File | Build commit | Severity | 155| ---------- | :------------------------------- | ------------------------------------------------------------ | -------- | 156| 2022-10-27 | rv1106_hpmcu_tb_gc2093_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c#rtt-cherry-pick:8b1555259 | important | 157 158### New 159 1601. Add gc2093 sensor support. 161 162------ 163## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin 164 165| Date | File | Build Commit | Severity | 166| ---------- | :----------------------------------------- | ------------------------------------------------ | -------- | 167| 2022-10-20 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c | important | 168 169### New 170 1711. Add support for LTR308 digital light sensor. 1722. Add support for hdr. 173 174### Fixed 175 176| Index | Severity | Update | Issue description | Issue source | 177| ----- | --------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 178| 1 | important | Fixed 0 address flushed | When the spi nor flash is in 1-wire mode, spl data is flushed, so spl cannot be started. | - | 179| 2 | important | Fix the shared memory cache operation | The ARM core cannot obtain the shared memory data in time. | - | 180 181------ 182## rv1106_hpmcu_wrap_v1.50.bin 183 184| Date | File | Build commit | Severity | 185| ---------- | :-------------------------- | ------------------------------- | -------- | 186| 2022-09-29 | rv1106_hpmcu_wrap_v1.50.bin | rockit_ko:576377cb#hal:a76806e7 | critical | 187 188### Fixed 189 190| Index | Severity | Update | Issue description | Issue source | 191| ----- | --------- | -------------------------- | ------------------------------------------ | ------------ | 192| 1 | moderate | optimize code | decrease code size and add log information | - | 193| 2 | important | increase encoder ddr qos | slove some wrap overflow | - | 194| 3 | critical | invalite icache and dcache | destory linux memory for cache exchange | - | 195 196------ 197 198## rv1106_hpmcu_wrap_v1.46.bin 199 200| Date | File | Build commit | Severity | 201| ---------- | :-------------------------- | ------------------------------- | --------- | 202| 2022-09-08 | rv1106_hpmcu_wrap_v1.46.bin | rockit_ko:7e8fe8af#hal:a76806e7 | important | 203 204### Fixed 205 206| Index | Severity | Update | Issue description | Issue source | 207| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | 208| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | - | 209| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | - | 210| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | - | 211 212------ 213 214## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin 215 216| Date | File | Build Commit | Severity | 217| ---------- | :-------------------------------- | ---------- | --------- | 218| 2022-09-03 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin | rtt:efa791c#hal:b569247#battery_ipc:d5fb92e | critical | 219 220### New 221 2221. Support full parameters in aiq for the first frame in fastboot. 2232. Support set resolution and fps from meta partition. 2243. Support sync meta header file. 2254. Optimize the iq result for fast AE,The exposure decomposition is exactly consistent with aiq, supports DB gain synsensor, and supports the check exposure register. 2265. Enable AE statistics in full-parameter parallel solution. 2276. Meta addresses can be configured using menuconfig. 228 229### Fixed 230 231| Index | Severity | Update | Issue description | Issue source | 232| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 233| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | - | 234| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | - | 235| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | - | 236| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | - | 237