1# RV1106 Release Note 2 3## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.64.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 7| 2023-04-04 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.64.bin | rtt:c6b03745b#hal:d93ef9fd#battery_ipc:12da3e7 | critical | 8 9### Fixed 10 11| Index | Severity | Update | Issue description | Issue source | 12| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 13| 1 | critical | Fix the camera_num not init. | If camera_num not init, it causes the drop cache to take much time | - | 14| 2 | important | Sync meta's head file. | Modify the partition of meta | - | 15| 3 | important | Fix the secondary camera mirror and flip parameter config error | the secondary camera mirror and flip parameter use the wrong config | - | 16 17------ 18 19## rv1106_hpmcu_tb_gc2093_v1.64.bin 20 21| Date | File | Build commit | Severity | 22| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 23| 2023-03-31 | rv1106_hpmcu_tb_gc2093_v1.64.bin | rtt:bd3010959#hal:e2f3eac3#battery_ipc:61d3fb5 | important | 24 25### New 26 271. Sync with AIQ V5.0x1.2-rc2. 28 29------ 30 31## rv1106_usbplug_v1.07.bin 32 33| Date | File | Build commit | Severity | 34| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 35| 2023-03-16 | rv1106_usbplug_v1.07.bin | I6b73e5e | important | 36 37### New 38 391. Support new spi flash. 40 41------ 42 43## rv1106_ddr_924MHz{_tb}_v1.11.bin 44 45| Date | File | Build commit | Severity | 46| ---------- | :------------------------------- | ------------ | --------- | 47| 2023-03-28 | rv1106_ddr_924MHz{_tb}_v1.11.bin | 285bced5c1 | important | 48 49### Fixed 50 51| Index | Severity | Update | Issue description | Issue source | 52| ----- | --------- | -------------------------- | ---------------------------------------- | ------------ | 53| 1 | important | Change DDR3 CLK drv of QFN | DDR may be unstable in certain scenarios | - | 54 55------ 56 57## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin 58 59| Date | File | Build commit | Severity | 60| ---------- | :----------------------------------------------------------- | ---------------------------------------------- | -------- | 61| 2023-03-24 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336,dual_sc3338}_v1.63.bin | rtt:c6b03745b#hal:d93ef9fd#battery_ipc:f52bf08 | critical | 62 63### New 64 651. Add dual sc3338 camera driver support. 662. Support to get DPHY, VICAP, CSI2HOST device info from board config. 673. Support dual camera fastboot. 68 69------ 70 71## rv1106_hpmcu_tb_gc2093_v1.63.bin 72 73| Date | File | Build commit | Severity | 74| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 75| 2023-03-07 | rv1106_hpmcu_tb_gc2093_v1.63.bin | rtt:831ea1368#hal:d93ef9fd#battery_ipc:12d4661 | important | 76 77### New 78 791. Gc2093 add 1920x1080@25fps 27M mclk. 80 81------ 82 83## rv1106_hpmcu_tb_gc2093_v1.62.bin 84 85| Date | File | Build commit | Severity | 86| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 87| 2023-02-16 | rv1106_hpmcu_tb_gc2093_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 88 89### New 90 911. Fast ae supports up to 20 frames as default. 922. Add IR/white light mode support. 933. Add support for nonlinear single range ADC. 944. Add support for soft light sensor. 955. Supports the configuration of fast ae run frame number. 96 97### Fixed 98 99| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 100| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 101| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 102 103------ 104 105## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin 106 107| Date | File | Build commit | Severity | 108| ---------- | :------------------------------------------------------- | ---------------------------------------------- | --------- | 109| 2023-02-01 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.62.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:12d4661 | critical | 110 111### Fixed 112 113| Index | Severity | Update | Issue source | Issue | 114| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ----- | 115| 1 | critical | In the soft light sensor scheme, the fastae converges before the fill light is stabilized in the night vision mode | Fastae converges before the fill light is stabilized in night vision mode, resulting in abnormal exposure. | - | 116 117------ 118 119## rv1106_hpmcu_wrap_v1.54.bin 120 121| Date | File | Build commit | Severity | 122| ---------- | :-------------------------- | ------------------------------- | -------- | 123| 2023-1-15 | rv1106_hpmcu_wrap_v1.54.bin | rockit_ko:69d42563#hal:a76806e7 | important | 124 125### Fixed 126 127| Index | Severity | Update | Issue source | Issue | 128| ----- | --------- | --------------------------- | --------------------------------- | -------- | 129| 1 | important | Increase the monitoring conditions of wrap OVERFLOW | image tear possiable | - | 130 131------ 132 133## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin 134 135| Date | File | Build commit | Severity | 136| ---------- | :------------------------------------------------------- | ---------------------------------------------- | -------- | 137| 2023-01-05 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.61.bin | rtt:5a5a088d0#hal:d93ef9fd#battery_ipc:dacbbc1 | critical | 138 139### Fixed 140 141| Index | Severity | Update | Issue description | Issue source | 142| ----- | -------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 143| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 144| 2 | critical | Fixed repeated ircut and light Settings. | Under analog light sensor, after setting night mode to 3/4, ircut and light will be set again in frame 6. | - | 145 146------ 147 148## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin 149| Date | File | build commit | Severity | 150| ---------- | :------------------------------------------------------- | ------------------------------------------------ | -------- | 151| 2022-12-22 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003,sc4336}_v1.60.bin | rtt:755701b24#hal:d93ef9fd#battery_ipc:18df679ea | critical | 152 153### New 154 1551. Add sc4336 support. 1562. Fast ae supports up to 20 frames as default. 1573. Add IR/white light mode support. 1584. Add support for nonlinear single range ADC. 1595. Add support for soft light sensor. 1606. Supports the configuration of fast ae run frame number. 161 162### Fixed 163 164| Index | Severity | Update | Issue description | Issue source | 165| ----- | -------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 166| 1 | critical | Fixed the gc3003 pre-opening problem. | If sensor stream on advanced，isp will met dqbuf sem failed error. | - | 167 168------ 169 170## rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin 171 172| Date | File | Build commit | Severity | 173| ---------- | :------------------------------------------------ | ------------------------------------------- | -------- | 174| 2022-11-17 | rv1106_hpmcu_tb_{sc230ai,sc3338,gc3003}_v1.50.bin | rtt:a40f17d#hal:b569247#battery_ipc:c62dd55 | critical | 175 176### New 177 1781. Sc3338 add 1152x648@60fps 27M mclk bining config，chose this config as default. 1792. Add gc3003 sensor support. 180 181### Fixed 182 183| Index | Severity | Update | Issue description | Issue source | 184| ----- | -------- | ------------------------------ | ------------------------------------------------------------ | ------------ | 185| 1 | critical | Limit camera convergence time. | Camera spends too much time converging，it causes the thunderboot isp driver in kernel fails to start stream. | - | 186 187------ 188 189## rv1106_hpmcu_wrap_v1.53.bin 190 191| Date | File | Build commit | Severity | 192| ---------- | :-------------------------- | ------------------------------- | -------- | 193| 2022-11-16 | rv1106_hpmcu_wrap_v1.53.bin | rockit_ko:c9653fe9#hal:a76806e7 | important | 194 195### Fixed 196 197| Index | Severity | Update | Issue source | Issue | 198| ----- | --------- | --------------------------- | --------------------------------- | -------- | 199| 1 | important | adjust QOS policy | ISP probabilistic mipi drop frame | - | 200| 2 | important | stop the mcu when rebooting | probabilistic stuck during reboot | - | 201 202------ 203 204## rv1106_ddr_924MHz{_tb}_v1.10.bin 205 206| Date | File | Build commit | Severity | 207| ---------- | :------------------------------- | ------------ | --------- | 208| 2022-11-15 | rv1106_ddr_924MHz{_tb}_v1.10.bin | ec2fae0c96 | important | 209 210### Fixed 211 212| Index | Severity | Update | Issue description | Issue source | 213| ----- | --------- | --------------------------------------------------- | --------------------------------------------------- | ------------ | 214| 1 | important | Change reg_fb1xclk_invdelaysel_dqcmd（except DDR2） | DDR may be unstable under specific freq and voltage | - | 215| 2 | moderate | Improve write trian pattern | Improve the accuracy of write train | - | 216 217------ 218 219## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin 220 221| Date | File | Build commit | Severity | 222| --------- | :----------------------------------------- | ---------------------------------------------- | --------- | 223| 2022-11-1 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.40.bin | rtt:05d3e965d#hal:b569247c#battery_ipc:bc3785d | important | 224 225### Fixed 226 227| Index | Severity | Update | Issue description | Issue source | 228| ----- | --------- | ------------------------------------------------------- | ------------------------------------------------ | ------------ | 229| 1 | important | Fixed sc3338 horizontal stripes when in dark brightness | sc3338 has horizontal stripes in dark brightness | - | 230 231------ 232 233## rv1106_hpmcu_tb_gc2093_v1.30.bin 234 235| Date | File | Build commit | Severity | 236| ---------- | :------------------------------- | ------------------------------------------------------------ | -------- | 237| 2022-10-27 | rv1106_hpmcu_tb_gc2093_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c#rtt-cherry-pick:8b1555259 | important | 238 239### New 240 2411. Add gc2093 sensor support. 242 243------ 244 245## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin 246 247| Date | File | Build Commit | Severity | 248| ---------- | :----------------------------------------- | ------------------------------------------------ | -------- | 249| 2022-10-20 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.30.bin | rtt:2ede82a43#hal:b569247c#battery_ipc:efaec692c | important | 250 251### New 252 2531. Add support for LTR308 digital light sensor. 2542. Add support for hdr. 255 256### Fixed 257 258| Index | Severity | Update | Issue description | Issue source | 259| ----- | --------- | ------------------------------------- | ------------------------------------------------------------ | ------------ | 260| 1 | important | Fixed 0 address flushed | When the spi nor flash is in 1-wire mode, spl data is flushed, so spl cannot be started. | - | 261| 2 | important | Fix the shared memory cache operation | The ARM core cannot obtain the shared memory data in time. | - | 262 263------ 264 265## rv1106_hpmcu_wrap_v1.50.bin 266 267| Date | File | Build commit | Severity | 268| ---------- | :-------------------------- | ------------------------------- | -------- | 269| 2022-09-29 | rv1106_hpmcu_wrap_v1.50.bin | rockit_ko:576377cb#hal:a76806e7 | critical | 270 271### Fixed 272 273| Index | Severity | Update | Issue description | Issue source | 274| ----- | --------- | -------------------------- | ------------------------------------------ | ------------ | 275| 1 | moderate | optimize code | decrease code size and add log information | - | 276| 2 | important | increase encoder ddr qos | slove some wrap overflow | - | 277| 3 | critical | invalite icache and dcache | destory linux memory for cache exchange | - | 278 279------ 280 281## rv1106_hpmcu_wrap_v1.46.bin 282 283| Date | File | Build commit | Severity | 284| ---------- | :-------------------------- | ------------------------------- | --------- | 285| 2022-09-08 | rv1106_hpmcu_wrap_v1.46.bin | rockit_ko:7e8fe8af#hal:a76806e7 | important | 286 287### Fixed 288 289| Index | Severity | Update | Issue description | Issue source | 290| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | 291| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | - | 292| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | - | 293| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | - | 294 295------ 296 297## rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin 298 299| Date | File | Build Commit | Severity | 300| ---------- | :-------------------------------- | ---------- | --------- | 301| 2022-09-03 | rv1106_hpmcu_tb_{sc230ai,sc3338}_v1.20.bin | rtt:efa791c#hal:b569247#battery_ipc:d5fb92e | critical | 302 303### New 304 3051. Support full parameters in aiq for the first frame in fastboot. 3062. Support set resolution and fps from meta partition. 3073. Support sync meta header file. 3084. Optimize the iq result for fast AE,The exposure decomposition is exactly consistent with aiq, supports DB gain synsensor, and supports the check exposure register. 3095. Enable AE statistics in full-parameter parallel solution. 3106. Meta addresses can be configured using menuconfig. 311 312### Fixed 313 314| Index | Severity | Update | Issue description | Issue source | 315| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 316| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | - | 317| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | - | 318| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | - | 319| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | - | 320