1# RK3588 Release Note 2 3## rk3588_bl32_v1.17.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :-------------------- | ------------ | --------- | 7| 2024-09-02 | rk3588_bl32_v1.17.bin | 6c78a7d8c | important | 8 9### New 10 111. Support software TA encryption key, customers can use TA encryption function without burning the key. 122. RPMB change read data to multiple times. 133. Increase MPI_MEMPOOL_SIZE size. 14 15------ 16 17## rk3588_bl31_v1.46.elf 18 19| Date | File | Build commit | Severity | 20| ---------- | :-------------------- | ------------ | --------- | 21| 2024-04-29 | rk3588_bl31_v1.46.elf | 588059758 | important | 22 23### New 24 251. Support to config pmu_mcu in kernel. 262. Improve stability of DFS in single chip lpddr5. 27 28------ 29 30## rk3588_bl32_v1.16.bin 31 32| Date | File | Build commit | Severity | 33| ---------- | :-------------------- | ------------ | --------- | 34| 2024-04-16 | rk3588_bl32_v1.16.bin | 185dc3c92 | important | 35 36### New 37 381. Optimization parameter check to enhance security. 392. Support printing TEE memory usage information. 403. Hardware crypto supports addresses exceeding 4G. 41 42------ 43 44## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin 45 46| Date | File | Build commit | Severity | 47| ---------- | :------------------------------------------- | ------------ | --------- | 48| 2024-04-12 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin | 3488111f83 | important | 49 50### Fixed 51 52| Index | Severity | Update | Issue description | Issue source | 53| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 54| 1 | important | Fixed the error of pll_id setting when boot_fsp!=0，the default value of boot_fsp is 0. | Maybe hang in ddr initialization when boot_fsp is configured to a non-zero value. | - | 55 56------ 57 58## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin 59 60| Date | File | Build commit | Severity | 61| ---------- | :------------------------------------------- | ------------ | --------- | 62| 2024-02-04 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin | 9fffbe1e78 | important | 63 64### New 65 661. Modify the LPDDR5 frequency to improve stability. 672. Add support dram with CS0 capacity less than CS1 capacity. 683. Modify the DERATEINT.mr4_read_interval configuration. 69 70### Fixed 71 72| Index | Severity | Update | Issue description | Issue source | 73| ----- | --------- | ------------------------------------------- | ------------------------------------------------------------ | ------------ | 74| 1 | important | Fixed derate issue with LPDDR5 of one rank. | Maybe hang in kernel when switch the frequency for LPDDR5 of one rank. | - | 75 76------ 77 78## rk3588_bl31_v1.45.elf 79 80| Date | File | Build commit | Severity | 81| ---------- | :-------------------- | ------------ | --------- | 82| 2023-12-27 | rk3588_bl31_v1.45.elf | 4ca8a8422 | important | 83 84### New 85 861. Optimize the time of DFS atfter system resume. 872. Cpu switch to hight frequency when systeme resume. 883. Support config pvtpll parameters by sip. 89 90------ 91 92## rk3588_pcie_v2.10.bin 93 94| Date | File | Build commit | Severity | 95| ---------- | --------------------- | ------------ | -------- | 96| 2023-12-18 | rk3588_pcie_v2.10.bin | 35f57cde3 | moderate | 97 98### New 99 1001. Update the version. 101 102------ 103 104## rk3588_pcie_v2.00.bin 105 106| Date | File | Build commit | Severity | 107| ---------- | --------------------- | ------------ | -------- | 108| 2023-12-06 | rk3588_pcie_v2.00.bin | I3e280b78 | moderate | 109 110### New 111 1121. Fix bar capacity. 113 114------ 115 116## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin 117 118| Date | File | Build commit | Severity | 119| ---------- | :------------------------------------------- | ------------ | --------- | 120| 2023-11-23 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin | d5483af87d | important | 121 122### New 123 1241. Avoid PHY skew value greater than dll lock value，improve the stability for 528MHz. 1252. Fix the data training process，improve the stability. 1263. Resume ZQ background calibration for LPDDR5. 127 128------ 129 130## rk3588_usbplug_v1.11.bin 131 132| Date | File | Build commit | Severity | 133| ---------- | :----------------------- | ------------ | --------- | 134| 2023-11-20 | rk3588_usbplug_v1.11.bin | dcac518e7 | important | 135 136### New 137 1381. Add rk3583 upgrade support. 139 140------ 141 142## rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin 143 144| Date | File | Build commit | Severity | 145| ---------- | :------------------------------------------- | ------------ | --------- | 146| 2023-11-10 | rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin | 73dffea49e | important | 147 148### New 149 1501. Add RK3583 support. 151 152------ 153 154## rk3588_bl31_v1.44.elf 155 156| Date | File | Build commit | Severity | 157| ---------- | :-------------------- | ------------ | --------- | 158| 2023-11-07 | rk3588_bl31_v1.44.elf | 4acbe711b | important | 159 160### New 161 1621. Add pvtpll support rk3583. 1632. Add support to read secure otp. 1643. Optimize the time of dmc restore. 165 166------ 167 168## rk3588_pcie_v1.00.bin 169 170| Date | File | Build commit | Severity | 171| ---------- | --------------------- | ------------ | -------- | 172| 2023-10-07 | rk3588_pcie_v1.00.bin | I01c2c7d7 | moderate | 173 174### New 175 1761. Add bare system executable firmware that supports PCIe EP initialization. 177 178------ 179 180## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin 181 182| Date | File | Build commit | Severity | 183| ---------- | :------------------------------------------- | ------------ | --------- | 184| 2023-09-26 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin | 73dffea49e | important | 185 186### New 187 1881. Improve the stability of LPDDR5. 1892. Add fwver support. 190 191------ 192 193## rk3588_bl32_v1.15.bin 194 195| Date | File | Build commit | Severity | 196| ---------- | :-------------------- | ------------ | --------- | 197| 2023-09-25 | rk3588_bl32_v1.15.bin | 62aa10b7 | important | 198 199### New 200 2011. Support print firmware version, and support transmit firmware version to subsequent firmware. 202 203------ 204 205## rk3588_bl31_v1.43.elf 206 207| Date | File | Build commit | Severity | 208| ---------- | :-------------------- | ------------ | --------- | 209| 2023-09-26 | rk3588_bl31_v1.43.elf | 24b7dd41a | important | 210 211### New 212 2131. Supports to pass bl31 version number through rk atags. 2142. Support to configure wake sources for virtual-poweroff through dts. 215 216------ 217 218## rk3588_spl_v1.13.bin 219 220| Date | File | Build commit | Severity | 221| ---------- | :------------------- | ------------ | --------- | 222| 2023-09-25 | rk3588_spl_v1.13.bin | e4e124926e | important | 223 224### New 225 2261. Print and pass the firmware version number. 227 228### Fixed 229 230| Index | Severity | Update | Issue description | Issue source | 231| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 232| 1 | important | Solve the issue that the backup image is not loaded when the SPL load or check u-boot.dtb fails | When u-boot.dtb of the first uboot.img is corrupted, SPL doesn't load the backup image. | - | 233------ 234 235## rk3588_bl31_v1.42.elf 236 237| Date | File | Build commit | Severity | 238| ---------- | :-------------------- | ------------ | --------- | 239| 2023-09-09 | rk3588_bl31_v1.42.elf | 87bcc5dfe | important | 240 241### New 242 2431. Optimize the time of system resume. 2442. Support any cpu to do system suspend/resume. 2453. Support all pwm int to wakeup when virtual-poweroff. 246 247------ 248 249## rk3588_bl32_v1.14.bin 250 251| Date | File | Build commit | Severity | 252| ---------- | :-------------------- | ------------ | --------- | 253| 2023-08-28 | rk3588_bl32_v1.14.bin | b5340fd65 | important | 254 255### New 256 2571. Pseudo random number seed will be set by default. 2582. Supports read and write security flag interfaces. 2593. Support check ta encryption key is written. 260 261### Fixed 262 263| Index | Severity | Update | Issue description | Issue source | 264| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------- | ------------ | 265| 1 | important | Fixed hardware crypto probability crash issue after enabling dynamic memory | Error will be reported when using hardware crypto | - | 266 267------ 268 269## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin 270 271| Date | File | Build commit | Severity | 272| ---------- | :------------------------------------------- | ------------ | --------- | 273| 2023-08-11 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin | 25cee80c4f | important | 274 275### Warn 276 2771. BL31 should be update to V1.41 or above. 278 279### New 280 2811. Improve the stability of LPDDR5 528MHz. 2822. Update vref_inner for each channel in fsp_param to improve stability. 283 284### Fixed 285 286| Index | Severity | Update | Issue description | Issue source | 287| ----- | --------- | ------------------------------------------------------------ | --------------------------------------------------------- | ------------ | 288| 1 | important | Fixed init fail issue that boot in high temperature environment | Panic in ddrbin when boot in high temperature environment | - | 289 290------ 291 292## rk3588_bl31_v1.41.elf 293 294| Date | File | Build commit | Severity | 295| ---------- | :-------------------- | ------------ | --------- | 296| 2023-08-10 | rk3588_bl31_v1.41.elf | b7c5102a2 | important | 297 298### New 299 3001. Support L3 partition. 3012. Update configuration of ddr vref_inner. 3023. Support to config MCU sleep parameter through DTS. 303 304------ 305 306## rk3588_bl31_v1.40.elf 307 308| Date | File | Build commit | Severity | 309| ---------- | :-------------------- | ------------ | --------- | 310| 2023-07-13 | rk3588_bl31_v1.40.elf | dc1125f48 | important | 311 312### New 313 3141. Add support to reset vop sub mem pd. 315 316------ 317 318## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin 319 320| Date | File | Build commit | Severity | 321| ---------- | :------------------------------------------- | ------------ | --------- | 322| 2023-07-06 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin | 52218f4949 | important | 323 324### New 325 3261. Add support print training result and mr value. 327 328### Fixed 329 330| Index | Severity | Update | Issue description | Issue source | 331| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 332| 1 | important | Fixed init fail issue that max freq between 1066-1600MHz | Panic in ddrbin when max DDR freq between 1066-1600MHz. | - | 333| 2 | important | Fixed the issue painc in ddrbin caused by multiple initialization of DDR | When the first SPL firmware failed to load, reloading the second firmware would result in repeated initialization of the DDR. This caused a panic in ddrbin. | - | 334 335------ 336 337## rk3588_bl31_v1.39.elf 338 339| Date | File | Build commit | Severity | 340| ---------- | :-------------------- | ------------ | --------- | 341| 2023-06-27 | rk3588_bl31_v1.39.elf | 001b4889e | important | 342 343### New 344 3451. Change read size to 128 bytes. 3462. Adjust pvtpll table by otp. 3473. Modify pvtpll table for rk3588j/m. 348 349------ 350 351## rk3588_bl31_v1.38.elf 352 353| Date | File | Build commit | Severity | 354| ---------- | :-------------------- | ------------ | --------- | 355| 2023-05-09 | rk3588_bl31_v1.38.elf | 3389cfdda | important | 356 357### Warn 358 3591. DDR bin should be update to V1.11 or above. 360 361### New 362 3631. Update configuration of ddr lp5 mr. 3642. Improve the stability of hdmirx. 3653. Support ddr spread spectrum mode. 366 367------ 368 369## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin 370 371| Date | File | Build commit | Severity | 372| ---------- | :------------------------------------------- | ------------ | --------- | 373| 2023-05-09 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin | f1474cf52f | important | 374 375### Warn 376 3771. BL31 should be update to V1.38 or above. 378 379### New 380 3811. Added more print info when initialization fails to help locate soldering issues. 3822. Optimizing boot time. 3833. Enable per bank refresh function. 3844. LPDDR5 4 channels use different write vref values to improve stability. 3855. First init LPDDR4x. 3866. LPDDR5 cavref update to 36%. 3877. Add support spread spectrum mode. 388 389------ 390 391## rk3588_bl32_v1.13.bin 392 393| Date | File | Build commit | Severity | 394| ---------- | :-------------------- | ------------ | --------- | 395| 2023-04-19 | rk3588_bl32_v1.13.bin | 7f1ea6d6e | important | 396 397### New 398 3991. OTP supports burst read to accelerate BL32 startup speed. 4002. Kernel support read secure boot flag and public key hash. 4013. Support dynamic shared memory, and the secure and normal world can transfer more larger data. 4024. BL32 supports pstore, and the kernel can view print info of BL32 through pstore node. 403 404------ 405 406## rk3588_bl31_v1.37.elf 407 408| Date | File | Build commit | Severity | 409| ---------- | :-------------------- | ------------ | --------- | 410| 2023-03-08 | rk3588_bl31_v1.37.elf | 9609b9c19 | important | 411 412### New 413 4141. Save/restore u2phy_grf registers when system suspend/resume. 4152. Save/restore more ddr related registers when system suspend/resume. 4163. Compatible with system suspend/resume in QNX. 417 418------ 419 420## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin 421 422| Date | File | Build commit | Severity | 423| ---------- | :------------------------------------------- | ------------ | --------- | 424| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin | 75d050770f | important | 425 426### New 427 4281. Pageclose can be enable/disable by ddrbin_tool. 429 430### Fixed 431 432| Index | Severity | Update | Issue description | Issue source | 433| ----- | --------- | ---------------------------- | ------------------------------------------------------------ | ------------ | 434| 1 | important | fix total 24GB bug | If the DDR total capacity is 24GB, it will be stuck and unable to enter kernel. | - | 435| 2 | important | fix LP4/LP4X stability issue | Some LP4/LP4X board need to update read odt to 40ohm to fix stability issue. Note: BL31 should be update to V1.37. | - | 436| 3 | important | improve LP5 performance | LPDDR5 timing tWTR calculate error lead to slow performance | - | 437 438------ 439 440## rk3588_bl31_v1.36.elf 441 442| Date | File | Build commit | Severity | 443| ---------- | :-------------------- | ------------ | --------- | 444| 2023-01-30 | rk3588_bl31_v1.36.elf | 78ee25fe7 | important | 445 446### New 447 4481. Supports analyze infrared signals of various protocols during system suspend by software, which needs to be used together with mcu. 449 450------ 451 452## rk3588_bl31_v1.35.elf 453 454| Date | File | Build commit | Severity | 455| ---------- | :-------------------- | ------------ | --------- | 456| 2023-01-16 | rk3588_bl31_v1.35.elf | bd7bac37a | important | 457 458### New 459 4601. Improve the stability of hdmirx. 461 462------ 463 464## rk3588_bl31_v1.34.elf 465 466| Date | File | Build commit | Severity | 467| ---------- | :-------------------- | ------------ | --------- | 468| 2023-01-10 | rk3588_bl31_v1.34.elf | e63a16361 | important | 469 470### New 471 4721. Support hptimer to use soft adjust mode. 4732. Support pvtpll to add length. 474 475### Fixed 476 477| Index | Severity | Update | Issue description | Issue source | 478| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ | 479| 1 | important | Avoid pmu mcu to boot accidentally in system suspend. | With pmu mcu's accidental boot, linux kernel's code and data may be overwrite after system resume. | - | 480 481------ 482 483## rk3588_spl_v1.12.bin 484 485| Date | File | Build commit | Severity | 486| ---------- | :-------------------- | ------------ | --------- | 487| 2022-12-26 | rk3588_spl_v1.12.bin | 5f53abfa | important | 488 489### New 490 4911. Support SPL AB. 492 493------ 494 495## rk3588_bl31_v1.33.elf 496 497| Date | File | Build commit | Severity | 498| ---------- | :-------------------- | ------------ | --------- | 499| 2022-12-07 | rk3588_bl31_v1.33.elf | 17b41886e | important | 500 501### New 502 5031. Support rk3588m, rk3588j. 504 505------ 506 507## rk3588_usbplug_v1.10.bin 508 509| Date | File | Build commit | Severity | 510| ---------- | :----------------------- | ------------ | --------- | 511| 2022-11-22 | rk3588_usbplug_v1.10.bin | b0e3c43c2 | important | 512 513### New 514 5151. Improve compatibility. 516 517------ 518 519## rk3588_bl31_v1.32.elf 520 521| Date | File | Build commit | Severity | 522| ---------- | :-------------------- | ------------ | --------- | 523| 2022-11-21 | rk3588_bl31_v1.32.elf | e529a2760 | important | 524 525### New 526 5271. Support bus auto CS. 528 529------ 530 531## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin 532 533| Date | File | Build commit | Severity | 534| ---------- | :------------------------------------------- | ------------ | --------- | 535| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin | a930779e06 | important | 536 537### New 538 5391. Derate/perbank refresh can be enable/disable by ddrbin_tool. 5402. Support pstore function. 5413. Boot FSP configurable by ddrbin_tool. 5424. Enable LPDDR5 DMC function. 5435. Support LPDDR5 byte mode DRAM. 5446. Recycle 256MB memory(overlap with REG space). This function can be disable by ddrbin_tool. 545 546### Fixed 547 548| Index | Severity | Update | Issue description | Issue source | 549| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 550| 1 | important | Fix WRTRN Bug | Fix WRTRN bug when ddr freq between 533MHz - 1066MHz | - | 551| 2 | important | Fix ZQCALIB bug | Increase auto ZQCALIB command period to 470ms | - | 552| 3 | important | Fix 528M bug | 528MHz undo RDTRN, SW*skew should be clean before clean before switch to 528MHz. | - | 553| 4 | important | Improve LPDDR5 stability and performance | Fix some LPDDR5 timing like rd2wr,wr2rd and hash config to improve stability and performance. | - | 554| 5 | important | LP4/LP4x support 32GB cap | LP4/LP4x support 32GB cap | - | 555 556------ 557 558## rk3588_bl31_v1.31.elf 559 560| Date | File | Build commit | Severity | 561| ---------- | :-------------------- | ------------ | --------- | 562| 2022-11-09 | rk3588_bl31_v1.31.elf | 91e396185 | important | 563 564### New 565 5661. Enable RK_ENABLE_A76_L2_FLUSH_TO_L3 function. 5672. Support amp function. 568 569### Fixed 570 571| Index | Severity | Update | Issue description | Issue source | 572| ----- | --------- | ------------------------------------------------------------ | ----------------- | ------------ | 573| 1 | important | Save/restore some performance setting in system suspend/resume | - | - | 574 575------ 576 577## rk3588_bl31_v1.30.elf 578 579| Date | File | Build commit | Severity | 580| ---------- | :-------------------- | ------------ | --------- | 581| 2022-10-12 | rk3588_bl31_v1.30.elf | 1450d21e8 | important | 582 583### New 584 5851. Support pstore. 586 587------ 588 589## rk3588_bl31_v1.29.elf 590 591| Date | File | Build commit | Severity | 592| ---------- | :-------------------- | ----------- | --------- | 593| 2022-09-29 | rk3588_bl31_v1.29.elf | 686b5c48b | important | 594 595### New 596 5971. Add A55 AT speculative patches. 5982. Add LPDDR5 DFS patches, support DFS between rows. 5993. Config FW-DSU region according to the specific DDR channel. 600 601### Fixed 602 603| Index | Severity | Update | Issue description | Issue source | 604| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 605| 1 | important | Fix problem about CEC wakeup. | When waiting for CEC wakeup source in system suspend, gpio1/3 irq will wakeup both AP and mcu . | - | 606| 2 | important | Fix configuration about ddr. | Fix ddr-unstable problem. | - | 607| 3 | important | Fix problem in system suspend if disable uart. | If loader disable uart, system suspend will panic. | - | 608 609------ 610 611## rk3588_bl32_v1.12.bin 612 613| Date | File | Build commit | Severity | 614| ---------- | :-------------------- | ------------ | --------- | 615| 2022-09-20 | rk3588_bl32_v1.12.bin | 4542e1efd | important | 616 617### New 618 6191. Config FW-DSU region according to the specific DDR channel. 620 621------ 622 623## rk3588_bl32_v1.11.bin 624 625| Date | File | Build commit | Severity | 626| ---------- | :-------------------- | ------------ | --------- | 627| 2022-09-15 | rk3588_bl32_v1.11.bin | d84087907 | important | 628 629### Fixed 630 631| Index | Severity | Update | Issue description | Issue source | 632| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 633| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - | 634 635------ 636 637