1# RK3588 Release Note 2 3## rk3588_bl31_v1.50.elf 4 5| Date | File | Build commit | Severity | 6| ---------- | :-------------------- | ------------ | --------- | 7| 2025-03-13 | rk3588_bl31_v1.50.elf | b23ff75bb | important | 8 9### New 10 111. Add more hardware version support. 12 13------ 14 15## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.19.bin 16 17| Date | File | Build commit | Severity | 18| ---------- | :------------------------------------------- | ------------ | --------- | 19| 2025-03-13 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.19.bin | ff1a08bde6 | important | 20 21### New 22 231. Add RK3588 -B/RK3588S-B/RK3588S2-B support. 24 25 26 27------ 28 29## rk3588_bl31_v1.49.elf 30 31| Date | File | Build commit | Severity | 32| ---------- | :-------------------- | ------------ | --------- | 33| 2025-03-03 | rk3588_bl31_v1.49.elf | 1653f2a08 | important | 34 35### New 36 371. Optimize the uart usage flow during system suspend. 382. Reduce the BL31 firmware size. 39 40------ 41 42## rk3588_bl31_v1.48.elf 43 44| Date | File | Build commit | Severity | 45| ---------- | :-------------------- | ------------ | --------- | 46| 2024-12-19 | rk3588_bl31_v1.48.elf | 040d2de11 | important | 47 48### New 49 501. Support to config the sleep pin for system suspend. 512. Support to resets the hptimer after system suspend. 523. Optimize the hptimer usage flow. 53 54------ 55 56## rk3588_bl32_v1.19.bin 57 58| Date | File | Build commit | Severity | 59| ---------- | :-------------------- | ------------ | --------- | 60| 2024-11-15 | rk3588_bl32_v1.19.bin | 57604957e | important | 61 62### New 63 641. Added support for Dolby library interfaces. 65 66### Fixed 67 68| Index | Severity | Update | Issue description | Issue source | 69| ----- | --------- | -------------------------------------------------------- | ----------------------------------------------------- | ------------ | 70| 1 | important | Support automatic file recovery after abnormal power off | Abnormal power off causes user ta cannot run normally | 517988 | 71 72------ 73 74## rk3588_pcie_v2.20.bin 75 76| Date | File | Build commit | Severity | 77| ---------- | :-------------------- | ----------- | -------- | 78| 2024-11-05 | rk3588_pcie_v2.20.bin | 1f74d1059 | important | 79 80### New 81 821. Support setting pmic rst_fun as 1. 83 84------ 85 86## rk3588_bl32_v1.18.bin 87 88| Date | File | Build commit | Severity | 89| ---------- | :-------------------- | ------------ | --------- | 90| 2024-10-31 | rk3588_bl32_v1.18.bin | 9f2aca7d1 | important | 91 92### Fixed 93 94| Index | Severity | Update | Issue description | Issue source | 95| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 96| 1 | important | check whether the rpmb key has been burned before changing security level | upgrading from weak security level to strong security level may result in rpmb key verification failure | - | 97| 2 | important | fixed RSA OAEP MGF1 algorithm | TA will report an error when using RSA algorithm OAEP MGF1 padding method | - | 98| 3 | important | fixed condition of whether secure boot is enabled | Under unstable hardware conditions, it may be mistakenly believed that secure boot is enabled | - | 99 100------ 101 102## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.18.bin 103 104| Date | File | Build commit | Severity | 105| ---------- | :------------------------------------------- | ------------ | --------- | 106| 2024-09-05 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.18.bin | 9fa84341ce | important | 107 108### Warn 109 1101. BL31 should be update to V1.47 or above. 111 112### New 113 1141. Enable dvfs/periodic training to increase SI margin. 1152. Added support for (x16/x8)mixed packaging particles. 116 117### Fixed 118 119| Index | Severity | Update | Issue description | Issue source | 120| ----- | --------- | --------------------------------------------------------- | ----------------- | ------------ | 121| 1 | important | Modified tTOT configuration to improve DRAM compatibility | - | - | 122 123------ 124 125## rk3588_bl31_v1.47.elf 126 127| Date | File | Build commit | Severity | 128| ---------- | :-------------------- | ------------ | --------- | 129| 2024-09-04 | rk3588_bl31_v1.47.elf | 92b1674a5 | important | 130 131### New 132 1331. Support to respond to interrupts of kernel in OPTEE. 1342. Improve stability of VOP. 1353. Restored status of dvfs/periodic training after system wake up. 136 137------ 138 139## rk3588_bl32_v1.17.bin 140 141| Date | File | Build commit | Severity | 142| ---------- | :-------------------- | ------------ | --------- | 143| 2024-09-02 | rk3588_bl32_v1.17.bin | 6c78a7d8c | important | 144 145### New 146 1471. Support software TA encryption key, customers can use TA encryption function without burning the key. 1482. RPMB change read data to multiple times. 1493. Increase MPI_MEMPOOL_SIZE size. 150 151------ 152 153## rk3588_bl31_v1.46.elf 154 155| Date | File | Build commit | Severity | 156| ---------- | :-------------------- | ------------ | --------- | 157| 2024-04-29 | rk3588_bl31_v1.46.elf | 588059758 | important | 158 159### New 160 1611. Support to config pmu_mcu in kernel. 1622. Improve stability of DFS in single chip lpddr5. 163 164------ 165 166## rk3588_bl32_v1.16.bin 167 168| Date | File | Build commit | Severity | 169| ---------- | :-------------------- | ------------ | --------- | 170| 2024-04-16 | rk3588_bl32_v1.16.bin | 185dc3c92 | important | 171 172### New 173 1741. Optimization parameter check to enhance security. 1752. Support printing TEE memory usage information. 1763. Hardware crypto supports addresses exceeding 4G. 177 178------ 179 180## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin 181 182| Date | File | Build commit | Severity | 183| ---------- | :------------------------------------------- | ------------ | --------- | 184| 2024-04-12 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin | 3488111f83 | important | 185 186### Fixed 187 188| Index | Severity | Update | Issue description | Issue source | 189| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 190| 1 | important | Fixed the error of pll_id setting when boot_fsp!=0，the default value of boot_fsp is 0. | Maybe hang in ddr initialization when boot_fsp is configured to a non-zero value. | - | 191 192------ 193 194## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin 195 196| Date | File | Build commit | Severity | 197| ---------- | :------------------------------------------- | ------------ | --------- | 198| 2024-02-04 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin | 9fffbe1e78 | important | 199 200### New 201 2021. Modify the LPDDR5 frequency to improve stability. 2032. Add support dram with CS0 capacity less than CS1 capacity. 2043. Modify the DERATEINT.mr4_read_interval configuration. 205 206### Fixed 207 208| Index | Severity | Update | Issue description | Issue source | 209| ----- | --------- | ------------------------------------------- | ------------------------------------------------------------ | ------------ | 210| 1 | important | Fixed derate issue with LPDDR5 of one rank. | Maybe hang in kernel when switch the frequency for LPDDR5 of one rank. | - | 211 212------ 213 214## rk3588_bl31_v1.45.elf 215 216| Date | File | Build commit | Severity | 217| ---------- | :-------------------- | ------------ | --------- | 218| 2023-12-27 | rk3588_bl31_v1.45.elf | 4ca8a8422 | important | 219 220### New 221 2221. Optimize the time of DFS atfter system resume. 2232. Cpu switch to hight frequency when systeme resume. 2243. Support config pvtpll parameters by sip. 225 226------ 227 228## rk3588_pcie_v2.10.bin 229 230| Date | File | Build commit | Severity | 231| ---------- | --------------------- | ------------ | -------- | 232| 2023-12-18 | rk3588_pcie_v2.10.bin | 35f57cde3 | moderate | 233 234### New 235 2361. Update the version. 237 238------ 239 240## rk3588_pcie_v2.00.bin 241 242| Date | File | Build commit | Severity | 243| ---------- | --------------------- | ------------ | -------- | 244| 2023-12-06 | rk3588_pcie_v2.00.bin | I3e280b78 | moderate | 245 246### New 247 2481. Fix bar capacity. 249 250------ 251 252## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin 253 254| Date | File | Build commit | Severity | 255| ---------- | :------------------------------------------- | ------------ | --------- | 256| 2023-11-23 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin | d5483af87d | important | 257 258### New 259 2601. Avoid PHY skew value greater than dll lock value，improve the stability for 528MHz. 2612. Fix the data training process，improve the stability. 2623. Resume ZQ background calibration for LPDDR5. 263 264------ 265 266## rk3588_usbplug_v1.11.bin 267 268| Date | File | Build commit | Severity | 269| ---------- | :----------------------- | ------------ | --------- | 270| 2023-11-20 | rk3588_usbplug_v1.11.bin | dcac518e7 | important | 271 272### New 273 2741. Add rk3583 upgrade support. 275 276------ 277 278## rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin 279 280| Date | File | Build commit | Severity | 281| ---------- | :------------------------------------------- | ------------ | --------- | 282| 2023-11-10 | rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin | 73dffea49e | important | 283 284### New 285 2861. Add RK3583 support. 287 288------ 289 290## rk3588_bl31_v1.44.elf 291 292| Date | File | Build commit | Severity | 293| ---------- | :-------------------- | ------------ | --------- | 294| 2023-11-07 | rk3588_bl31_v1.44.elf | 4acbe711b | important | 295 296### New 297 2981. Add pvtpll support rk3583. 2992. Add support to read secure otp. 3003. Optimize the time of dmc restore. 301 302------ 303 304## rk3588_pcie_v1.00.bin 305 306| Date | File | Build commit | Severity | 307| ---------- | --------------------- | ------------ | -------- | 308| 2023-10-07 | rk3588_pcie_v1.00.bin | I01c2c7d7 | moderate | 309 310### New 311 3121. Add bare system executable firmware that supports PCIe EP initialization. 313 314------ 315 316## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin 317 318| Date | File | Build commit | Severity | 319| ---------- | :------------------------------------------- | ------------ | --------- | 320| 2023-09-26 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin | 73dffea49e | important | 321 322### New 323 3241. Improve the stability of LPDDR5. 3252. Add fwver support. 326 327------ 328 329## rk3588_bl32_v1.15.bin 330 331| Date | File | Build commit | Severity | 332| ---------- | :-------------------- | ------------ | --------- | 333| 2023-09-25 | rk3588_bl32_v1.15.bin | 62aa10b7 | important | 334 335### New 336 3371. Support print firmware version, and support transmit firmware version to subsequent firmware. 338 339------ 340 341## rk3588_bl31_v1.43.elf 342 343| Date | File | Build commit | Severity | 344| ---------- | :-------------------- | ------------ | --------- | 345| 2023-09-26 | rk3588_bl31_v1.43.elf | 24b7dd41a | important | 346 347### New 348 3491. Supports to pass bl31 version number through rk atags. 3502. Support to configure wake sources for virtual-poweroff through dts. 351 352------ 353 354## rk3588_spl_v1.13.bin 355 356| Date | File | Build commit | Severity | 357| ---------- | :------------------- | ------------ | --------- | 358| 2023-09-25 | rk3588_spl_v1.13.bin | e4e124926e | important | 359 360### New 361 3621. Print and pass the firmware version number. 363 364### Fixed 365 366| Index | Severity | Update | Issue description | Issue source | 367| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 368| 1 | important | Solve the issue that the backup image is not loaded when the SPL load or check u-boot.dtb fails | When u-boot.dtb of the first uboot.img is corrupted, SPL doesn't load the backup image. | - | 369------ 370 371## rk3588_bl31_v1.42.elf 372 373| Date | File | Build commit | Severity | 374| ---------- | :-------------------- | ------------ | --------- | 375| 2023-09-09 | rk3588_bl31_v1.42.elf | 87bcc5dfe | important | 376 377### New 378 3791. Optimize the time of system resume. 3802. Support any cpu to do system suspend/resume. 3813. Support all pwm int to wakeup when virtual-poweroff. 382 383------ 384 385## rk3588_bl32_v1.14.bin 386 387| Date | File | Build commit | Severity | 388| ---------- | :-------------------- | ------------ | --------- | 389| 2023-08-28 | rk3588_bl32_v1.14.bin | b5340fd65 | important | 390 391### New 392 3931. Pseudo random number seed will be set by default. 3942. Supports read and write security flag interfaces. 3953. Support check ta encryption key is written. 396 397### Fixed 398 399| Index | Severity | Update | Issue description | Issue source | 400| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------- | ------------ | 401| 1 | important | Fixed hardware crypto probability crash issue after enabling dynamic memory | Error will be reported when using hardware crypto | - | 402 403------ 404 405## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin 406 407| Date | File | Build commit | Severity | 408| ---------- | :------------------------------------------- | ------------ | --------- | 409| 2023-08-11 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin | 25cee80c4f | important | 410 411### Warn 412 4131. BL31 should be update to V1.41 or above. 414 415### New 416 4171. Improve the stability of LPDDR5 528MHz. 4182. Update vref_inner for each channel in fsp_param to improve stability. 419 420### Fixed 421 422| Index | Severity | Update | Issue description | Issue source | 423| ----- | --------- | ------------------------------------------------------------ | --------------------------------------------------------- | ------------ | 424| 1 | important | Fixed init fail issue that boot in high temperature environment | Panic in ddrbin when boot in high temperature environment | - | 425 426------ 427 428## rk3588_bl31_v1.41.elf 429 430| Date | File | Build commit | Severity | 431| ---------- | :-------------------- | ------------ | --------- | 432| 2023-08-10 | rk3588_bl31_v1.41.elf | b7c5102a2 | important | 433 434### New 435 4361. Support L3 partition. 4372. Update configuration of ddr vref_inner. 4383. Support to config MCU sleep parameter through DTS. 439 440------ 441 442## rk3588_bl31_v1.40.elf 443 444| Date | File | Build commit | Severity | 445| ---------- | :-------------------- | ------------ | --------- | 446| 2023-07-13 | rk3588_bl31_v1.40.elf | dc1125f48 | important | 447 448### New 449 4501. Add support to reset vop sub mem pd. 451 452------ 453 454## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin 455 456| Date | File | Build commit | Severity | 457| ---------- | :------------------------------------------- | ------------ | --------- | 458| 2023-07-06 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin | 52218f4949 | important | 459 460### New 461 4621. Add support print training result and mr value. 463 464### Fixed 465 466| Index | Severity | Update | Issue description | Issue source | 467| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 468| 1 | important | Fixed init fail issue that max freq between 1066-1600MHz | Panic in ddrbin when max DDR freq between 1066-1600MHz. | - | 469| 2 | important | Fixed the issue painc in ddrbin caused by multiple initialization of DDR | When the first SPL firmware failed to load, reloading the second firmware would result in repeated initialization of the DDR. This caused a panic in ddrbin. | - | 470 471------ 472 473## rk3588_bl31_v1.39.elf 474 475| Date | File | Build commit | Severity | 476| ---------- | :-------------------- | ------------ | --------- | 477| 2023-06-27 | rk3588_bl31_v1.39.elf | 001b4889e | important | 478 479### New 480 4811. Change read size to 128 bytes. 4822. Adjust pvtpll table by otp. 4833. Modify pvtpll table for rk3588j/m. 484 485------ 486 487## rk3588_bl31_v1.38.elf 488 489| Date | File | Build commit | Severity | 490| ---------- | :-------------------- | ------------ | --------- | 491| 2023-05-09 | rk3588_bl31_v1.38.elf | 3389cfdda | important | 492 493### Warn 494 4951. DDR bin should be update to V1.11 or above. 496 497### New 498 4991. Update configuration of ddr lp5 mr. 5002. Improve the stability of hdmirx. 5013. Support ddr spread spectrum mode. 502 503------ 504 505## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin 506 507| Date | File | Build commit | Severity | 508| ---------- | :------------------------------------------- | ------------ | --------- | 509| 2023-05-09 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin | f1474cf52f | important | 510 511### Warn 512 5131. BL31 should be update to V1.38 or above. 514 515### New 516 5171. Added more print info when initialization fails to help locate soldering issues. 5182. Optimizing boot time. 5193. Enable per bank refresh function. 5204. LPDDR5 4 channels use different write vref values to improve stability. 5215. First init LPDDR4x. 5226. LPDDR5 cavref update to 36%. 5237. Add support spread spectrum mode. 524 525------ 526 527## rk3588_bl32_v1.13.bin 528 529| Date | File | Build commit | Severity | 530| ---------- | :-------------------- | ------------ | --------- | 531| 2023-04-19 | rk3588_bl32_v1.13.bin | 7f1ea6d6e | important | 532 533### New 534 5351. OTP supports burst read to accelerate BL32 startup speed. 5362. Kernel support read secure boot flag and public key hash. 5373. Support dynamic shared memory, and the secure and normal world can transfer more larger data. 5384. BL32 supports pstore, and the kernel can view print info of BL32 through pstore node. 539 540------ 541 542## rk3588_bl31_v1.37.elf 543 544| Date | File | Build commit | Severity | 545| ---------- | :-------------------- | ------------ | --------- | 546| 2023-03-08 | rk3588_bl31_v1.37.elf | 9609b9c19 | important | 547 548### New 549 5501. Save/restore u2phy_grf registers when system suspend/resume. 5512. Save/restore more ddr related registers when system suspend/resume. 5523. Compatible with system suspend/resume in QNX. 553 554------ 555 556## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin 557 558| Date | File | Build commit | Severity | 559| ---------- | :------------------------------------------- | ------------ | --------- | 560| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin | 75d050770f | important | 561 562### New 563 5641. Pageclose can be enable/disable by ddrbin_tool. 565 566### Fixed 567 568| Index | Severity | Update | Issue description | Issue source | 569| ----- | --------- | ---------------------------- | ------------------------------------------------------------ | ------------ | 570| 1 | important | fix total 24GB bug | If the DDR total capacity is 24GB, it will be stuck and unable to enter kernel. | - | 571| 2 | important | fix LP4/LP4X stability issue | Some LP4/LP4X board need to update read odt to 40ohm to fix stability issue. Note: BL31 should be update to V1.37. | - | 572| 3 | important | improve LP5 performance | LPDDR5 timing tWTR calculate error lead to slow performance | - | 573 574------ 575 576## rk3588_bl31_v1.36.elf 577 578| Date | File | Build commit | Severity | 579| ---------- | :-------------------- | ------------ | --------- | 580| 2023-01-30 | rk3588_bl31_v1.36.elf | 78ee25fe7 | important | 581 582### New 583 5841. Supports analyze infrared signals of various protocols during system suspend by software, which needs to be used together with mcu. 585 586------ 587 588## rk3588_bl31_v1.35.elf 589 590| Date | File | Build commit | Severity | 591| ---------- | :-------------------- | ------------ | --------- | 592| 2023-01-16 | rk3588_bl31_v1.35.elf | bd7bac37a | important | 593 594### New 595 5961. Improve the stability of hdmirx. 597 598------ 599 600## rk3588_bl31_v1.34.elf 601 602| Date | File | Build commit | Severity | 603| ---------- | :-------------------- | ------------ | --------- | 604| 2023-01-10 | rk3588_bl31_v1.34.elf | e63a16361 | important | 605 606### New 607 6081. Support hptimer to use soft adjust mode. 6092. Support pvtpll to add length. 610 611### Fixed 612 613| Index | Severity | Update | Issue description | Issue source | 614| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ | 615| 1 | important | Avoid pmu mcu to boot accidentally in system suspend. | With pmu mcu's accidental boot, linux kernel's code and data may be overwrite after system resume. | - | 616 617------ 618 619## rk3588_spl_v1.12.bin 620 621| Date | File | Build commit | Severity | 622| ---------- | :-------------------- | ------------ | --------- | 623| 2022-12-26 | rk3588_spl_v1.12.bin | 5f53abfa | important | 624 625### New 626 6271. Support SPL AB. 628 629------ 630 631## rk3588_bl31_v1.33.elf 632 633| Date | File | Build commit | Severity | 634| ---------- | :-------------------- | ------------ | --------- | 635| 2022-12-07 | rk3588_bl31_v1.33.elf | 17b41886e | important | 636 637### New 638 6391. Support rk3588m, rk3588j. 640 641------ 642 643## rk3588_usbplug_v1.10.bin 644 645| Date | File | Build commit | Severity | 646| ---------- | :----------------------- | ------------ | --------- | 647| 2022-11-22 | rk3588_usbplug_v1.10.bin | b0e3c43c2 | important | 648 649### New 650 6511. Improve compatibility. 652 653------ 654 655## rk3588_bl31_v1.32.elf 656 657| Date | File | Build commit | Severity | 658| ---------- | :-------------------- | ------------ | --------- | 659| 2022-11-21 | rk3588_bl31_v1.32.elf | e529a2760 | important | 660 661### New 662 6631. Support bus auto CS. 664 665------ 666 667## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin 668 669| Date | File | Build commit | Severity | 670| ---------- | :------------------------------------------- | ------------ | --------- | 671| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin | a930779e06 | important | 672 673### New 674 6751. Derate/perbank refresh can be enable/disable by ddrbin_tool. 6762. Support pstore function. 6773. Boot FSP configurable by ddrbin_tool. 6784. Enable LPDDR5 DMC function. 6795. Support LPDDR5 byte mode DRAM. 6806. Recycle 256MB memory(overlap with REG space). This function can be disable by ddrbin_tool. 681 682### Fixed 683 684| Index | Severity | Update | Issue description | Issue source | 685| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 686| 1 | important | Fix WRTRN Bug | Fix WRTRN bug when ddr freq between 533MHz - 1066MHz | - | 687| 2 | important | Fix ZQCALIB bug | Increase auto ZQCALIB command period to 470ms | - | 688| 3 | important | Fix 528M bug | 528MHz undo RDTRN, SW*skew should be clean before clean before switch to 528MHz. | - | 689| 4 | important | Improve LPDDR5 stability and performance | Fix some LPDDR5 timing like rd2wr,wr2rd and hash config to improve stability and performance. | - | 690| 5 | important | LP4/LP4x support 32GB cap | LP4/LP4x support 32GB cap | - | 691 692------ 693 694## rk3588_bl31_v1.31.elf 695 696| Date | File | Build commit | Severity | 697| ---------- | :-------------------- | ------------ | --------- | 698| 2022-11-09 | rk3588_bl31_v1.31.elf | 91e396185 | important | 699 700### New 701 7021. Enable RK_ENABLE_A76_L2_FLUSH_TO_L3 function. 7032. Support amp function. 704 705### Fixed 706 707| Index | Severity | Update | Issue description | Issue source | 708| ----- | --------- | ------------------------------------------------------------ | ----------------- | ------------ | 709| 1 | important | Save/restore some performance setting in system suspend/resume | - | - | 710 711------ 712 713## rk3588_bl31_v1.30.elf 714 715| Date | File | Build commit | Severity | 716| ---------- | :-------------------- | ------------ | --------- | 717| 2022-10-12 | rk3588_bl31_v1.30.elf | 1450d21e8 | important | 718 719### New 720 7211. Support pstore. 722 723------ 724 725## rk3588_bl31_v1.29.elf 726 727| Date | File | Build commit | Severity | 728| ---------- | :-------------------- | ----------- | --------- | 729| 2022-09-29 | rk3588_bl31_v1.29.elf | 686b5c48b | important | 730 731### New 732 7331. Add A55 AT speculative patches. 7342. Add LPDDR5 DFS patches, support DFS between rows. 7353. Config FW-DSU region according to the specific DDR channel. 736 737### Fixed 738 739| Index | Severity | Update | Issue description | Issue source | 740| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 741| 1 | important | Fix problem about CEC wakeup. | When waiting for CEC wakeup source in system suspend, gpio1/3 irq will wakeup both AP and mcu . | - | 742| 2 | important | Fix configuration about ddr. | Fix ddr-unstable problem. | - | 743| 3 | important | Fix problem in system suspend if disable uart. | If loader disable uart, system suspend will panic. | - | 744 745------ 746 747## rk3588_bl32_v1.12.bin 748 749| Date | File | Build commit | Severity | 750| ---------- | :-------------------- | ------------ | --------- | 751| 2022-09-20 | rk3588_bl32_v1.12.bin | 4542e1efd | important | 752 753### New 754 7551. Config FW-DSU region according to the specific DDR channel. 756 757------ 758 759## rk3588_bl32_v1.11.bin 760 761| Date | File | Build commit | Severity | 762| ---------- | :-------------------- | ------------ | --------- | 763| 2022-09-15 | rk3588_bl32_v1.11.bin | d84087907 | important | 764 765### Fixed 766 767| Index | Severity | Update | Issue description | Issue source | 768| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 769| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - | 770 771------ 772 773