xref: /rkbin/doc/release/RK3588_EN.md (revision b95a8e92903079e7ddf1ef43e4bac22d73c2d20a)
1# RK3588 Release Note
2
3## rk3588_bl31_v1.34.elf
4
5| Date       | File                  | Build commit | Severity  |
6| ---------- | :-------------------- | ------------ | --------- |
7| 2022-01-10 | rk3588_bl31_v1.34.elf | e63a16361    | important |
8
9### New
10
111. Support hptimer to use soft adjust mode.
122. Support pvtpll to add length.
13
14### Fixed
15
16| Index | Severity  | Update                                                | Issue description                                            | Issue source |
17| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ |
18| 1     | important | Avoid pmu mcu to boot accidentally in system suspend. | With pmu mcu's accidental boot, linux kernel's code and data may be overwrite after system resume. | -            |
19
20------
21
22## rk3588_spl_v1.12.bin
23
24| Date       | File                  | Build commit | Severity  |
25| ---------- | :-------------------- | ------------ | --------- |
26| 2022-12-26 | rk3588_spl_v1.12.bin  | 5f53abfa     | important |
27
28### New
29
301. Support SPL AB.
31
32------
33
34## rk3588_bl31_v1.33.elf
35
36| Date       | File                  | Build commit | Severity  |
37| ---------- | :-------------------- | ------------ | --------- |
38| 2022-12-07 | rk3588_bl31_v1.33.elf | 17b41886e    | important |
39
40### New
41
421. Support rk3588m, rk3588j.
43
44------
45
46## rk3588_usbplug_v1.10.bin
47
48| Date       | File                     | Build commit | Severity  |
49| ---------- | :----------------------- | ------------ | --------- |
50| 2022-11-22 | rk3588_usbplug_v1.10.bin | b0e3c43c2    | important |
51
52### New
53
541. Improve compatibility
55
56------
57## rk3588_bl31_v1.32.elf
58
59| Date       | File                  | Build commit | Severity  |
60| ---------- | :-------------------- | ------------ | --------- |
61| 2022-11-21 | rk3588_bl31_v1.32.elf | e529a2760    | important |
62
63### New
64
651. Support bus auto CS.
66
67------
68
69## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin
70
71| Date       | File                                         | Build commit | Severity  |
72| ---------- | :------------------------------------------- | ------------ | --------- |
73| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin | a930779e06   | important |
74
75### NEW
76
771. Derate/perbank refresh can be enable/disable by ddrbin_tool.
782. Support pstore function.
793. boot FSP configurable by ddrbin_tool.
804. Enable LPDDR5 DMC function.
815. Support LPDDR5 byte mode DRAM.
826. Recycle 256MB memory(overlap with REG space). This function can be disable by ddrbin_tool.
83
84### Fixed
85
86| Index | Severity  | Update                                   | Issue description                                            | Issue source |
87| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ |
88| 1     | important | Fix WRTRN Bug                            | Fix WRTRN bug when ddr freq between 533MHz - 1066MHz         | -            |
89| 2     | important | Fix ZQCALIB bug                          | Increase auto ZQCALIB command period to 470ms                | -            |
90| 3     | important | Fix 528M bug                             | 528MHz undo RDTRN, SW*skew should be clean before clean before switch to 528MHz. | -            |
91| 4     | important | Improve LPDDR5 stability and performance | Fix some LPDDR5 timing like rd2wr,wr2rd and hash config to improve stability and performance. | -            |
92| 5     | important | LP4/LP4x support 32GB cap                | LP4/LP4x support 32GB cap                                    | -            |
93
94------
95
96## rk3588_bl31_v1.31.elf
97
98| Date       | File                  | Build commit | Severity  |
99| ---------- | :-------------------- | ------------ | --------- |
100| 2022-11-09 | rk3588_bl31_v1.31.elf | 91e396185    | important |
101
102### New
103
1041. Enable RK_ENABLE_A76_L2_FLUSH_TO_L3 function.
1052. Support amp function.
106
107### Fixed
108
109| Index | Severity  | Update                                                       | Issue description | Issue source |
110| ----- | --------- | ------------------------------------------------------------ | ----------------- | ------------ |
111| 1     | important | Save/restore some performance setting in system suspend/resume | -                 | -            |
112
113------
114
115## rk3588_bl31_v1.30.elf
116
117| Date       | File                  | Build commit | Severity  |
118| ---------- | :-------------------- | ------------ | --------- |
119| 2022-10-12 | rk3588_bl31_v1.30.elf | 1450d21e8    | important |
120
121### New
122
1231. Support pstore.
124
125------
126
127## rk3588_bl31_v1.29.elf
128
129| 时间       | 文件                  | 编译 commit | 重要程度  |
130| ---------- | :-------------------- | ----------- | --------- |
131| 2022-09-29 | rk3588_bl31_v1.29.elf | 686b5c48b   | important |
132
133### New
134
1351. Add A55 AT speculative patches.
1362. Add LPDDR5 DFS patches, support DFS between rows.
1373. Config FW-DSU region according to the specific DDR channel.
138
139### Fixed
140
141| Index | 重要程度  | 更新说明                                       | 问题现象                                                     | 问题来源 |
142| ----- | --------- | ---------------------------------------------- | ------------------------------------------------------------ | -------- |
143| 1     | important | Fix problem about CEC wakeup.                  | When waiting for CEC wakeup source in system suspend, gpio1/3 irq will wakeup both AP and mcu . | -        |
144| 2     | important | Fix configuration about ddr.                   | Fix ddr-unstable problem.                                    | -        |
145| 3     | important | Fix problem in system suspend if disable uart. | If loader disable uart, system suspend will panic.           | -        |
146
147------
148
149## rk3588_bl32_v1.12.bin
150
151| Date       | File                  | Build commit | Severity  |
152| ---------- | :-------------------- | ------------ | --------- |
153| 2022-09-20 | rk3588_bl32_v1.12.bin | 4542e1efd    | important |
154
155### New
156
1571. Config FW-DSU region according to the specific DDR channel.
158
159------
160
161## rk3588_bl32_v1.11.bin
162
163| Date       | File                  | Build commit | Severity  |
164| ---------- | :-------------------- | ------------ | --------- |
165| 2022-09-15 | rk3588_bl32_v1.11.bin | d84087907    | important |
166
167### Fixed
168
169| Index | Severity  | Update                                                       | Issue description                                            | Issue source |
170| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ |
171| 1     | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing ,  then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | -            |
172
173------
174
175