1# RK3588 Release Note 2 3## rk3588_bl31_v1.47.elf 4 5| Date | File | Build commit | Severity | 6| ---------- | :-------------------- | ------------ | --------- | 7| 2024-09-04 | rk3588_bl31_v1.47.elf | 92b1674a5 | important | 8 9### New 10 111. Support to respond to interrupts of kernel in OPTEE. 122. Improve stability of VOP. 133. Restored status of dvfs/periodic training after system wake up. 14 15------ 16 17## rk3588_bl32_v1.17.bin 18 19| Date | File | Build commit | Severity | 20| ---------- | :-------------------- | ------------ | --------- | 21| 2024-09-02 | rk3588_bl32_v1.17.bin | 6c78a7d8c | important | 22 23### New 24 251. Support software TA encryption key, customers can use TA encryption function without burning the key. 262. RPMB change read data to multiple times. 273. Increase MPI_MEMPOOL_SIZE size. 28 29------ 30 31## rk3588_bl31_v1.46.elf 32 33| Date | File | Build commit | Severity | 34| ---------- | :-------------------- | ------------ | --------- | 35| 2024-04-29 | rk3588_bl31_v1.46.elf | 588059758 | important | 36 37### New 38 391. Support to config pmu_mcu in kernel. 402. Improve stability of DFS in single chip lpddr5. 41 42------ 43 44## rk3588_bl32_v1.16.bin 45 46| Date | File | Build commit | Severity | 47| ---------- | :-------------------- | ------------ | --------- | 48| 2024-04-16 | rk3588_bl32_v1.16.bin | 185dc3c92 | important | 49 50### New 51 521. Optimization parameter check to enhance security. 532. Support printing TEE memory usage information. 543. Hardware crypto supports addresses exceeding 4G. 55 56------ 57 58## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin 59 60| Date | File | Build commit | Severity | 61| ---------- | :------------------------------------------- | ------------ | --------- | 62| 2024-04-12 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin | 3488111f83 | important | 63 64### Fixed 65 66| Index | Severity | Update | Issue description | Issue source | 67| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 68| 1 | important | Fixed the error of pll_id setting when boot_fsp!=0，the default value of boot_fsp is 0. | Maybe hang in ddr initialization when boot_fsp is configured to a non-zero value. | - | 69 70------ 71 72## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin 73 74| Date | File | Build commit | Severity | 75| ---------- | :------------------------------------------- | ------------ | --------- | 76| 2024-02-04 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin | 9fffbe1e78 | important | 77 78### New 79 801. Modify the LPDDR5 frequency to improve stability. 812. Add support dram with CS0 capacity less than CS1 capacity. 823. Modify the DERATEINT.mr4_read_interval configuration. 83 84### Fixed 85 86| Index | Severity | Update | Issue description | Issue source | 87| ----- | --------- | ------------------------------------------- | ------------------------------------------------------------ | ------------ | 88| 1 | important | Fixed derate issue with LPDDR5 of one rank. | Maybe hang in kernel when switch the frequency for LPDDR5 of one rank. | - | 89 90------ 91 92## rk3588_bl31_v1.45.elf 93 94| Date | File | Build commit | Severity | 95| ---------- | :-------------------- | ------------ | --------- | 96| 2023-12-27 | rk3588_bl31_v1.45.elf | 4ca8a8422 | important | 97 98### New 99 1001. Optimize the time of DFS atfter system resume. 1012. Cpu switch to hight frequency when systeme resume. 1023. Support config pvtpll parameters by sip. 103 104------ 105 106## rk3588_pcie_v2.10.bin 107 108| Date | File | Build commit | Severity | 109| ---------- | --------------------- | ------------ | -------- | 110| 2023-12-18 | rk3588_pcie_v2.10.bin | 35f57cde3 | moderate | 111 112### New 113 1141. Update the version. 115 116------ 117 118## rk3588_pcie_v2.00.bin 119 120| Date | File | Build commit | Severity | 121| ---------- | --------------------- | ------------ | -------- | 122| 2023-12-06 | rk3588_pcie_v2.00.bin | I3e280b78 | moderate | 123 124### New 125 1261. Fix bar capacity. 127 128------ 129 130## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin 131 132| Date | File | Build commit | Severity | 133| ---------- | :------------------------------------------- | ------------ | --------- | 134| 2023-11-23 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin | d5483af87d | important | 135 136### New 137 1381. Avoid PHY skew value greater than dll lock value，improve the stability for 528MHz. 1392. Fix the data training process，improve the stability. 1403. Resume ZQ background calibration for LPDDR5. 141 142------ 143 144## rk3588_usbplug_v1.11.bin 145 146| Date | File | Build commit | Severity | 147| ---------- | :----------------------- | ------------ | --------- | 148| 2023-11-20 | rk3588_usbplug_v1.11.bin | dcac518e7 | important | 149 150### New 151 1521. Add rk3583 upgrade support. 153 154------ 155 156## rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin 157 158| Date | File | Build commit | Severity | 159| ---------- | :------------------------------------------- | ------------ | --------- | 160| 2023-11-10 | rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin | 73dffea49e | important | 161 162### New 163 1641. Add RK3583 support. 165 166------ 167 168## rk3588_bl31_v1.44.elf 169 170| Date | File | Build commit | Severity | 171| ---------- | :-------------------- | ------------ | --------- | 172| 2023-11-07 | rk3588_bl31_v1.44.elf | 4acbe711b | important | 173 174### New 175 1761. Add pvtpll support rk3583. 1772. Add support to read secure otp. 1783. Optimize the time of dmc restore. 179 180------ 181 182## rk3588_pcie_v1.00.bin 183 184| Date | File | Build commit | Severity | 185| ---------- | --------------------- | ------------ | -------- | 186| 2023-10-07 | rk3588_pcie_v1.00.bin | I01c2c7d7 | moderate | 187 188### New 189 1901. Add bare system executable firmware that supports PCIe EP initialization. 191 192------ 193 194## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin 195 196| Date | File | Build commit | Severity | 197| ---------- | :------------------------------------------- | ------------ | --------- | 198| 2023-09-26 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin | 73dffea49e | important | 199 200### New 201 2021. Improve the stability of LPDDR5. 2032. Add fwver support. 204 205------ 206 207## rk3588_bl32_v1.15.bin 208 209| Date | File | Build commit | Severity | 210| ---------- | :-------------------- | ------------ | --------- | 211| 2023-09-25 | rk3588_bl32_v1.15.bin | 62aa10b7 | important | 212 213### New 214 2151. Support print firmware version, and support transmit firmware version to subsequent firmware. 216 217------ 218 219## rk3588_bl31_v1.43.elf 220 221| Date | File | Build commit | Severity | 222| ---------- | :-------------------- | ------------ | --------- | 223| 2023-09-26 | rk3588_bl31_v1.43.elf | 24b7dd41a | important | 224 225### New 226 2271. Supports to pass bl31 version number through rk atags. 2282. Support to configure wake sources for virtual-poweroff through dts. 229 230------ 231 232## rk3588_spl_v1.13.bin 233 234| Date | File | Build commit | Severity | 235| ---------- | :------------------- | ------------ | --------- | 236| 2023-09-25 | rk3588_spl_v1.13.bin | e4e124926e | important | 237 238### New 239 2401. Print and pass the firmware version number. 241 242### Fixed 243 244| Index | Severity | Update | Issue description | Issue source | 245| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 246| 1 | important | Solve the issue that the backup image is not loaded when the SPL load or check u-boot.dtb fails | When u-boot.dtb of the first uboot.img is corrupted, SPL doesn't load the backup image. | - | 247------ 248 249## rk3588_bl31_v1.42.elf 250 251| Date | File | Build commit | Severity | 252| ---------- | :-------------------- | ------------ | --------- | 253| 2023-09-09 | rk3588_bl31_v1.42.elf | 87bcc5dfe | important | 254 255### New 256 2571. Optimize the time of system resume. 2582. Support any cpu to do system suspend/resume. 2593. Support all pwm int to wakeup when virtual-poweroff. 260 261------ 262 263## rk3588_bl32_v1.14.bin 264 265| Date | File | Build commit | Severity | 266| ---------- | :-------------------- | ------------ | --------- | 267| 2023-08-28 | rk3588_bl32_v1.14.bin | b5340fd65 | important | 268 269### New 270 2711. Pseudo random number seed will be set by default. 2722. Supports read and write security flag interfaces. 2733. Support check ta encryption key is written. 274 275### Fixed 276 277| Index | Severity | Update | Issue description | Issue source | 278| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------- | ------------ | 279| 1 | important | Fixed hardware crypto probability crash issue after enabling dynamic memory | Error will be reported when using hardware crypto | - | 280 281------ 282 283## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin 284 285| Date | File | Build commit | Severity | 286| ---------- | :------------------------------------------- | ------------ | --------- | 287| 2023-08-11 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin | 25cee80c4f | important | 288 289### Warn 290 2911. BL31 should be update to V1.41 or above. 292 293### New 294 2951. Improve the stability of LPDDR5 528MHz. 2962. Update vref_inner for each channel in fsp_param to improve stability. 297 298### Fixed 299 300| Index | Severity | Update | Issue description | Issue source | 301| ----- | --------- | ------------------------------------------------------------ | --------------------------------------------------------- | ------------ | 302| 1 | important | Fixed init fail issue that boot in high temperature environment | Panic in ddrbin when boot in high temperature environment | - | 303 304------ 305 306## rk3588_bl31_v1.41.elf 307 308| Date | File | Build commit | Severity | 309| ---------- | :-------------------- | ------------ | --------- | 310| 2023-08-10 | rk3588_bl31_v1.41.elf | b7c5102a2 | important | 311 312### New 313 3141. Support L3 partition. 3152. Update configuration of ddr vref_inner. 3163. Support to config MCU sleep parameter through DTS. 317 318------ 319 320## rk3588_bl31_v1.40.elf 321 322| Date | File | Build commit | Severity | 323| ---------- | :-------------------- | ------------ | --------- | 324| 2023-07-13 | rk3588_bl31_v1.40.elf | dc1125f48 | important | 325 326### New 327 3281. Add support to reset vop sub mem pd. 329 330------ 331 332## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin 333 334| Date | File | Build commit | Severity | 335| ---------- | :------------------------------------------- | ------------ | --------- | 336| 2023-07-06 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin | 52218f4949 | important | 337 338### New 339 3401. Add support print training result and mr value. 341 342### Fixed 343 344| Index | Severity | Update | Issue description | Issue source | 345| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 346| 1 | important | Fixed init fail issue that max freq between 1066-1600MHz | Panic in ddrbin when max DDR freq between 1066-1600MHz. | - | 347| 2 | important | Fixed the issue painc in ddrbin caused by multiple initialization of DDR | When the first SPL firmware failed to load, reloading the second firmware would result in repeated initialization of the DDR. This caused a panic in ddrbin. | - | 348 349------ 350 351## rk3588_bl31_v1.39.elf 352 353| Date | File | Build commit | Severity | 354| ---------- | :-------------------- | ------------ | --------- | 355| 2023-06-27 | rk3588_bl31_v1.39.elf | 001b4889e | important | 356 357### New 358 3591. Change read size to 128 bytes. 3602. Adjust pvtpll table by otp. 3613. Modify pvtpll table for rk3588j/m. 362 363------ 364 365## rk3588_bl31_v1.38.elf 366 367| Date | File | Build commit | Severity | 368| ---------- | :-------------------- | ------------ | --------- | 369| 2023-05-09 | rk3588_bl31_v1.38.elf | 3389cfdda | important | 370 371### Warn 372 3731. DDR bin should be update to V1.11 or above. 374 375### New 376 3771. Update configuration of ddr lp5 mr. 3782. Improve the stability of hdmirx. 3793. Support ddr spread spectrum mode. 380 381------ 382 383## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin 384 385| Date | File | Build commit | Severity | 386| ---------- | :------------------------------------------- | ------------ | --------- | 387| 2023-05-09 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin | f1474cf52f | important | 388 389### Warn 390 3911. BL31 should be update to V1.38 or above. 392 393### New 394 3951. Added more print info when initialization fails to help locate soldering issues. 3962. Optimizing boot time. 3973. Enable per bank refresh function. 3984. LPDDR5 4 channels use different write vref values to improve stability. 3995. First init LPDDR4x. 4006. LPDDR5 cavref update to 36%. 4017. Add support spread spectrum mode. 402 403------ 404 405## rk3588_bl32_v1.13.bin 406 407| Date | File | Build commit | Severity | 408| ---------- | :-------------------- | ------------ | --------- | 409| 2023-04-19 | rk3588_bl32_v1.13.bin | 7f1ea6d6e | important | 410 411### New 412 4131. OTP supports burst read to accelerate BL32 startup speed. 4142. Kernel support read secure boot flag and public key hash. 4153. Support dynamic shared memory, and the secure and normal world can transfer more larger data. 4164. BL32 supports pstore, and the kernel can view print info of BL32 through pstore node. 417 418------ 419 420## rk3588_bl31_v1.37.elf 421 422| Date | File | Build commit | Severity | 423| ---------- | :-------------------- | ------------ | --------- | 424| 2023-03-08 | rk3588_bl31_v1.37.elf | 9609b9c19 | important | 425 426### New 427 4281. Save/restore u2phy_grf registers when system suspend/resume. 4292. Save/restore more ddr related registers when system suspend/resume. 4303. Compatible with system suspend/resume in QNX. 431 432------ 433 434## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin 435 436| Date | File | Build commit | Severity | 437| ---------- | :------------------------------------------- | ------------ | --------- | 438| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin | 75d050770f | important | 439 440### New 441 4421. Pageclose can be enable/disable by ddrbin_tool. 443 444### Fixed 445 446| Index | Severity | Update | Issue description | Issue source | 447| ----- | --------- | ---------------------------- | ------------------------------------------------------------ | ------------ | 448| 1 | important | fix total 24GB bug | If the DDR total capacity is 24GB, it will be stuck and unable to enter kernel. | - | 449| 2 | important | fix LP4/LP4X stability issue | Some LP4/LP4X board need to update read odt to 40ohm to fix stability issue. Note: BL31 should be update to V1.37. | - | 450| 3 | important | improve LP5 performance | LPDDR5 timing tWTR calculate error lead to slow performance | - | 451 452------ 453 454## rk3588_bl31_v1.36.elf 455 456| Date | File | Build commit | Severity | 457| ---------- | :-------------------- | ------------ | --------- | 458| 2023-01-30 | rk3588_bl31_v1.36.elf | 78ee25fe7 | important | 459 460### New 461 4621. Supports analyze infrared signals of various protocols during system suspend by software, which needs to be used together with mcu. 463 464------ 465 466## rk3588_bl31_v1.35.elf 467 468| Date | File | Build commit | Severity | 469| ---------- | :-------------------- | ------------ | --------- | 470| 2023-01-16 | rk3588_bl31_v1.35.elf | bd7bac37a | important | 471 472### New 473 4741. Improve the stability of hdmirx. 475 476------ 477 478## rk3588_bl31_v1.34.elf 479 480| Date | File | Build commit | Severity | 481| ---------- | :-------------------- | ------------ | --------- | 482| 2023-01-10 | rk3588_bl31_v1.34.elf | e63a16361 | important | 483 484### New 485 4861. Support hptimer to use soft adjust mode. 4872. Support pvtpll to add length. 488 489### Fixed 490 491| Index | Severity | Update | Issue description | Issue source | 492| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ | 493| 1 | important | Avoid pmu mcu to boot accidentally in system suspend. | With pmu mcu's accidental boot, linux kernel's code and data may be overwrite after system resume. | - | 494 495------ 496 497## rk3588_spl_v1.12.bin 498 499| Date | File | Build commit | Severity | 500| ---------- | :-------------------- | ------------ | --------- | 501| 2022-12-26 | rk3588_spl_v1.12.bin | 5f53abfa | important | 502 503### New 504 5051. Support SPL AB. 506 507------ 508 509## rk3588_bl31_v1.33.elf 510 511| Date | File | Build commit | Severity | 512| ---------- | :-------------------- | ------------ | --------- | 513| 2022-12-07 | rk3588_bl31_v1.33.elf | 17b41886e | important | 514 515### New 516 5171. Support rk3588m, rk3588j. 518 519------ 520 521## rk3588_usbplug_v1.10.bin 522 523| Date | File | Build commit | Severity | 524| ---------- | :----------------------- | ------------ | --------- | 525| 2022-11-22 | rk3588_usbplug_v1.10.bin | b0e3c43c2 | important | 526 527### New 528 5291. Improve compatibility. 530 531------ 532 533## rk3588_bl31_v1.32.elf 534 535| Date | File | Build commit | Severity | 536| ---------- | :-------------------- | ------------ | --------- | 537| 2022-11-21 | rk3588_bl31_v1.32.elf | e529a2760 | important | 538 539### New 540 5411. Support bus auto CS. 542 543------ 544 545## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin 546 547| Date | File | Build commit | Severity | 548| ---------- | :------------------------------------------- | ------------ | --------- | 549| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin | a930779e06 | important | 550 551### New 552 5531. Derate/perbank refresh can be enable/disable by ddrbin_tool. 5542. Support pstore function. 5553. Boot FSP configurable by ddrbin_tool. 5564. Enable LPDDR5 DMC function. 5575. Support LPDDR5 byte mode DRAM. 5586. Recycle 256MB memory(overlap with REG space). This function can be disable by ddrbin_tool. 559 560### Fixed 561 562| Index | Severity | Update | Issue description | Issue source | 563| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 564| 1 | important | Fix WRTRN Bug | Fix WRTRN bug when ddr freq between 533MHz - 1066MHz | - | 565| 2 | important | Fix ZQCALIB bug | Increase auto ZQCALIB command period to 470ms | - | 566| 3 | important | Fix 528M bug | 528MHz undo RDTRN, SW*skew should be clean before clean before switch to 528MHz. | - | 567| 4 | important | Improve LPDDR5 stability and performance | Fix some LPDDR5 timing like rd2wr,wr2rd and hash config to improve stability and performance. | - | 568| 5 | important | LP4/LP4x support 32GB cap | LP4/LP4x support 32GB cap | - | 569 570------ 571 572## rk3588_bl31_v1.31.elf 573 574| Date | File | Build commit | Severity | 575| ---------- | :-------------------- | ------------ | --------- | 576| 2022-11-09 | rk3588_bl31_v1.31.elf | 91e396185 | important | 577 578### New 579 5801. Enable RK_ENABLE_A76_L2_FLUSH_TO_L3 function. 5812. Support amp function. 582 583### Fixed 584 585| Index | Severity | Update | Issue description | Issue source | 586| ----- | --------- | ------------------------------------------------------------ | ----------------- | ------------ | 587| 1 | important | Save/restore some performance setting in system suspend/resume | - | - | 588 589------ 590 591## rk3588_bl31_v1.30.elf 592 593| Date | File | Build commit | Severity | 594| ---------- | :-------------------- | ------------ | --------- | 595| 2022-10-12 | rk3588_bl31_v1.30.elf | 1450d21e8 | important | 596 597### New 598 5991. Support pstore. 600 601------ 602 603## rk3588_bl31_v1.29.elf 604 605| Date | File | Build commit | Severity | 606| ---------- | :-------------------- | ----------- | --------- | 607| 2022-09-29 | rk3588_bl31_v1.29.elf | 686b5c48b | important | 608 609### New 610 6111. Add A55 AT speculative patches. 6122. Add LPDDR5 DFS patches, support DFS between rows. 6133. Config FW-DSU region according to the specific DDR channel. 614 615### Fixed 616 617| Index | Severity | Update | Issue description | Issue source | 618| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 619| 1 | important | Fix problem about CEC wakeup. | When waiting for CEC wakeup source in system suspend, gpio1/3 irq will wakeup both AP and mcu . | - | 620| 2 | important | Fix configuration about ddr. | Fix ddr-unstable problem. | - | 621| 3 | important | Fix problem in system suspend if disable uart. | If loader disable uart, system suspend will panic. | - | 622 623------ 624 625## rk3588_bl32_v1.12.bin 626 627| Date | File | Build commit | Severity | 628| ---------- | :-------------------- | ------------ | --------- | 629| 2022-09-20 | rk3588_bl32_v1.12.bin | 4542e1efd | important | 630 631### New 632 6331. Config FW-DSU region according to the specific DDR channel. 634 635------ 636 637## rk3588_bl32_v1.11.bin 638 639| Date | File | Build commit | Severity | 640| ---------- | :-------------------- | ------------ | --------- | 641| 2022-09-15 | rk3588_bl32_v1.11.bin | d84087907 | important | 642 643### Fixed 644 645| Index | Severity | Update | Issue description | Issue source | 646| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 647| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - | 648 649------ 650 651