1# RK3588 Release Note 2 3## rk3588_bl32_v1.16.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :-------------------- | ------------ | --------- | 7| 2024-04-16 | rk3588_bl32_v1.16.bin | 185dc3c92 | important | 8 9### New 10 111. Optimization parameter check to enhance security. 122. Support printing TEE memory usage information. 133. Hardware crypto supports addresses exceeding 4G. 14 15------ 16 17## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin 18 19| Date | File | Build commit | Severity | 20| ---------- | :------------------------------------------- | ------------ | --------- | 21| 2024-04-12 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin | 3488111f83 | important | 22 23### Fixed 24 25| Index | Severity | Update | Issue description | Issue source | 26| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 27| 1 | important | Fixed the error of pll_id setting when boot_fsp!=0，the default value of boot_fsp is 0. | Maybe hang in ddr initialization when boot_fsp is configured to a non-zero value. | - | 28 29------ 30 31## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin 32 33| Date | File | Build commit | Severity | 34| ---------- | :------------------------------------------- | ------------ | --------- | 35| 2024-02-04 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin | 9fffbe1e78 | important | 36 37### New 38 391. Modify the LPDDR5 frequency to improve stability. 402. Add support dram with CS0 capacity less than CS1 capacity. 413. Modify the DERATEINT.mr4_read_interval configuration. 42 43### Fixed 44 45| Index | Severity | Update | Issue description | Issue source | 46| ----- | --------- | ------------------------------------------- | ------------------------------------------------------------ | ------------ | 47| 1 | important | Fixed derate issue with LPDDR5 of one rank. | Maybe hang in kernel when switch the frequency for LPDDR5 of one rank. | - | 48 49------ 50 51## rk3588_bl31_v1.45.elf 52 53| Date | File | Build commit | Severity | 54| ---------- | :-------------------- | ------------ | --------- | 55| 2023-12-27 | rk3588_bl31_v1.45.elf | 4ca8a8422 | important | 56 57### New 58 591. Optimize the time of DFS atfter system resume. 602. Cpu switch to hight frequency when systeme resume. 613. Support config pvtpll parameters by sip. 62 63------ 64 65## rk3588_pcie_v2.10.bin 66 67| Date | File | Build commit | Severity | 68| ---------- | --------------------- | ------------ | -------- | 69| 2023-12-18 | rk3588_pcie_v2.10.bin | 35f57cde3 | moderate | 70 71### New 72 731. Update the version. 74 75------ 76 77## rk3588_pcie_v2.00.bin 78 79| Date | File | Build commit | Severity | 80| ---------- | --------------------- | ------------ | -------- | 81| 2023-12-06 | rk3588_pcie_v2.00.bin | I3e280b78 | moderate | 82 83### New 84 851. Fix bar capacity. 86 87------ 88 89## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin 90 91| Date | File | Build commit | Severity | 92| ---------- | :------------------------------------------- | ------------ | --------- | 93| 2023-11-23 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin | d5483af87d | important | 94 95### New 96 971. Avoid PHY skew value greater than dll lock value，improve the stability for 528MHz. 982. Fix the data training process，improve the stability. 993. Resume ZQ background calibration for LPDDR5. 100 101------ 102 103## rk3588_usbplug_v1.11.bin 104 105| Date | File | Build commit | Severity | 106| ---------- | :----------------------- | ------------ | --------- | 107| 2023-11-20 | rk3588_usbplug_v1.11.bin | dcac518e7 | important | 108 109### New 110 1111. Add rk3583 upgrade support. 112 113------ 114 115## rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin 116 117| Date | File | Build commit | Severity | 118| ---------- | :------------------------------------------- | ------------ | --------- | 119| 2023-11-10 | rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin | 73dffea49e | important | 120 121### New 122 1231. Add RK3583 support. 124 125------ 126 127## rk3588_bl31_v1.44.elf 128 129| Date | File | Build commit | Severity | 130| ---------- | :-------------------- | ------------ | --------- | 131| 2023-11-07 | rk3588_bl31_v1.44.elf | 4acbe711b | important | 132 133### New 134 1351. Add pvtpll support rk3583. 1362. Add support to read secure otp. 1373. Optimize the time of dmc restore. 138 139------ 140 141## rk3588_pcie_v1.00.bin 142 143| Date | File | Build commit | Severity | 144| ---------- | --------------------- | ------------ | -------- | 145| 2023-10-07 | rk3588_pcie_v1.00.bin | I01c2c7d7 | moderate | 146 147### New 148 1491. Add bare system executable firmware that supports PCIe EP initialization. 150 151------ 152 153## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin 154 155| Date | File | Build commit | Severity | 156| ---------- | :------------------------------------------- | ------------ | --------- | 157| 2023-09-26 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin | 73dffea49e | important | 158 159### New 160 1611. Improve the stability of LPDDR5. 1622. Add fwver support. 163 164------ 165 166## rk3588_bl32_v1.15.bin 167 168| Date | File | Build commit | Severity | 169| ---------- | :-------------------- | ------------ | --------- | 170| 2023-09-25 | rk3588_bl32_v1.15.bin | 62aa10b7 | important | 171 172### New 173 1741. Support print firmware version, and support transmit firmware version to subsequent firmware. 175 176------ 177 178## rk3588_bl31_v1.43.elf 179 180| Date | File | Build commit | Severity | 181| ---------- | :-------------------- | ------------ | --------- | 182| 2023-09-26 | rk3588_bl31_v1.43.elf | 24b7dd41a | important | 183 184### New 185 1861. Supports to pass bl31 version number through rk atags. 1872. Support to configure wake sources for virtual-poweroff through dts. 188 189------ 190 191## rk3588_spl_v1.13.bin 192 193| Date | File | Build commit | Severity | 194| ---------- | :------------------- | ------------ | --------- | 195| 2023-09-25 | rk3588_spl_v1.13.bin | e4e124926e | important | 196 197### New 198 1991. Print and pass the firmware version number. 200 201### Fixed 202 203| Index | Severity | Update | Issue description | Issue source | 204| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 205| 1 | important | Solve the issue that the backup image is not loaded when the SPL load or check u-boot.dtb fails | When u-boot.dtb of the first uboot.img is corrupted, SPL doesn't load the backup image. | - | 206------ 207 208## rk3588_bl31_v1.42.elf 209 210| Date | File | Build commit | Severity | 211| ---------- | :-------------------- | ------------ | --------- | 212| 2023-09-09 | rk3588_bl31_v1.42.elf | 87bcc5dfe | important | 213 214### New 215 2161. Optimize the time of system resume. 2172. Support any cpu to do system suspend/resume. 2183. Support all pwm int to wakeup when virtual-poweroff. 219 220------ 221 222## rk3588_bl32_v1.14.bin 223 224| Date | File | Build commit | Severity | 225| ---------- | :-------------------- | ------------ | --------- | 226| 2023-08-28 | rk3588_bl32_v1.14.bin | b5340fd65 | important | 227 228### New 229 2301. Pseudo random number seed will be set by default. 2312. Supports read and write security flag interfaces. 2323. Support check ta encryption key is written. 233 234### Fixed 235 236| Index | Severity | Update | Issue description | Issue source | 237| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------- | ------------ | 238| 1 | important | Fixed hardware crypto probability crash issue after enabling dynamic memory | Error will be reported when using hardware crypto | - | 239 240------ 241 242## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin 243 244| Date | File | Build commit | Severity | 245| ---------- | :------------------------------------------- | ------------ | --------- | 246| 2023-08-11 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin | 25cee80c4f | important | 247 248### Warn 249 2501. BL31 should be update to V1.41 or above. 251 252### New 253 2541. Improve the stability of LPDDR5 528MHz. 2552. Update vref_inner for each channel in fsp_param to improve stability. 256 257### Fixed 258 259| Index | Severity | Update | Issue description | Issue source | 260| ----- | --------- | ------------------------------------------------------------ | --------------------------------------------------------- | ------------ | 261| 1 | important | Fixed init fail issue that boot in high temperature environment | Panic in ddrbin when boot in high temperature environment | - | 262 263------ 264 265## rk3588_bl31_v1.41.elf 266 267| Date | File | Build commit | Severity | 268| ---------- | :-------------------- | ------------ | --------- | 269| 2023-08-10 | rk3588_bl31_v1.41.elf | b7c5102a2 | important | 270 271### New 272 2731. Support L3 partition. 2742. Update configuration of ddr vref_inner. 2753. Support to config MCU sleep parameter through DTS. 276 277------ 278 279## rk3588_bl31_v1.40.elf 280 281| Date | File | Build commit | Severity | 282| ---------- | :-------------------- | ------------ | --------- | 283| 2023-07-13 | rk3588_bl31_v1.40.elf | dc1125f48 | important | 284 285### New 286 2871. Add support to reset vop sub mem pd. 288 289------ 290 291## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin 292 293| Date | File | Build commit | Severity | 294| ---------- | :------------------------------------------- | ------------ | --------- | 295| 2023-07-06 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin | 52218f4949 | important | 296 297### New 298 2991. Add support print training result and mr value. 300 301### Fixed 302 303| Index | Severity | Update | Issue description | Issue source | 304| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 305| 1 | important | Fixed init fail issue that max freq between 1066-1600MHz | Panic in ddrbin when max DDR freq between 1066-1600MHz. | - | 306| 2 | important | Fixed the issue painc in ddrbin caused by multiple initialization of DDR | When the first SPL firmware failed to load, reloading the second firmware would result in repeated initialization of the DDR. This caused a panic in ddrbin. | - | 307 308------ 309 310## rk3588_bl31_v1.39.elf 311 312| Date | File | Build commit | Severity | 313| ---------- | :-------------------- | ------------ | --------- | 314| 2023-06-27 | rk3588_bl31_v1.39.elf | 001b4889e | important | 315 316### New 317 3181. Change read size to 128 bytes. 3192. Adjust pvtpll table by otp. 3203. Modify pvtpll table for rk3588j/m. 321 322------ 323 324## rk3588_bl31_v1.38.elf 325 326| Date | File | Build commit | Severity | 327| ---------- | :-------------------- | ------------ | --------- | 328| 2023-05-09 | rk3588_bl31_v1.38.elf | 3389cfdda | important | 329 330### Warn 331 3321. DDR bin should be update to V1.11 or above. 333 334### New 335 3361. Update configuration of ddr lp5 mr. 3372. Improve the stability of hdmirx. 3383. Support ddr spread spectrum mode. 339 340------ 341 342## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin 343 344| Date | File | Build commit | Severity | 345| ---------- | :------------------------------------------- | ------------ | --------- | 346| 2023-05-09 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin | f1474cf52f | important | 347 348### Warn 349 3501. BL31 should be update to V1.38 or above. 351 352### New 353 3541. Added more print info when initialization fails to help locate soldering issues. 3552. Optimizing boot time. 3563. Enable per bank refresh function. 3574. LPDDR5 4 channels use different write vref values to improve stability. 3585. First init LPDDR4x. 3596. LPDDR5 cavref update to 36%. 3607. Add support spread spectrum mode. 361 362------ 363 364## rk3588_bl32_v1.13.bin 365 366| Date | File | Build commit | Severity | 367| ---------- | :-------------------- | ------------ | --------- | 368| 2023-04-19 | rk3588_bl32_v1.13.bin | 7f1ea6d6e | important | 369 370### New 371 3721. OTP supports burst read to accelerate BL32 startup speed. 3732. Kernel support read secure boot flag and public key hash. 3743. Support dynamic shared memory, and the secure and normal world can transfer more larger data. 3754. BL32 supports pstore, and the kernel can view print info of BL32 through pstore node. 376 377------ 378 379## rk3588_bl31_v1.37.elf 380 381| Date | File | Build commit | Severity | 382| ---------- | :-------------------- | ------------ | --------- | 383| 2023-03-08 | rk3588_bl31_v1.37.elf | 9609b9c19 | important | 384 385### New 386 3871. Save/restore u2phy_grf registers when system suspend/resume. 3882. Save/restore more ddr related registers when system suspend/resume. 3893. Compatible with system suspend/resume in QNX. 390 391------ 392 393## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin 394 395| Date | File | Build commit | Severity | 396| ---------- | :------------------------------------------- | ------------ | --------- | 397| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin | 75d050770f | important | 398 399### New 400 4011. Pageclose can be enable/disable by ddrbin_tool. 402 403### Fixed 404 405| Index | Severity | Update | Issue description | Issue source | 406| ----- | --------- | ---------------------------- | ------------------------------------------------------------ | ------------ | 407| 1 | important | fix total 24GB bug | If the DDR total capacity is 24GB, it will be stuck and unable to enter kernel. | - | 408| 2 | important | fix LP4/LP4X stability issue | Some LP4/LP4X board need to update read odt to 40ohm to fix stability issue. Note: BL31 should be update to V1.37. | - | 409| 3 | important | improve LP5 performance | LPDDR5 timing tWTR calculate error lead to slow performance | - | 410 411------ 412 413## rk3588_bl31_v1.36.elf 414 415| Date | File | Build commit | Severity | 416| ---------- | :-------------------- | ------------ | --------- | 417| 2023-01-30 | rk3588_bl31_v1.36.elf | 78ee25fe7 | important | 418 419### New 420 4211. Supports analyze infrared signals of various protocols during system suspend by software, which needs to be used together with mcu. 422 423------ 424 425## rk3588_bl31_v1.35.elf 426 427| Date | File | Build commit | Severity | 428| ---------- | :-------------------- | ------------ | --------- | 429| 2023-01-16 | rk3588_bl31_v1.35.elf | bd7bac37a | important | 430 431### New 432 4331. Improve the stability of hdmirx. 434 435------ 436 437## rk3588_bl31_v1.34.elf 438 439| Date | File | Build commit | Severity | 440| ---------- | :-------------------- | ------------ | --------- | 441| 2023-01-10 | rk3588_bl31_v1.34.elf | e63a16361 | important | 442 443### New 444 4451. Support hptimer to use soft adjust mode. 4462. Support pvtpll to add length. 447 448### Fixed 449 450| Index | Severity | Update | Issue description | Issue source | 451| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ | 452| 1 | important | Avoid pmu mcu to boot accidentally in system suspend. | With pmu mcu's accidental boot, linux kernel's code and data may be overwrite after system resume. | - | 453 454------ 455 456## rk3588_spl_v1.12.bin 457 458| Date | File | Build commit | Severity | 459| ---------- | :-------------------- | ------------ | --------- | 460| 2022-12-26 | rk3588_spl_v1.12.bin | 5f53abfa | important | 461 462### New 463 4641. Support SPL AB. 465 466------ 467 468## rk3588_bl31_v1.33.elf 469 470| Date | File | Build commit | Severity | 471| ---------- | :-------------------- | ------------ | --------- | 472| 2022-12-07 | rk3588_bl31_v1.33.elf | 17b41886e | important | 473 474### New 475 4761. Support rk3588m, rk3588j. 477 478------ 479 480## rk3588_usbplug_v1.10.bin 481 482| Date | File | Build commit | Severity | 483| ---------- | :----------------------- | ------------ | --------- | 484| 2022-11-22 | rk3588_usbplug_v1.10.bin | b0e3c43c2 | important | 485 486### New 487 4881. Improve compatibility. 489 490------ 491 492## rk3588_bl31_v1.32.elf 493 494| Date | File | Build commit | Severity | 495| ---------- | :-------------------- | ------------ | --------- | 496| 2022-11-21 | rk3588_bl31_v1.32.elf | e529a2760 | important | 497 498### New 499 5001. Support bus auto CS. 501 502------ 503 504## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin 505 506| Date | File | Build commit | Severity | 507| ---------- | :------------------------------------------- | ------------ | --------- | 508| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin | a930779e06 | important | 509 510### New 511 5121. Derate/perbank refresh can be enable/disable by ddrbin_tool. 5132. Support pstore function. 5143. Boot FSP configurable by ddrbin_tool. 5154. Enable LPDDR5 DMC function. 5165. Support LPDDR5 byte mode DRAM. 5176. Recycle 256MB memory(overlap with REG space). This function can be disable by ddrbin_tool. 518 519### Fixed 520 521| Index | Severity | Update | Issue description | Issue source | 522| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 523| 1 | important | Fix WRTRN Bug | Fix WRTRN bug when ddr freq between 533MHz - 1066MHz | - | 524| 2 | important | Fix ZQCALIB bug | Increase auto ZQCALIB command period to 470ms | - | 525| 3 | important | Fix 528M bug | 528MHz undo RDTRN, SW*skew should be clean before clean before switch to 528MHz. | - | 526| 4 | important | Improve LPDDR5 stability and performance | Fix some LPDDR5 timing like rd2wr,wr2rd and hash config to improve stability and performance. | - | 527| 5 | important | LP4/LP4x support 32GB cap | LP4/LP4x support 32GB cap | - | 528 529------ 530 531## rk3588_bl31_v1.31.elf 532 533| Date | File | Build commit | Severity | 534| ---------- | :-------------------- | ------------ | --------- | 535| 2022-11-09 | rk3588_bl31_v1.31.elf | 91e396185 | important | 536 537### New 538 5391. Enable RK_ENABLE_A76_L2_FLUSH_TO_L3 function. 5402. Support amp function. 541 542### Fixed 543 544| Index | Severity | Update | Issue description | Issue source | 545| ----- | --------- | ------------------------------------------------------------ | ----------------- | ------------ | 546| 1 | important | Save/restore some performance setting in system suspend/resume | - | - | 547 548------ 549 550## rk3588_bl31_v1.30.elf 551 552| Date | File | Build commit | Severity | 553| ---------- | :-------------------- | ------------ | --------- | 554| 2022-10-12 | rk3588_bl31_v1.30.elf | 1450d21e8 | important | 555 556### New 557 5581. Support pstore. 559 560------ 561 562## rk3588_bl31_v1.29.elf 563 564| Date | File | Build commit | Severity | 565| ---------- | :-------------------- | ----------- | --------- | 566| 2022-09-29 | rk3588_bl31_v1.29.elf | 686b5c48b | important | 567 568### New 569 5701. Add A55 AT speculative patches. 5712. Add LPDDR5 DFS patches, support DFS between rows. 5723. Config FW-DSU region according to the specific DDR channel. 573 574### Fixed 575 576| Index | Severity | Update | Issue description | Issue source | 577| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 578| 1 | important | Fix problem about CEC wakeup. | When waiting for CEC wakeup source in system suspend, gpio1/3 irq will wakeup both AP and mcu . | - | 579| 2 | important | Fix configuration about ddr. | Fix ddr-unstable problem. | - | 580| 3 | important | Fix problem in system suspend if disable uart. | If loader disable uart, system suspend will panic. | - | 581 582------ 583 584## rk3588_bl32_v1.12.bin 585 586| Date | File | Build commit | Severity | 587| ---------- | :-------------------- | ------------ | --------- | 588| 2022-09-20 | rk3588_bl32_v1.12.bin | 4542e1efd | important | 589 590### New 591 5921. Config FW-DSU region according to the specific DDR channel. 593 594------ 595 596## rk3588_bl32_v1.11.bin 597 598| Date | File | Build commit | Severity | 599| ---------- | :-------------------- | ------------ | --------- | 600| 2022-09-15 | rk3588_bl32_v1.11.bin | d84087907 | important | 601 602### Fixed 603 604| Index | Severity | Update | Issue description | Issue source | 605| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 606| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - | 607 608------ 609 610