1# RK3588 Release Note 2 3## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.18.bin 4 5| Date | File | Build commit | Severity | 6| ---------- | :------------------------------------------- | ------------ | --------- | 7| 2024-09-05 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.18.bin | 9fa84341ce | important | 8 9### Warn 10 111. BL31 should be update to V1.47 or above. 12 13### New 14 151. Enable dvfs/periodic training to increase SI margin. 162. Added support for (x16/x8)mixed packaging particles. 17 18### Fixed 19 20| Index | Severity | Update | Issue description | Issue source | 21| ----- | --------- | --------------------------------------------------------- | ----------------- | ------------ | 22| 1 | important | Modified tTOT configuration to improve DRAM compatibility | - | - | 23 24------ 25 26## rk3588_bl31_v1.47.elf 27 28| Date | File | Build commit | Severity | 29| ---------- | :-------------------- | ------------ | --------- | 30| 2024-09-04 | rk3588_bl31_v1.47.elf | 92b1674a5 | important | 31 32### New 33 341. Support to respond to interrupts of kernel in OPTEE. 352. Improve stability of VOP. 363. Restored status of dvfs/periodic training after system wake up. 37 38------ 39 40## rk3588_bl32_v1.17.bin 41 42| Date | File | Build commit | Severity | 43| ---------- | :-------------------- | ------------ | --------- | 44| 2024-09-02 | rk3588_bl32_v1.17.bin | 6c78a7d8c | important | 45 46### New 47 481. Support software TA encryption key, customers can use TA encryption function without burning the key. 492. RPMB change read data to multiple times. 503. Increase MPI_MEMPOOL_SIZE size. 51 52------ 53 54## rk3588_bl31_v1.46.elf 55 56| Date | File | Build commit | Severity | 57| ---------- | :-------------------- | ------------ | --------- | 58| 2024-04-29 | rk3588_bl31_v1.46.elf | 588059758 | important | 59 60### New 61 621. Support to config pmu_mcu in kernel. 632. Improve stability of DFS in single chip lpddr5. 64 65------ 66 67## rk3588_bl32_v1.16.bin 68 69| Date | File | Build commit | Severity | 70| ---------- | :-------------------- | ------------ | --------- | 71| 2024-04-16 | rk3588_bl32_v1.16.bin | 185dc3c92 | important | 72 73### New 74 751. Optimization parameter check to enhance security. 762. Support printing TEE memory usage information. 773. Hardware crypto supports addresses exceeding 4G. 78 79------ 80 81## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin 82 83| Date | File | Build commit | Severity | 84| ---------- | :------------------------------------------- | ------------ | --------- | 85| 2024-04-12 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin | 3488111f83 | important | 86 87### Fixed 88 89| Index | Severity | Update | Issue description | Issue source | 90| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 91| 1 | important | Fixed the error of pll_id setting when boot_fsp!=0，the default value of boot_fsp is 0. | Maybe hang in ddr initialization when boot_fsp is configured to a non-zero value. | - | 92 93------ 94 95## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin 96 97| Date | File | Build commit | Severity | 98| ---------- | :------------------------------------------- | ------------ | --------- | 99| 2024-02-04 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin | 9fffbe1e78 | important | 100 101### New 102 1031. Modify the LPDDR5 frequency to improve stability. 1042. Add support dram with CS0 capacity less than CS1 capacity. 1053. Modify the DERATEINT.mr4_read_interval configuration. 106 107### Fixed 108 109| Index | Severity | Update | Issue description | Issue source | 110| ----- | --------- | ------------------------------------------- | ------------------------------------------------------------ | ------------ | 111| 1 | important | Fixed derate issue with LPDDR5 of one rank. | Maybe hang in kernel when switch the frequency for LPDDR5 of one rank. | - | 112 113------ 114 115## rk3588_bl31_v1.45.elf 116 117| Date | File | Build commit | Severity | 118| ---------- | :-------------------- | ------------ | --------- | 119| 2023-12-27 | rk3588_bl31_v1.45.elf | 4ca8a8422 | important | 120 121### New 122 1231. Optimize the time of DFS atfter system resume. 1242. Cpu switch to hight frequency when systeme resume. 1253. Support config pvtpll parameters by sip. 126 127------ 128 129## rk3588_pcie_v2.10.bin 130 131| Date | File | Build commit | Severity | 132| ---------- | --------------------- | ------------ | -------- | 133| 2023-12-18 | rk3588_pcie_v2.10.bin | 35f57cde3 | moderate | 134 135### New 136 1371. Update the version. 138 139------ 140 141## rk3588_pcie_v2.00.bin 142 143| Date | File | Build commit | Severity | 144| ---------- | --------------------- | ------------ | -------- | 145| 2023-12-06 | rk3588_pcie_v2.00.bin | I3e280b78 | moderate | 146 147### New 148 1491. Fix bar capacity. 150 151------ 152 153## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin 154 155| Date | File | Build commit | Severity | 156| ---------- | :------------------------------------------- | ------------ | --------- | 157| 2023-11-23 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin | d5483af87d | important | 158 159### New 160 1611. Avoid PHY skew value greater than dll lock value，improve the stability for 528MHz. 1622. Fix the data training process，improve the stability. 1633. Resume ZQ background calibration for LPDDR5. 164 165------ 166 167## rk3588_usbplug_v1.11.bin 168 169| Date | File | Build commit | Severity | 170| ---------- | :----------------------- | ------------ | --------- | 171| 2023-11-20 | rk3588_usbplug_v1.11.bin | dcac518e7 | important | 172 173### New 174 1751. Add rk3583 upgrade support. 176 177------ 178 179## rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin 180 181| Date | File | Build commit | Severity | 182| ---------- | :------------------------------------------- | ------------ | --------- | 183| 2023-11-10 | rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin | 73dffea49e | important | 184 185### New 186 1871. Add RK3583 support. 188 189------ 190 191## rk3588_bl31_v1.44.elf 192 193| Date | File | Build commit | Severity | 194| ---------- | :-------------------- | ------------ | --------- | 195| 2023-11-07 | rk3588_bl31_v1.44.elf | 4acbe711b | important | 196 197### New 198 1991. Add pvtpll support rk3583. 2002. Add support to read secure otp. 2013. Optimize the time of dmc restore. 202 203------ 204 205## rk3588_pcie_v1.00.bin 206 207| Date | File | Build commit | Severity | 208| ---------- | --------------------- | ------------ | -------- | 209| 2023-10-07 | rk3588_pcie_v1.00.bin | I01c2c7d7 | moderate | 210 211### New 212 2131. Add bare system executable firmware that supports PCIe EP initialization. 214 215------ 216 217## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin 218 219| Date | File | Build commit | Severity | 220| ---------- | :------------------------------------------- | ------------ | --------- | 221| 2023-09-26 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin | 73dffea49e | important | 222 223### New 224 2251. Improve the stability of LPDDR5. 2262. Add fwver support. 227 228------ 229 230## rk3588_bl32_v1.15.bin 231 232| Date | File | Build commit | Severity | 233| ---------- | :-------------------- | ------------ | --------- | 234| 2023-09-25 | rk3588_bl32_v1.15.bin | 62aa10b7 | important | 235 236### New 237 2381. Support print firmware version, and support transmit firmware version to subsequent firmware. 239 240------ 241 242## rk3588_bl31_v1.43.elf 243 244| Date | File | Build commit | Severity | 245| ---------- | :-------------------- | ------------ | --------- | 246| 2023-09-26 | rk3588_bl31_v1.43.elf | 24b7dd41a | important | 247 248### New 249 2501. Supports to pass bl31 version number through rk atags. 2512. Support to configure wake sources for virtual-poweroff through dts. 252 253------ 254 255## rk3588_spl_v1.13.bin 256 257| Date | File | Build commit | Severity | 258| ---------- | :------------------- | ------------ | --------- | 259| 2023-09-25 | rk3588_spl_v1.13.bin | e4e124926e | important | 260 261### New 262 2631. Print and pass the firmware version number. 264 265### Fixed 266 267| Index | Severity | Update | Issue description | Issue source | 268| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 269| 1 | important | Solve the issue that the backup image is not loaded when the SPL load or check u-boot.dtb fails | When u-boot.dtb of the first uboot.img is corrupted, SPL doesn't load the backup image. | - | 270------ 271 272## rk3588_bl31_v1.42.elf 273 274| Date | File | Build commit | Severity | 275| ---------- | :-------------------- | ------------ | --------- | 276| 2023-09-09 | rk3588_bl31_v1.42.elf | 87bcc5dfe | important | 277 278### New 279 2801. Optimize the time of system resume. 2812. Support any cpu to do system suspend/resume. 2823. Support all pwm int to wakeup when virtual-poweroff. 283 284------ 285 286## rk3588_bl32_v1.14.bin 287 288| Date | File | Build commit | Severity | 289| ---------- | :-------------------- | ------------ | --------- | 290| 2023-08-28 | rk3588_bl32_v1.14.bin | b5340fd65 | important | 291 292### New 293 2941. Pseudo random number seed will be set by default. 2952. Supports read and write security flag interfaces. 2963. Support check ta encryption key is written. 297 298### Fixed 299 300| Index | Severity | Update | Issue description | Issue source | 301| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------- | ------------ | 302| 1 | important | Fixed hardware crypto probability crash issue after enabling dynamic memory | Error will be reported when using hardware crypto | - | 303 304------ 305 306## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin 307 308| Date | File | Build commit | Severity | 309| ---------- | :------------------------------------------- | ------------ | --------- | 310| 2023-08-11 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin | 25cee80c4f | important | 311 312### Warn 313 3141. BL31 should be update to V1.41 or above. 315 316### New 317 3181. Improve the stability of LPDDR5 528MHz. 3192. Update vref_inner for each channel in fsp_param to improve stability. 320 321### Fixed 322 323| Index | Severity | Update | Issue description | Issue source | 324| ----- | --------- | ------------------------------------------------------------ | --------------------------------------------------------- | ------------ | 325| 1 | important | Fixed init fail issue that boot in high temperature environment | Panic in ddrbin when boot in high temperature environment | - | 326 327------ 328 329## rk3588_bl31_v1.41.elf 330 331| Date | File | Build commit | Severity | 332| ---------- | :-------------------- | ------------ | --------- | 333| 2023-08-10 | rk3588_bl31_v1.41.elf | b7c5102a2 | important | 334 335### New 336 3371. Support L3 partition. 3382. Update configuration of ddr vref_inner. 3393. Support to config MCU sleep parameter through DTS. 340 341------ 342 343## rk3588_bl31_v1.40.elf 344 345| Date | File | Build commit | Severity | 346| ---------- | :-------------------- | ------------ | --------- | 347| 2023-07-13 | rk3588_bl31_v1.40.elf | dc1125f48 | important | 348 349### New 350 3511. Add support to reset vop sub mem pd. 352 353------ 354 355## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin 356 357| Date | File | Build commit | Severity | 358| ---------- | :------------------------------------------- | ------------ | --------- | 359| 2023-07-06 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin | 52218f4949 | important | 360 361### New 362 3631. Add support print training result and mr value. 364 365### Fixed 366 367| Index | Severity | Update | Issue description | Issue source | 368| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 369| 1 | important | Fixed init fail issue that max freq between 1066-1600MHz | Panic in ddrbin when max DDR freq between 1066-1600MHz. | - | 370| 2 | important | Fixed the issue painc in ddrbin caused by multiple initialization of DDR | When the first SPL firmware failed to load, reloading the second firmware would result in repeated initialization of the DDR. This caused a panic in ddrbin. | - | 371 372------ 373 374## rk3588_bl31_v1.39.elf 375 376| Date | File | Build commit | Severity | 377| ---------- | :-------------------- | ------------ | --------- | 378| 2023-06-27 | rk3588_bl31_v1.39.elf | 001b4889e | important | 379 380### New 381 3821. Change read size to 128 bytes. 3832. Adjust pvtpll table by otp. 3843. Modify pvtpll table for rk3588j/m. 385 386------ 387 388## rk3588_bl31_v1.38.elf 389 390| Date | File | Build commit | Severity | 391| ---------- | :-------------------- | ------------ | --------- | 392| 2023-05-09 | rk3588_bl31_v1.38.elf | 3389cfdda | important | 393 394### Warn 395 3961. DDR bin should be update to V1.11 or above. 397 398### New 399 4001. Update configuration of ddr lp5 mr. 4012. Improve the stability of hdmirx. 4023. Support ddr spread spectrum mode. 403 404------ 405 406## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin 407 408| Date | File | Build commit | Severity | 409| ---------- | :------------------------------------------- | ------------ | --------- | 410| 2023-05-09 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin | f1474cf52f | important | 411 412### Warn 413 4141. BL31 should be update to V1.38 or above. 415 416### New 417 4181. Added more print info when initialization fails to help locate soldering issues. 4192. Optimizing boot time. 4203. Enable per bank refresh function. 4214. LPDDR5 4 channels use different write vref values to improve stability. 4225. First init LPDDR4x. 4236. LPDDR5 cavref update to 36%. 4247. Add support spread spectrum mode. 425 426------ 427 428## rk3588_bl32_v1.13.bin 429 430| Date | File | Build commit | Severity | 431| ---------- | :-------------------- | ------------ | --------- | 432| 2023-04-19 | rk3588_bl32_v1.13.bin | 7f1ea6d6e | important | 433 434### New 435 4361. OTP supports burst read to accelerate BL32 startup speed. 4372. Kernel support read secure boot flag and public key hash. 4383. Support dynamic shared memory, and the secure and normal world can transfer more larger data. 4394. BL32 supports pstore, and the kernel can view print info of BL32 through pstore node. 440 441------ 442 443## rk3588_bl31_v1.37.elf 444 445| Date | File | Build commit | Severity | 446| ---------- | :-------------------- | ------------ | --------- | 447| 2023-03-08 | rk3588_bl31_v1.37.elf | 9609b9c19 | important | 448 449### New 450 4511. Save/restore u2phy_grf registers when system suspend/resume. 4522. Save/restore more ddr related registers when system suspend/resume. 4533. Compatible with system suspend/resume in QNX. 454 455------ 456 457## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin 458 459| Date | File | Build commit | Severity | 460| ---------- | :------------------------------------------- | ------------ | --------- | 461| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin | 75d050770f | important | 462 463### New 464 4651. Pageclose can be enable/disable by ddrbin_tool. 466 467### Fixed 468 469| Index | Severity | Update | Issue description | Issue source | 470| ----- | --------- | ---------------------------- | ------------------------------------------------------------ | ------------ | 471| 1 | important | fix total 24GB bug | If the DDR total capacity is 24GB, it will be stuck and unable to enter kernel. | - | 472| 2 | important | fix LP4/LP4X stability issue | Some LP4/LP4X board need to update read odt to 40ohm to fix stability issue. Note: BL31 should be update to V1.37. | - | 473| 3 | important | improve LP5 performance | LPDDR5 timing tWTR calculate error lead to slow performance | - | 474 475------ 476 477## rk3588_bl31_v1.36.elf 478 479| Date | File | Build commit | Severity | 480| ---------- | :-------------------- | ------------ | --------- | 481| 2023-01-30 | rk3588_bl31_v1.36.elf | 78ee25fe7 | important | 482 483### New 484 4851. Supports analyze infrared signals of various protocols during system suspend by software, which needs to be used together with mcu. 486 487------ 488 489## rk3588_bl31_v1.35.elf 490 491| Date | File | Build commit | Severity | 492| ---------- | :-------------------- | ------------ | --------- | 493| 2023-01-16 | rk3588_bl31_v1.35.elf | bd7bac37a | important | 494 495### New 496 4971. Improve the stability of hdmirx. 498 499------ 500 501## rk3588_bl31_v1.34.elf 502 503| Date | File | Build commit | Severity | 504| ---------- | :-------------------- | ------------ | --------- | 505| 2023-01-10 | rk3588_bl31_v1.34.elf | e63a16361 | important | 506 507### New 508 5091. Support hptimer to use soft adjust mode. 5102. Support pvtpll to add length. 511 512### Fixed 513 514| Index | Severity | Update | Issue description | Issue source | 515| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ | 516| 1 | important | Avoid pmu mcu to boot accidentally in system suspend. | With pmu mcu's accidental boot, linux kernel's code and data may be overwrite after system resume. | - | 517 518------ 519 520## rk3588_spl_v1.12.bin 521 522| Date | File | Build commit | Severity | 523| ---------- | :-------------------- | ------------ | --------- | 524| 2022-12-26 | rk3588_spl_v1.12.bin | 5f53abfa | important | 525 526### New 527 5281. Support SPL AB. 529 530------ 531 532## rk3588_bl31_v1.33.elf 533 534| Date | File | Build commit | Severity | 535| ---------- | :-------------------- | ------------ | --------- | 536| 2022-12-07 | rk3588_bl31_v1.33.elf | 17b41886e | important | 537 538### New 539 5401. Support rk3588m, rk3588j. 541 542------ 543 544## rk3588_usbplug_v1.10.bin 545 546| Date | File | Build commit | Severity | 547| ---------- | :----------------------- | ------------ | --------- | 548| 2022-11-22 | rk3588_usbplug_v1.10.bin | b0e3c43c2 | important | 549 550### New 551 5521. Improve compatibility. 553 554------ 555 556## rk3588_bl31_v1.32.elf 557 558| Date | File | Build commit | Severity | 559| ---------- | :-------------------- | ------------ | --------- | 560| 2022-11-21 | rk3588_bl31_v1.32.elf | e529a2760 | important | 561 562### New 563 5641. Support bus auto CS. 565 566------ 567 568## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin 569 570| Date | File | Build commit | Severity | 571| ---------- | :------------------------------------------- | ------------ | --------- | 572| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin | a930779e06 | important | 573 574### New 575 5761. Derate/perbank refresh can be enable/disable by ddrbin_tool. 5772. Support pstore function. 5783. Boot FSP configurable by ddrbin_tool. 5794. Enable LPDDR5 DMC function. 5805. Support LPDDR5 byte mode DRAM. 5816. Recycle 256MB memory(overlap with REG space). This function can be disable by ddrbin_tool. 582 583### Fixed 584 585| Index | Severity | Update | Issue description | Issue source | 586| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 587| 1 | important | Fix WRTRN Bug | Fix WRTRN bug when ddr freq between 533MHz - 1066MHz | - | 588| 2 | important | Fix ZQCALIB bug | Increase auto ZQCALIB command period to 470ms | - | 589| 3 | important | Fix 528M bug | 528MHz undo RDTRN, SW*skew should be clean before clean before switch to 528MHz. | - | 590| 4 | important | Improve LPDDR5 stability and performance | Fix some LPDDR5 timing like rd2wr,wr2rd and hash config to improve stability and performance. | - | 591| 5 | important | LP4/LP4x support 32GB cap | LP4/LP4x support 32GB cap | - | 592 593------ 594 595## rk3588_bl31_v1.31.elf 596 597| Date | File | Build commit | Severity | 598| ---------- | :-------------------- | ------------ | --------- | 599| 2022-11-09 | rk3588_bl31_v1.31.elf | 91e396185 | important | 600 601### New 602 6031. Enable RK_ENABLE_A76_L2_FLUSH_TO_L3 function. 6042. Support amp function. 605 606### Fixed 607 608| Index | Severity | Update | Issue description | Issue source | 609| ----- | --------- | ------------------------------------------------------------ | ----------------- | ------------ | 610| 1 | important | Save/restore some performance setting in system suspend/resume | - | - | 611 612------ 613 614## rk3588_bl31_v1.30.elf 615 616| Date | File | Build commit | Severity | 617| ---------- | :-------------------- | ------------ | --------- | 618| 2022-10-12 | rk3588_bl31_v1.30.elf | 1450d21e8 | important | 619 620### New 621 6221. Support pstore. 623 624------ 625 626## rk3588_bl31_v1.29.elf 627 628| Date | File | Build commit | Severity | 629| ---------- | :-------------------- | ----------- | --------- | 630| 2022-09-29 | rk3588_bl31_v1.29.elf | 686b5c48b | important | 631 632### New 633 6341. Add A55 AT speculative patches. 6352. Add LPDDR5 DFS patches, support DFS between rows. 6363. Config FW-DSU region according to the specific DDR channel. 637 638### Fixed 639 640| Index | Severity | Update | Issue description | Issue source | 641| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 642| 1 | important | Fix problem about CEC wakeup. | When waiting for CEC wakeup source in system suspend, gpio1/3 irq will wakeup both AP and mcu . | - | 643| 2 | important | Fix configuration about ddr. | Fix ddr-unstable problem. | - | 644| 3 | important | Fix problem in system suspend if disable uart. | If loader disable uart, system suspend will panic. | - | 645 646------ 647 648## rk3588_bl32_v1.12.bin 649 650| Date | File | Build commit | Severity | 651| ---------- | :-------------------- | ------------ | --------- | 652| 2022-09-20 | rk3588_bl32_v1.12.bin | 4542e1efd | important | 653 654### New 655 6561. Config FW-DSU region according to the specific DDR channel. 657 658------ 659 660## rk3588_bl32_v1.11.bin 661 662| Date | File | Build commit | Severity | 663| ---------- | :-------------------- | ------------ | --------- | 664| 2022-09-15 | rk3588_bl32_v1.11.bin | d84087907 | important | 665 666### Fixed 667 668| Index | Severity | Update | Issue description | Issue source | 669| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 670| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - | 671 672------ 673 674