1# RK3588 Release Note 2 3## rk3588_bl31_v1.46.elf 4 5| Date | File | Build commit | Severity | 6| ---------- | :-------------------- | ------------ | --------- | 7| 2024-04-29 | rk3588_bl31_v1.46.elf | 588059758 | important | 8 9### New 10 111. Support to config pmu_mcu in kernel. 122. Improve stability of DFS in single chip lpddr5. 13 14------ 15 16## rk3588_bl32_v1.16.bin 17 18| Date | File | Build commit | Severity | 19| ---------- | :-------------------- | ------------ | --------- | 20| 2024-04-16 | rk3588_bl32_v1.16.bin | 185dc3c92 | important | 21 22### New 23 241. Optimization parameter check to enhance security. 252. Support printing TEE memory usage information. 263. Hardware crypto supports addresses exceeding 4G. 27 28------ 29 30## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin 31 32| Date | File | Build commit | Severity | 33| ---------- | :------------------------------------------- | ------------ | --------- | 34| 2024-04-12 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin | 3488111f83 | important | 35 36### Fixed 37 38| Index | Severity | Update | Issue description | Issue source | 39| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 40| 1 | important | Fixed the error of pll_id setting when boot_fsp!=0，the default value of boot_fsp is 0. | Maybe hang in ddr initialization when boot_fsp is configured to a non-zero value. | - | 41 42------ 43 44## rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin 45 46| Date | File | Build commit | Severity | 47| ---------- | :------------------------------------------- | ------------ | --------- | 48| 2024-02-04 | rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin | 9fffbe1e78 | important | 49 50### New 51 521. Modify the LPDDR5 frequency to improve stability. 532. Add support dram with CS0 capacity less than CS1 capacity. 543. Modify the DERATEINT.mr4_read_interval configuration. 55 56### Fixed 57 58| Index | Severity | Update | Issue description | Issue source | 59| ----- | --------- | ------------------------------------------- | ------------------------------------------------------------ | ------------ | 60| 1 | important | Fixed derate issue with LPDDR5 of one rank. | Maybe hang in kernel when switch the frequency for LPDDR5 of one rank. | - | 61 62------ 63 64## rk3588_bl31_v1.45.elf 65 66| Date | File | Build commit | Severity | 67| ---------- | :-------------------- | ------------ | --------- | 68| 2023-12-27 | rk3588_bl31_v1.45.elf | 4ca8a8422 | important | 69 70### New 71 721. Optimize the time of DFS atfter system resume. 732. Cpu switch to hight frequency when systeme resume. 743. Support config pvtpll parameters by sip. 75 76------ 77 78## rk3588_pcie_v2.10.bin 79 80| Date | File | Build commit | Severity | 81| ---------- | --------------------- | ------------ | -------- | 82| 2023-12-18 | rk3588_pcie_v2.10.bin | 35f57cde3 | moderate | 83 84### New 85 861. Update the version. 87 88------ 89 90## rk3588_pcie_v2.00.bin 91 92| Date | File | Build commit | Severity | 93| ---------- | --------------------- | ------------ | -------- | 94| 2023-12-06 | rk3588_pcie_v2.00.bin | I3e280b78 | moderate | 95 96### New 97 981. Fix bar capacity. 99 100------ 101 102## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin 103 104| Date | File | Build commit | Severity | 105| ---------- | :------------------------------------------- | ------------ | --------- | 106| 2023-11-23 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.15.bin | d5483af87d | important | 107 108### New 109 1101. Avoid PHY skew value greater than dll lock value，improve the stability for 528MHz. 1112. Fix the data training process，improve the stability. 1123. Resume ZQ background calibration for LPDDR5. 113 114------ 115 116## rk3588_usbplug_v1.11.bin 117 118| Date | File | Build commit | Severity | 119| ---------- | :----------------------- | ------------ | --------- | 120| 2023-11-20 | rk3588_usbplug_v1.11.bin | dcac518e7 | important | 121 122### New 123 1241. Add rk3583 upgrade support. 125 126------ 127 128## rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin 129 130| Date | File | Build commit | Severity | 131| ---------- | :------------------------------------------- | ------------ | --------- | 132| 2023-11-10 | rk3583_ddr_lp4_1848MHz_lp5_2112MHz_v1.14.bin | 73dffea49e | important | 133 134### New 135 1361. Add RK3583 support. 137 138------ 139 140## rk3588_bl31_v1.44.elf 141 142| Date | File | Build commit | Severity | 143| ---------- | :-------------------- | ------------ | --------- | 144| 2023-11-07 | rk3588_bl31_v1.44.elf | 4acbe711b | important | 145 146### New 147 1481. Add pvtpll support rk3583. 1492. Add support to read secure otp. 1503. Optimize the time of dmc restore. 151 152------ 153 154## rk3588_pcie_v1.00.bin 155 156| Date | File | Build commit | Severity | 157| ---------- | --------------------- | ------------ | -------- | 158| 2023-10-07 | rk3588_pcie_v1.00.bin | I01c2c7d7 | moderate | 159 160### New 161 1621. Add bare system executable firmware that supports PCIe EP initialization. 163 164------ 165 166## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin 167 168| Date | File | Build commit | Severity | 169| ---------- | :------------------------------------------- | ------------ | --------- | 170| 2023-09-26 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.14.bin | 73dffea49e | important | 171 172### New 173 1741. Improve the stability of LPDDR5. 1752. Add fwver support. 176 177------ 178 179## rk3588_bl32_v1.15.bin 180 181| Date | File | Build commit | Severity | 182| ---------- | :-------------------- | ------------ | --------- | 183| 2023-09-25 | rk3588_bl32_v1.15.bin | 62aa10b7 | important | 184 185### New 186 1871. Support print firmware version, and support transmit firmware version to subsequent firmware. 188 189------ 190 191## rk3588_bl31_v1.43.elf 192 193| Date | File | Build commit | Severity | 194| ---------- | :-------------------- | ------------ | --------- | 195| 2023-09-26 | rk3588_bl31_v1.43.elf | 24b7dd41a | important | 196 197### New 198 1991. Supports to pass bl31 version number through rk atags. 2002. Support to configure wake sources for virtual-poweroff through dts. 201 202------ 203 204## rk3588_spl_v1.13.bin 205 206| Date | File | Build commit | Severity | 207| ---------- | :------------------- | ------------ | --------- | 208| 2023-09-25 | rk3588_spl_v1.13.bin | e4e124926e | important | 209 210### New 211 2121. Print and pass the firmware version number. 213 214### Fixed 215 216| Index | Severity | Update | Issue description | Issue source | 217| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 218| 1 | important | Solve the issue that the backup image is not loaded when the SPL load or check u-boot.dtb fails | When u-boot.dtb of the first uboot.img is corrupted, SPL doesn't load the backup image. | - | 219------ 220 221## rk3588_bl31_v1.42.elf 222 223| Date | File | Build commit | Severity | 224| ---------- | :-------------------- | ------------ | --------- | 225| 2023-09-09 | rk3588_bl31_v1.42.elf | 87bcc5dfe | important | 226 227### New 228 2291. Optimize the time of system resume. 2302. Support any cpu to do system suspend/resume. 2313. Support all pwm int to wakeup when virtual-poweroff. 232 233------ 234 235## rk3588_bl32_v1.14.bin 236 237| Date | File | Build commit | Severity | 238| ---------- | :-------------------- | ------------ | --------- | 239| 2023-08-28 | rk3588_bl32_v1.14.bin | b5340fd65 | important | 240 241### New 242 2431. Pseudo random number seed will be set by default. 2442. Supports read and write security flag interfaces. 2453. Support check ta encryption key is written. 246 247### Fixed 248 249| Index | Severity | Update | Issue description | Issue source | 250| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------- | ------------ | 251| 1 | important | Fixed hardware crypto probability crash issue after enabling dynamic memory | Error will be reported when using hardware crypto | - | 252 253------ 254 255## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin 256 257| Date | File | Build commit | Severity | 258| ---------- | :------------------------------------------- | ------------ | --------- | 259| 2023-08-11 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin | 25cee80c4f | important | 260 261### Warn 262 2631. BL31 should be update to V1.41 or above. 264 265### New 266 2671. Improve the stability of LPDDR5 528MHz. 2682. Update vref_inner for each channel in fsp_param to improve stability. 269 270### Fixed 271 272| Index | Severity | Update | Issue description | Issue source | 273| ----- | --------- | ------------------------------------------------------------ | --------------------------------------------------------- | ------------ | 274| 1 | important | Fixed init fail issue that boot in high temperature environment | Panic in ddrbin when boot in high temperature environment | - | 275 276------ 277 278## rk3588_bl31_v1.41.elf 279 280| Date | File | Build commit | Severity | 281| ---------- | :-------------------- | ------------ | --------- | 282| 2023-08-10 | rk3588_bl31_v1.41.elf | b7c5102a2 | important | 283 284### New 285 2861. Support L3 partition. 2872. Update configuration of ddr vref_inner. 2883. Support to config MCU sleep parameter through DTS. 289 290------ 291 292## rk3588_bl31_v1.40.elf 293 294| Date | File | Build commit | Severity | 295| ---------- | :-------------------- | ------------ | --------- | 296| 2023-07-13 | rk3588_bl31_v1.40.elf | dc1125f48 | important | 297 298### New 299 3001. Add support to reset vop sub mem pd. 301 302------ 303 304## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin 305 306| Date | File | Build commit | Severity | 307| ---------- | :------------------------------------------- | ------------ | --------- | 308| 2023-07-06 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin | 52218f4949 | important | 309 310### New 311 3121. Add support print training result and mr value. 313 314### Fixed 315 316| Index | Severity | Update | Issue description | Issue source | 317| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 318| 1 | important | Fixed init fail issue that max freq between 1066-1600MHz | Panic in ddrbin when max DDR freq between 1066-1600MHz. | - | 319| 2 | important | Fixed the issue painc in ddrbin caused by multiple initialization of DDR | When the first SPL firmware failed to load, reloading the second firmware would result in repeated initialization of the DDR. This caused a panic in ddrbin. | - | 320 321------ 322 323## rk3588_bl31_v1.39.elf 324 325| Date | File | Build commit | Severity | 326| ---------- | :-------------------- | ------------ | --------- | 327| 2023-06-27 | rk3588_bl31_v1.39.elf | 001b4889e | important | 328 329### New 330 3311. Change read size to 128 bytes. 3322. Adjust pvtpll table by otp. 3333. Modify pvtpll table for rk3588j/m. 334 335------ 336 337## rk3588_bl31_v1.38.elf 338 339| Date | File | Build commit | Severity | 340| ---------- | :-------------------- | ------------ | --------- | 341| 2023-05-09 | rk3588_bl31_v1.38.elf | 3389cfdda | important | 342 343### Warn 344 3451. DDR bin should be update to V1.11 or above. 346 347### New 348 3491. Update configuration of ddr lp5 mr. 3502. Improve the stability of hdmirx. 3513. Support ddr spread spectrum mode. 352 353------ 354 355## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin 356 357| Date | File | Build commit | Severity | 358| ---------- | :------------------------------------------- | ------------ | --------- | 359| 2023-05-09 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin | f1474cf52f | important | 360 361### Warn 362 3631. BL31 should be update to V1.38 or above. 364 365### New 366 3671. Added more print info when initialization fails to help locate soldering issues. 3682. Optimizing boot time. 3693. Enable per bank refresh function. 3704. LPDDR5 4 channels use different write vref values to improve stability. 3715. First init LPDDR4x. 3726. LPDDR5 cavref update to 36%. 3737. Add support spread spectrum mode. 374 375------ 376 377## rk3588_bl32_v1.13.bin 378 379| Date | File | Build commit | Severity | 380| ---------- | :-------------------- | ------------ | --------- | 381| 2023-04-19 | rk3588_bl32_v1.13.bin | 7f1ea6d6e | important | 382 383### New 384 3851. OTP supports burst read to accelerate BL32 startup speed. 3862. Kernel support read secure boot flag and public key hash. 3873. Support dynamic shared memory, and the secure and normal world can transfer more larger data. 3884. BL32 supports pstore, and the kernel can view print info of BL32 through pstore node. 389 390------ 391 392## rk3588_bl31_v1.37.elf 393 394| Date | File | Build commit | Severity | 395| ---------- | :-------------------- | ------------ | --------- | 396| 2023-03-08 | rk3588_bl31_v1.37.elf | 9609b9c19 | important | 397 398### New 399 4001. Save/restore u2phy_grf registers when system suspend/resume. 4012. Save/restore more ddr related registers when system suspend/resume. 4023. Compatible with system suspend/resume in QNX. 403 404------ 405 406## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin 407 408| Date | File | Build commit | Severity | 409| ---------- | :------------------------------------------- | ------------ | --------- | 410| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin | 75d050770f | important | 411 412### New 413 4141. Pageclose can be enable/disable by ddrbin_tool. 415 416### Fixed 417 418| Index | Severity | Update | Issue description | Issue source | 419| ----- | --------- | ---------------------------- | ------------------------------------------------------------ | ------------ | 420| 1 | important | fix total 24GB bug | If the DDR total capacity is 24GB, it will be stuck and unable to enter kernel. | - | 421| 2 | important | fix LP4/LP4X stability issue | Some LP4/LP4X board need to update read odt to 40ohm to fix stability issue. Note: BL31 should be update to V1.37. | - | 422| 3 | important | improve LP5 performance | LPDDR5 timing tWTR calculate error lead to slow performance | - | 423 424------ 425 426## rk3588_bl31_v1.36.elf 427 428| Date | File | Build commit | Severity | 429| ---------- | :-------------------- | ------------ | --------- | 430| 2023-01-30 | rk3588_bl31_v1.36.elf | 78ee25fe7 | important | 431 432### New 433 4341. Supports analyze infrared signals of various protocols during system suspend by software, which needs to be used together with mcu. 435 436------ 437 438## rk3588_bl31_v1.35.elf 439 440| Date | File | Build commit | Severity | 441| ---------- | :-------------------- | ------------ | --------- | 442| 2023-01-16 | rk3588_bl31_v1.35.elf | bd7bac37a | important | 443 444### New 445 4461. Improve the stability of hdmirx. 447 448------ 449 450## rk3588_bl31_v1.34.elf 451 452| Date | File | Build commit | Severity | 453| ---------- | :-------------------- | ------------ | --------- | 454| 2023-01-10 | rk3588_bl31_v1.34.elf | e63a16361 | important | 455 456### New 457 4581. Support hptimer to use soft adjust mode. 4592. Support pvtpll to add length. 460 461### Fixed 462 463| Index | Severity | Update | Issue description | Issue source | 464| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ | 465| 1 | important | Avoid pmu mcu to boot accidentally in system suspend. | With pmu mcu's accidental boot, linux kernel's code and data may be overwrite after system resume. | - | 466 467------ 468 469## rk3588_spl_v1.12.bin 470 471| Date | File | Build commit | Severity | 472| ---------- | :-------------------- | ------------ | --------- | 473| 2022-12-26 | rk3588_spl_v1.12.bin | 5f53abfa | important | 474 475### New 476 4771. Support SPL AB. 478 479------ 480 481## rk3588_bl31_v1.33.elf 482 483| Date | File | Build commit | Severity | 484| ---------- | :-------------------- | ------------ | --------- | 485| 2022-12-07 | rk3588_bl31_v1.33.elf | 17b41886e | important | 486 487### New 488 4891. Support rk3588m, rk3588j. 490 491------ 492 493## rk3588_usbplug_v1.10.bin 494 495| Date | File | Build commit | Severity | 496| ---------- | :----------------------- | ------------ | --------- | 497| 2022-11-22 | rk3588_usbplug_v1.10.bin | b0e3c43c2 | important | 498 499### New 500 5011. Improve compatibility. 502 503------ 504 505## rk3588_bl31_v1.32.elf 506 507| Date | File | Build commit | Severity | 508| ---------- | :-------------------- | ------------ | --------- | 509| 2022-11-21 | rk3588_bl31_v1.32.elf | e529a2760 | important | 510 511### New 512 5131. Support bus auto CS. 514 515------ 516 517## rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin 518 519| Date | File | Build commit | Severity | 520| ---------- | :------------------------------------------- | ------------ | --------- | 521| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin | a930779e06 | important | 522 523### New 524 5251. Derate/perbank refresh can be enable/disable by ddrbin_tool. 5262. Support pstore function. 5273. Boot FSP configurable by ddrbin_tool. 5284. Enable LPDDR5 DMC function. 5295. Support LPDDR5 byte mode DRAM. 5306. Recycle 256MB memory(overlap with REG space). This function can be disable by ddrbin_tool. 531 532### Fixed 533 534| Index | Severity | Update | Issue description | Issue source | 535| ----- | --------- | ---------------------------------------- | ------------------------------------------------------------ | ------------ | 536| 1 | important | Fix WRTRN Bug | Fix WRTRN bug when ddr freq between 533MHz - 1066MHz | - | 537| 2 | important | Fix ZQCALIB bug | Increase auto ZQCALIB command period to 470ms | - | 538| 3 | important | Fix 528M bug | 528MHz undo RDTRN, SW*skew should be clean before clean before switch to 528MHz. | - | 539| 4 | important | Improve LPDDR5 stability and performance | Fix some LPDDR5 timing like rd2wr,wr2rd and hash config to improve stability and performance. | - | 540| 5 | important | LP4/LP4x support 32GB cap | LP4/LP4x support 32GB cap | - | 541 542------ 543 544## rk3588_bl31_v1.31.elf 545 546| Date | File | Build commit | Severity | 547| ---------- | :-------------------- | ------------ | --------- | 548| 2022-11-09 | rk3588_bl31_v1.31.elf | 91e396185 | important | 549 550### New 551 5521. Enable RK_ENABLE_A76_L2_FLUSH_TO_L3 function. 5532. Support amp function. 554 555### Fixed 556 557| Index | Severity | Update | Issue description | Issue source | 558| ----- | --------- | ------------------------------------------------------------ | ----------------- | ------------ | 559| 1 | important | Save/restore some performance setting in system suspend/resume | - | - | 560 561------ 562 563## rk3588_bl31_v1.30.elf 564 565| Date | File | Build commit | Severity | 566| ---------- | :-------------------- | ------------ | --------- | 567| 2022-10-12 | rk3588_bl31_v1.30.elf | 1450d21e8 | important | 568 569### New 570 5711. Support pstore. 572 573------ 574 575## rk3588_bl31_v1.29.elf 576 577| Date | File | Build commit | Severity | 578| ---------- | :-------------------- | ----------- | --------- | 579| 2022-09-29 | rk3588_bl31_v1.29.elf | 686b5c48b | important | 580 581### New 582 5831. Add A55 AT speculative patches. 5842. Add LPDDR5 DFS patches, support DFS between rows. 5853. Config FW-DSU region according to the specific DDR channel. 586 587### Fixed 588 589| Index | Severity | Update | Issue description | Issue source | 590| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 591| 1 | important | Fix problem about CEC wakeup. | When waiting for CEC wakeup source in system suspend, gpio1/3 irq will wakeup both AP and mcu . | - | 592| 2 | important | Fix configuration about ddr. | Fix ddr-unstable problem. | - | 593| 3 | important | Fix problem in system suspend if disable uart. | If loader disable uart, system suspend will panic. | - | 594 595------ 596 597## rk3588_bl32_v1.12.bin 598 599| Date | File | Build commit | Severity | 600| ---------- | :-------------------- | ------------ | --------- | 601| 2022-09-20 | rk3588_bl32_v1.12.bin | 4542e1efd | important | 602 603### New 604 6051. Config FW-DSU region according to the specific DDR channel. 606 607------ 608 609## rk3588_bl32_v1.11.bin 610 611| Date | File | Build commit | Severity | 612| ---------- | :-------------------- | ------------ | --------- | 613| 2022-09-15 | rk3588_bl32_v1.11.bin | d84087907 | important | 614 615### Fixed 616 617| Index | Severity | Update | Issue description | Issue source | 618| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | 619| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - | 620 621------ 622 623