xref: /rkbin/doc/release/RK3576_EN.md (revision 69bc9afdef1a15e06c1bd4238fc109bca3b3479a)
1# RK3576 Release Note
2
3## rk3576_spl_v1.08.bin
4
5| Date       | File                  | Build commit | Severity  |
6| ---------- | :----------------------- | ----------- | -------- |
7| 2025-06-09 | rk3576_spl_v1.08.bin | 60e6e79d7a0   | important     |
8
9### New
10
111. Modify load address of spl bin.
122. Add sdmmc pinctrl support.
13
14------
15
16## rk3576_bl31_v1.20.elf
17
18| Date       | File                  | Build commit | Severity  |
19| ---------- | :-------------------- | ------------ | --------- |
20| 2025-05-13 | rk3576_bl31_v1.20.elf | 4d7e811c6 | important |
21
22### New
23
241. Change the base address of BL31 to 0x60000.
252. Enhance the stability of system reboot.
26
27------
28
29## rk3576_bl32_v1.06.bin
30
31| Date       | File                  | Build commit | Severity  |
32| ---------- | :-------------------- | ------------ | --------- |
33| 2025-05-12 | rk3576_bl32_v1.06.bin | 667b54418    | important |
34
35### New
36
371. Add support for verify config ip.
382. Add OEM OTP KEY hmac support for user ta.
39
40### Fixed
41
42| Index | Severity  | Update                                                   | Issue description                                     | Issue source |
43| ----- | --------- | -------------------------------------------------------- | ----------------------------------------------------- | ------------ |
44| 1     | important | Merge official security patches                          | Address potential security risks                      | -            |
45| 2     | important | Support automatic file recovery after abnormal power off | Abnormal power off causes user ta cannot run normally | 517988       |
46
47------
48
49## rk3576_bl31_v1.19.elf
50
51| Date       | File                  | Build commit | Severity  |
52| ---------- | :-------------------- | ------------ | --------- |
53| 2025-03-21 | rk3576_bl31_v1.19.elf | f3570ca5d | important |
54
55### New
56
571. Enhanced usb1 stability for rk3576_s1.
58
59------
60
61## rk3576_bl31_v1.18.elf
62
63| Date       | File                  | Build commit | Severity  |
64| ---------- | :-------------------- | ------------ | --------- |
65| 2025-03-14 | rk3576_bl31_v1.18.elf | b072a1255 | important |
66
67### New
68
691. Supports SCU1_AUTO_PD function to be enabled dynamically.
702. Supports panic and wdt reset under MOS.
71
72------
73
74## rk3576_bl31_v1.17.elf
75
76| Date       | File                  | Build commit | Severity  |
77| ---------- | :-------------------- | ------------ | --------- |
78| 2025-03-03 | rk3576_bl31_v1.17.elf | 70d3deb59    | important |
79
80### New
81
821. Support to configure gpio-group.
832. Reduce the BL31 firmware size..
84
85------
86
87## rk3576_bl31_v1.16.elf
88
89| Date       | File                  | Build commit | Severity  |
90| ---------- | :-------------------- | ------------ | --------- |
91| 2025-02-13 | rk3576_bl31_v1.16.elf | fab0f0345    | important |
92
93### New
94
951. Optimize speed of system resume.
962. Optimize the flow of detecting  external 32k clock.
97
98------
99
100## rk3576_boost_v1.03.bin
101
102| Date       | File                  | Build commit | Severity  |
103| ---------- | :-------------------- | ----------- | -------- |
104| 2025-01-24 | rk3576_boost_v1.03.bin | 8a55316839   | moderate |
105
106### Fixed
107
108| Index | Severity  | Update                  | Issue description                    | Issue source |
109| ----- | --------- | ----------------------- | ------------------------------------ | ------------ |
110| 1     | moderate | accelerate UFS boot speed. | The boot speed of UFS is relatively slow. | -            |
111
112------
113
114## rk3576_bl31_v1.15.elf
115
116| Date       | File                  | Build commit | Severity  |
117| ---------- | :-------------------- | ------------ | --------- |
118| 2025-01-03 | rk3576_bl31_v1.15.elf | bf841fed1    | important |
119
120### New
121
1221. Support dual system.
1232. Support wake source after virtual-poweroff.
1243. Enhanced otp stability after ultra sleep.
125
126------
127
128## rk3576_bl31_v1.14.elf
129
130| Date       | File                  | Build commit | Severity  |
131| ---------- | :-------------------- | ------------ | --------- |
132| 2024-11-08 | rk3576_bl31_v1.14.elf | c481e5368    | important |
133
134### New
135
1361. Support RK3576 j/m.
1372. Support reset arch timer after system resume.
138
139------
140
141## rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,_eyescan}_v1.09.bin
142
143| Date       | File                                                          | Build commit | Severity  |
144| ---------- | :------------------------------------------------------------ | ------------ | --------- |
145| 2024-11-07 | rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,_eyescan}_v1.09.bin | 2f85f4b2d4   | important |
146
147### New
148
1491. Add support RK3576J and RK3576M.
1502. Optimize DDR performance.
1513. Hptimer support 1G frequency.
152
153------
154
155## rk3576_usbplug_v1.04.bin
156
157| Date       | File                  | Build commit | Severity  |
158| ---------- | :-------------------- | ------------ | --------- |
159| 2024-11-07 | rk3576_usbplug_v1.04.bin | 13ceb2afdcb | important     |
160
161### Fixed
162
163| Index | Severity  | Update                                                       | Issue description                                            | Issue source |
164| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ |
165| 1     | important | Add 1Ghz arch timer support, and usbplug is adjusted to get current arch timer frequency from preloader by default. | Delay in usbplug is inaccurate. | -            |
166
167------
168
169## rk3576_spl_v1.07.bin
170
171| Date       | File                  | Build commit | Severity  |
172| ---------- | :-------------------- | ------------ | --------- |
173| 2024-11-07 | rk3576_spl_v1.07.bin | 13ceb2afdcb | important     |
174
175### Fixed
176
177| Index | Severity  | Update                                                       | Issue description                                            | Issue source |
178| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ |
179| 1     | important | Add 1Ghz arch timer support, and SPL is adjusted to get current arch timer frequency from preloader by default. | Delay in SPL is inaccurate, and time print at the end is inaccurate too. | -            |
180
181------
182
183## rk3576_bl32_v1.05.bin
184
185| Date       | File                  | Build commit | Severity  |
186| ---------- | :-------------------- | ------------ | --------- |
187| 2024-11-01 | rk3576_bl32_v1.05.bin | 9f2aca7d1    | important |
188
189### Fixed
190
191| Index | Severity  | Update                                                       | Issue description                                            | Issue source |
192| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ |
193| 1     | important | check whether the rpmb key has been burned before changing security level | upgrading from weak security level to strong security level may result in rpmb key verification failure | -            |
194| 2     | important | fixed RSA OAEP MGF1 algorithm                                | TA will report an error when using RSA algorithm OAEP MGF1 padding method | -            |
195| 3     | important | fixed condition of whether secure boot is enabled            | Under unstable hardware conditions, it may be mistakenly believed that secure boot is enabled | -            |
196
197------
198
199## rk3576_bl31_v1.13.elf
200
201| Date       | File                  | Build commit | Severity  |
202| ---------- | :-------------------- | ------------ | --------- |
203| 2024-10-31 | rk3576_bl31_v1.13.elf | b21ffefc7    | important |
204
205### New
206
2071. Add control for PLDO2 in the system suspend/resume.
208
209------
210
211## rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,_eyescan}_v1.08.bin
212
213| Date       | File                                                          | Build commit | Severity  |
214| ---------- | :------------------------------------------------------------ | ------------ | --------- |
215| 2024-10-09 | rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,_eyescan}_v1.08.bin | fcb0cfd52f   | important |
216
217### New
218
2191. Add support RK3576S.
220
221------
222
223## rk3576_bl31_v1.12.elf
224
225| Date       | File                  | Build commit | Severity  |
226| ---------- | :-------------------- | ------------ | --------- |
227| 2024-10-09 | rk3576_bl31_v1.12.elf | 2535b79ce    | important |
228
229### New
230
2311. Support fast-boot.
2322. Support RK3576S1.
233
234------
235
236## rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,_eyescan}_v1.07.bin
237
238| Date       | File                                                         | Build commit | Severity  |
239| ---------- | :----------------------------------------------------------- | ------------ | --------- |
240| 2024-09-26 | rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,_eyescan}_v1.07.bin | 584efc13bf   | important |
241
242### New
243
2441. Enable dvfs/periodic training in loader.
245
246### Fixed
247
248| Index | Severity  | Update                                          | Issue description                                            | Issue source |
249| ----- | --------- | ----------------------------------------------- | ------------------------------------------------------------ | ------------ |
250| 1     | important | Fix rd_dqs_vref_training                        | A few chips rd_dqs_vref_training results may be unreasonable, resulting in abnormal DDR | -            |
251| 2     | important | Fix LPDDR5 ultra suspend resume failure issue   | -                                                            | -            |
252| 3     | moderate  | Update the criteria of the eye scan result pass | -                                                            | -            |
253
254------
255
256## rk3576_usbplug_fspi1_v1.03.bin
257
258| Date       | File                  | Build commit | Severity  |
259| ---------- | :----------------------- | ----------- | -------- |
260| 2024-09-18 | rk3576_usbplug_fspi1_v1.03.bin | 4546bd092ab5 | important     |
261
262### New
263
2641. Support GPT bakcup.
265
266------
267
268## rk3576_bl31_v1.11.elf
269
270| Date       | File                  | Build commit | Severity  |
271| ---------- | :-------------------- | ------------ | --------- |
272| 2024-09-21 | rk3576_bl31_v1.11.elf | 5ed489867    | important |
273
274### New
275
2761. Support non-CPU0 interrupt wake up when system suspend.
2772. Pull up pmu_sleep pin1 by default when system suspend.
2783. Support AMP OS.
279
280------
281
282## rk3576_spl_v1.06.bin
283
284| Date       | File                  | Build commit | Severity  |
285| ---------- | :----------------------- | ----------- | -------- |
286| 2024-09-13 | rk3576_spl_v1.06.bin | 8532be3569c   | important     |
287
288### New
289
2901. Modify the erase protection function, and vendor storage data can also be erased.
2912. Modify the MPHY power supply judgment to solve some UFS support exception issues.
2923. Add CRU reset to the controller to solve individual UFS initialization issues.
293
294------
295
296## rk3576_usbplug_v1.03.bin
297
298| Date        | File                     | Build commit | Severity  |
299| ----------- | :----------------------- | ------------ | --------- |
300| 2024-09-013 | rk3576_usbplug_v1.03.bin | 8532be356    | important |
301
302### New
303
3041. Modify the erase protection function, and vendor storage data can also be erased.
3052. Modify the MPHY power supply judgment to solve some UFS support exception issues.
3063. Add CRU reset to the controller to solve individual UFS initialization issues.
307
308------
309
310## rk3576_bl32_v1.04.bin
311
312| Date       | File                  | Build commit | Severity  |
313| ---------- | :-------------------- | ------------ | --------- |
314| 2024-09-02 | rk3576_bl32_v1.04.bin | 6c78a7d8c    | important |
315
316### New
317
3181. Supports reading and writing OTP data for Non Protected OEM Zone.
3192. Support software TA encryption key, customers can use TA encryption function without burning the key.
320
321------
322
323## rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,_eyescan}_v1.06.bin
324
325| Date       | File                                                         | Build commit | Severity  |
326| ---------- | :----------------------------------------------------------- | ------------ | --------- |
327| 2024-07-27 | rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,_eyescan}_v1.06.bin | a6303af65c   | important |
328
329### New
330
3311. Support x16, x8 die mixed package LPDDR4(X).
3322. Add JEDEC Rx Mask for eyescan.
333
334### Fixed
335
336| Index | Severity  | Update                                                 | Issue description                                            | Issue source |
337| ----- | --------- | ------------------------------------------------------ | ------------------------------------------------------------ | ------------ |
338| 1     | important | Optimize LPDDR5 stability                              | -                                                            | -            |
339| 2     | important | Fix ultra suspend low probability resume failure issue | ultra suspend resume fails with a low probability            | -            |
340| 3     | moderate  | Optimize uart printing speed                           | -                                                            | -            |
341| 4     | moderate  | Increased force jtag time to 1 second                  | Individual boards with problematic uart hardware design will be switched to jtag mode | -            |
342
343------
344
345## rk3576_bl32_v1.03.bin
346
347| Date       | File                  | Build commit | Severity  |
348| ---------- | :-------------------- | ------------ | --------- |
349| 2024-07-22 | rk3576_bl32_v1.03.bin | 1bfd9b503    | important |
350
351### New
352
3531. Support block reading of RPMB data.
3542. Close Keylad function for get otp zero count.
355
356------
357
358## rk3576_bl31_v1.10.elf
359
360| Date       | File                  | Build commit | Severity  |
361| ---------- | :-------------------- | ------------ | --------- |
362| 2024-07-20 | rk3576_bl31_v1.10.elf | 6130bb51a    | important |
363
364### New
365
3661. Support gpio0 debounce interrupt wake up when system suspend.
3672. Support access mem_os_reg.
3683. Save global reset status in mem_os_reg.
369
370------
371
372## rk3576_bl31_v1.09.elf
373
374| Date       | File                  | Build commit | Severity  |
375| ---------- | :-------------------- | ------------ | --------- |
376| 2024-06-28 | rk3576_bl31_v1.09.elf | 286c013b2    | important |
377
378### New
379
3801. Support to close VDD_CPU_BIG.
3812. Support 1G frequency of cpu timer.
3823. Support for reducing length.
383
384------
385
386## rk3576_spl_v1.05.bin
387
388| Date       | File                  | Build commit | Severity  |
389| ---------- | :----------------------- | ----------- | -------- |
390| 2024-06-19 | rk3576_spl_v1.05.bin | 884f049582f   | important     |
391
392### Fixed
393
394| Index | Severity  | Update                  | Issue description                    | Issue source |
395| ----- | --------- | ----------------------- | ------------------------------------ | ------------ |
396| 1     | important     | Add write maskrom flag to OS_REG0 support | SPL will now write OS_REG0 to enter maskrom mode. | -        |
397
398------
399
400## rk3576_{usbplug,usbplug_fspi1}_v1.02.bin
401
402| Date       | File                  | Build commit | Severity  |
403| ---------- | :----------------------- | ----------- | -------- |
404| 2024-06-19 | rk3576_{usbplug,usbplug_fspi1}_v1.02.bin | 0fe85c2474 | important     |
405
406### Fixed
407
408| Index | Severity  | Update                  | Issue description                    | Issue source |
409| ----- | --------- | ----------------------- | ------------------------------------ | ------------ |
410| 1     | important     | Add clear OS_REG0 support | SPL will write OS_REG0 to enter maskrom mode, usbplug needs to clear the maskrom flag accordingly. | -        |
411
412------
413
414## rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,eyescan}_v1.05.bin
415
416| Date       | File                                                         | Build commit | Severity  |
417| ---------- | :----------------------------------------------------------- | ------------ | --------- |
418| 2024-06-17 | rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,eyescan}_v1.05.bin | da1087e33f   | important |
419
420### New
421
4221. Supports dram whose cs0 row is less than cs1 row.
4232. Add eyescan DDR bin.
424
425### Fixed
426
427| Index | Severity  | Update                                            | Issue description                             | Issue source |
428| ----- | --------- | ------------------------------------------------- | --------------------------------------------- | ------------ |
429| 1     | important | Ensure VOP bandwidth in extreme situations        | -                                             | -            |
430| 2     | important | Fix probabilistic failure to detect LPDDR4(X) CS1 | Probabilistic failure to detect LPDDR4(X) CS1 | -            |
431
432------
433
434## rk3576_bl31_v1.08.elf
435
436| Date       | File                  | Build commit | Severity  |
437| ---------- | :-------------------- | ------------ | --------- |
438| 2024-06-07 | rk3576_bl31_v1.08.elf | 6102c2d62    | important |
439
440### New
441
4421. Support rbrom command in UFS machines.
4432. Enable memory repair according to otp.
444
445------
446
447## rk3576_bl31_v1.07.elf
448
449| Date       | File                  | Build commit | Severity  |
450| ---------- | :-------------------- | ------------ | --------- |
451| 2024-05-29 | rk3576_bl31_v1.07.elf | d6d387faa    | important |
452
453### New
454
4551. Support power off vdd_logic when virtual-poweroff.
4562. Support to configure bus_mcu in NS.
4573. Improve DDR stability when ultra suspend.
4584. Support DFS in VOP+EBC machine.
459
460------
461
462## rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,eyescan}_v1.04.bin
463
464| Date       | File                                                         | Build commit | Severity  |
465| ---------- | :----------------------------------------------------------- | ------------ | --------- |
466| 2024-05-28 | rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra,eyescan}_v1.04.bin | 27ded95582   | important |
467
468### New
469
4701. Supports dram whose cs0 row is less than cs1 row.
4712. Add eyescan DDR bin.
472
473### Fixed
474
475| Index | Severity  | Update                                                    | Issue description | Issue source |
476| ----- | --------- | --------------------------------------------------------- | ----------------- | ------------ |
477| 1     | important | Fix an issue with some LPDDR5 read eye skewed to the left | -                 | -            |
478| 2     | important | Improve LPDDR5 534MHz high temperature stability          | -                 | -            |
479| 3     | important | Improve ultra suspend stability                           | -                 | -            |
480| 4     | important | Improve reboot stability                                  | -                 | -            |
481| 5     | moderate  | Improve print result of eye scan                          | -                 | -            |
482
483------
484
485## rk3576_boost_v1.02.bin
486
487| Date       | File                  | Build commit | Severity  |
488| ---------- | :-------------------- | ----------- | -------- |
489| 2024-05-25 | rk3576_boost_v1.02.bin | 85a3a9ac98   | moderate |
490
491### Fixed
492
493| Index | Severity  | Update                  | Issue description                    | Issue source |
494| ----- | --------- | ----------------------- | ------------------------------------ | ------------ |
495| 1     | moderate | Close uart print | If baud rate is not 1500000,it will print garbled text. | -            |
496
497------
498
499## rk3576_spl_v1.04.bin
500
501| Date       | File                  | Build commit | Severity  |
502| ---------- | :-------------------- | ------------ | --------- |
503| 2024-05-17 | rk3576_spl_v1.04.bin | 3e169ed6d1d    | important |
504
505### Fixed
506
507| Index | Severity  | Update                                         | Issue description                    | Issue source |
508| ----- | --------- | ---------------------------------------------- | ------------------------------------ | ------------ |
509| 1     | important | When bootrom boot from sd card, fail at SPL stage | SD card power-off mechanism in SPL exists problem | -            |
510
511------
512
513## rk3576_bl31_v1.06.elf
514
515| Date       | File                  | Build commit | Severity  |
516| ---------- | :-------------------- | ------------ | --------- |
517| 2024-05-16 | rk3576_bl31_v1.06.elf | a2ba6bc7c    | important |
518
519### New
520
5211. Print global reset status.
5222. Support suspend from any cpu.
523
524------
525
526## rk3576_bl32_v1.02.bin
527
528| Date       | File                  | Build commit | Severity  |
529| ---------- | :-------------------- | ------------ | --------- |
530| 2024-05-13 | rk3576_bl32_v1.02.bin | b90c1680e    | important |
531
532### New
533
5341. Support read write verify toybrick ksn.
535
536------
537
538## rk3576_spl_v1.03.bin
539
540| Date       | File                  | Build commit | Severity  |
541| ---------- | :-------------------- | ------------ | --------- |
542| 2024-04-30 | rk3576_spl_v1.03.bin | e53b21c53e6    | important |
543
544### Fixed
545
546| Index | Severity  | Update                                         | Issue description                    | Issue source |
547| ----- | --------- | ---------------------------------------------- | ------------------------------------ | ------------ |
548| 1     | important | Fix GPT problem caused by different blocksizes of TF card and UFS device | Invalid GPT error happens | -            |
549
550------
551
552## rk3576_bl31_v1.05.elf
553
554| Date       | File                  | Build commit | Severity  |
555| ---------- | :-------------------- | ------------ | --------- |
556| 2024-04-24 | rk3576_bl31_v1.05.elf | 76e9c9f54    | important |
557
558### New
559
5601. Enable pd_gpu repair.
5612. Add otp init.
5623. Increase pvptll length for middle frequencies.
5634. Adjust pvtpll table by otp opp info.
5645. Hptimer support 1G frequency.
5656. Don't use cpu unclean src.
566
567### Fixed
568
569| Index | Severity  | Update                                         | Issue description                    | Issue source |
570| ----- | --------- | ---------------------------------------------- | ------------------------------------ | ------------ |
571| 1     | important | Fix cpu frequecy error when suspend and resume | System crash when suspend and resume | -            |
572
573------
574
575## rk3576_boost_v1.00.bin
576
577| Date       | File                  | Build commit | Severity  |
578| ---------- | :-------------------- | ----------- | -------- |
579| 2024-04-23 | rk3576_boost_v1.00.bin | d4affbeb09   | important |
580
581### Fixed
582
583| Index | Severity  | Update                  | Issue description                    | Issue source |
584| ----- | --------- | ----------------------- | ------------------------------------ | ------------ |
585| 1     | important | Fixed SD card boot fail | BootROM load ddr.bin fail in SD card | -            |
586
587------
588
589## rk3576_spl_v1.02.bin
590
591| Date       | File                  | Build commit | Severity  |
592| ---------- | :-------------------- | ----------- | -------- |
593| 2024-04-19 | rk3576_spl_v1.02.bin | 57b8ceed1c3   | important |
594
595### New
596
5971. Enable cci channels for devices.
5982. Add internal phase support for dwmmc.
5993. Enable decom by default.
6004. Add eMMC and FSPI iomux support.
6015. Improve UFS support.
6026. Improve usbplug support.
603
604------
605
606## rk3576_bl31_v1.04.elf
607
608| Date       | File                  | Build commit | Severity  |
609| ---------- | :-------------------- | ------------ | --------- |
610| 2024-04-16 | rk3576_bl31_v1.04.elf | 30018b771    | important |
611
612### New
613
6141. Reduced power consumption of the pmu 1v8 during sleep.
615
616### Fixed
617
618| Index | Severity  | Update                                         | Issue description                             | Issue source |
619| ----- | --------- | ---------------------------------------------- | --------------------------------------------- | ------------ |
620| 1     | important | Fixed GPU performance deteriorates after sleep | GPU performance will deteriorates after sleep | -            |
621
622------
623
624## rk3576_usbplug_v1.01.bin
625
626| Date       | File                     | Build commit | Severity  |
627| ---------- | :----------------------- | ------------ | --------- |
628| 2024-04-17 | rk3576_usbplug_v1.01.bin | fa96a41a6    | important |
629
630### New
631
6321. Add support write booster.
633
634### Fixed
635
636| Index | Severity  | Update                                              | Issue description                                          | Issue source |
637| ----- | --------- | --------------------------------------------------- | ---------------------------------------------------------- | ------------ |
638| 1     | important | Poll for max. 1500ms for fDeviceInit flag to clear. | The timeout is too short, and UFS initialization may fail. | -            |
639| 2     | important | Support UFS with PHISON UFS controller.             | Test ready command will fail.                              | -            |
640
641------
642
643## rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra}_v1.03.bin
644
645| Date       | File                                                 | Build commit | Severity  |
646| ---------- | :--------------------------------------------------- | ------------ | --------- |
647| 2024-04-16 | rk3576_ddr_lp4_2112MHz_lp5_2736MHz{_ultra}_v1.03.bin | 81dd75088a   | important |
648
649### Warn
650
6511. When LPDDR5 is used, the kernel must have this patch: 540126c8642b arm64: dts: rockchip: Increase 2400M to 2750M for dmc opp table (commit ID may be different for different kernel branches).
652
653### Fixed
654
655| Index | Severity  | Update                                          | Issue description                            | Issue source |
656| ----- | --------- | ----------------------------------------------- | -------------------------------------------- | ------------ |
657| 1     | important | Change default freq of LPDDR5 to 2736MHz        | -                                            | -            |
658| 2     | important | Change trigger time of force uart rx to smaller | uart may not automatically trigger jtag mode | -            |
659
660------
661
662## rk3576_bl32_v1.01.bin
663
664| Date       | File                  | Build commit | Severity  |
665| ---------- | :-------------------- | ------------ | --------- |
666| 2024-04-16 | rk3576_bl32_v1.01.bin | 185dc3c92    | important |
667
668### New
669
6701. Optimization parameter check to enhance security.
6712. Keylad supports get otp zero count.
672
673------
674
675## rk3576_bl31_v1.03.elf
676
677| Date       | File                  | Build commit | Severity  |
678| ---------- | :-------------------- | ------------ | --------- |
679| 2024-04-10 | rk3576_bl31_v1.03.elf | 9de33eca3    | important |
680
681### New
682
6831. Improve DDR stability when sleep.
6842. Supports DDR frequency conversion in EBC scenarios.
685
686### Fixed
687
688| Index | Severity  | Update                                         | Issue description                             | Issue source |
689| ----- | --------- | ---------------------------------------------- | --------------------------------------------- | ------------ |
690| 1     | important | Fixed CPU performance deteriorates after sleep | CPU performance will deteriorates after sleep | -            |
691
692------
693
694## rk3576_{spl,usbplug}_fspi1_v1.00.bin
695
696| Date       | File                  | Build commit | Severity  |
697| ---------- | :-------------------- | ----------- | -------- |
698| 2024-04-08 | rk3576_{spl,usbplug}_fspi1_v1.00.bin | 38fed2d628d   | important |
699
700### New
701
7021. Support fspi1 spiflash.
703
704------
705
706## rk3576_spl_v1.01.bin
707
708| Date       | File                  | Build commit | Severity  |
709| ---------- | :-------------------- | ----------- | -------- |
710| 2024-04-07 | rk3576_spl_v1.01.bin | 4a69562ca69   | important |
711
712### New
713
7141. Support SD card.
7152. Support SecureBoot.
7163. Enable crypto.
7174. Improve UFS support.
7185. Improve VOP2 support.
7196. Add MCU-related register configuration.
720
721------
722
723## rk3576_bl31_v1.02.elf
724
725| Date       | File                  | Build commit | Severity  |
726| ---------- | :-------------------- | ------------ | --------- |
727| 2024-03-29 | rk3576_bl31_v1.02.elf | 5784c4ac0    | important |
728
729### New
730
7311. Support HDCP.
7322. Enable GPU counter.
733
734------
735
736## rk3576_ddr_lp4_2112MHz_lp5_2376MHz_v1.02.bin
737
738| Date       | File                                         | Build commit | Severity  |
739| ---------- | :------------------------------------------- | ------------ | --------- |
740| 2024-03-22 | rk3576_ddr_lp4_2112MHz_lp5_2376MHz_v1.02.bin | 2e0089635a3  | important |
741
742### Fixed
743
744| Index | Severity  | Update                                   | Issue description                                                                                                                             | Issue source |
745| ----- | --------- | ---------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------- | ------------ |
746| 1     | important | Fixed VOP will flash with POST_BUF_EMPTY | When DDR is under heavy load, or DDR frequency is low, especially when GPU and RKNN are under heavy load, VOP will flash with POST_BUF_EMPTY. | -            |
747
748------
749
750## rk3576_bl31_v1.01.elf
751
752| Date       | File                  | Build commit | Severity  |
753| ---------- | :-------------------- | ------------ | --------- |
754| 2024-03-21 | rk3576_bl31_v1.01.elf | c87ba612c    | important |
755
756### New
757
7581. Support suspend/resume in uboot.
7592. Support virtual poweroff.
7603. Support recover system time after system resume.
761
762------
763
764## rk3576_{ddr,spl,usbplug}_v1.00.bin
765
766| Date       | File                               | Build commit                                   | Severity |
767| ---------- | :--------------------------------- | ---------------------------------------------- | -------- |
768| 2024-03-15 | rk3576_{ddr,spl,usbplug}_v1.00.bin | ddr:563d6071c0#spl:0aca89f21:usbplug:0aca89f21 | moderate |
769
770### New
771
7721. Initial version.
773
774------
775
776## rk3576_{bl31, bl32}_v1.00.bin
777
778| Date       | File                  | Build commit | Severity  |
779| ---------- | :-------------------- | ------------ | --------- |
780| 2024-03-15 | rk3576_{bl31, bl32}_v1.00.bin | bl31:a83ab541f#bl32:68cdaabd4 | moderate |
781
782### New
783
7841. Initial version.
785
786------
787
788