xref: /rkbin/doc/release/RK3528_EN.md (revision f7909cbb5d1b9d12475a3c4b403e0055f8ff8ba0)
1# RK3528 Release Note
2
3## rk3528_ddr_1056MHz_{2L_PCB,4BIT_PCB_}v1.06.bin
4
5| Date       | File                                           | Build commit | Severity  |
6| ---------- | ---------------------------------------------- | ------------ | --------- |
7| 2023-06-05 | rk3528_ddr_1056MHz_{2L_PCB,4BIT_PCB_}v1.06.bin | 1ab0bfbe2d   | important |
8
9### New
10
111. Support modified CA de-skew by ddrbin_tool.
12
13------
14
15## rk3528_bl31_v1.14.elf
16
17| Date       | File                  | Build commit | Severity  |
18| ---------- | :-------------------- | ------------ | --------- |
19| 2023-05-19 | rk3528_bl31_v1.14.elf | 1b2124ab7    | important |
20
21### New
22
231. Move  BL31 base to 0x80000.
242. Support ddr frequency scale.
25
26------
27
28## rk3528_ddr_1056MHz_{2L_PCB,4BIT_PCB_}v1.05.bin
29
30| Date       | File                                           | Build commit | Severity  |
31| ---------- | ---------------------------------------------- | ------------ | --------- |
32| 2023-04-14 | rk3528_ddr_1056MHz_{2L_PCB,4BIT_PCB_}v1.05.bin | 2eef4a672d   | important |
33
34### New
35
361. Add new ddrbin  for 4BIT PCB configurations.
372. Add the configuration of LP3 CA skew.
38
39### Fixed
40
41| Index | Severity  | Update                                                       | Issue description                                            | Issue source |
42| ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ |
43| 1     | important | Fix the phase problem of DDR3 RAS in 2T mode.                | Abnormal RAS phase in DDR3 2T mode.                          | -            |
44| 2     | important | Fixed the abnormal ODT output problem in LP3 training under multi-rank. | The ODT output is abnormal when LP3 does cs1 write training under multi-rank. | -            |
45
46------
47
48## rk3528_bl32_v1.02.bin
49
50| Date       | File                  | Build commit | Severity  |
51| ---------- | :-------------------- | ------------ | --------- |
52| 2023-04-12 | rk3528_bl32_v1.02.bin | c73fd5531    | important |
53
54### New
55
561. Added crypto/trng/keylad module support.
57
58------
59
60## rk3528_bl31_v1.13.elf
61
62| Date       | File                  | Build commit | Severity  |
63| ---------- | :-------------------- | ------------ | --------- |
64| 2023-04-12 | rk3528_bl31_v1.13.elf | 642369d9b    | important |
65
66### New
67
681. Modify pvtpll table for cpu and gpu.
69
70------
71
72## rk3528_spl_v1.04.bin
73
74| Date       | File                 | Build commit | Severity  |
75| ---------- | :----------------- - | ------------ | --------- |
76| 2023-04-11 | rk3528_spl_v1.04.bin | 0fbedd06     | important |
77
78### Fixed
79
80| Index | Severity  | Update                             | Issue description   | Issue source |
81| ----- | --------- | ---------------------------------- | ------------------- | ------------ |
82| 1     | important | Fix matrix 339M freq set/get error | EMMC transfer error | -            |
83
84------
85
86## rk3528_usbplug_v1.03.bin
87
88| Date       | File                  | Build commit | Severity  |
89| ---------- | :----------------------- | ---------- | -------- |
90| 2023-04-08 | rk3528_usbplug_v1.03.bin | dbdfea79b  | important |
91
92### Fixed
93
94| Index | Severity  | Update                 | Issue description                  | Issue source |
95| ----- | --------- | ---------------------- | ------------------------ | ------------ |
96| 1     | important | Fix sometime emmc upgrade fail.        | Emmc upgrade fail sometime.     | -            |
97
98------
99
100## rk3528_bl32_v1.01.bin
101
102| Date       | File                  | Build commit | Severity |
103| ---------- | :-------------------- | ------------ | -------- |
104| 2023-04-03 | rk3528_bl32_v1.01.bin | c5251becc    | moderate |
105
106### New
107
1081. Add some internal TA interface.
109
110------
111
112## rk3528_bl31_v1.12.elf
113
114| Date       | File                  | Build commit | Severity  |
115| ---------- | :-------------------- | ------------ | --------- |
116| 2023-03-16 | rk3528_bl31_v1.12.elf | 70c5c8d9c    | important |
117
118### New
119
1201. Improve trng performance.
121
122------
123
124## rk3528_ddr_1056MHz_{2L_PCB_}v1.04.bin
125
126| Date       | File                                  | Build commit | Severity  |
127| ---------- | ------------------------------------- | ------------ | --------- |
128| 2023-03-15 | rk3528_ddr_1056MHz_{2L_PCB_}v1.04.bin | dce46ffe73   | important |
129
130### New
131
1321. Add new OTP configurations support.
133
134------
135
136## rk3528_bl31_v1.11.elf
137
138| Date       | File                  | Build commit | Severity  |
139| ---------- | :-------------------- | ------------ | --------- |
140| 2023-03-09 | rk3528_bl31_v1.11.elf | 389e6e47     | important |
141
142### New
143
1441. Modify the ddr configuration flow during system suspend.
145
146------
147
148## rk3528_ddr_1056MHz_{2L_PCB_}v1.03.bin
149
150| Date       | File                                  | Build commit | Severity  |
151| ---------- | ------------------------------------- | ------------ | --------- |
152| 2023-03-09 | rk3528_ddr_1056MHz_{2L_PCB_}v1.03.bin | f0be8490c4   | important |
153
154### New
155
1561. Add support for chips with different OTP configurations.
157
158### Fixed
159
160| Index | Severity  | Update                                                | Issue description                                            | Issue source |
161| ----- | --------- | ----------------------------------------------------- | ------------------------------------------------------------ | ------------ |
162| 1     | important | Fixed LP3 x16 capacity error problem.                 | The ddr capacity anomalies occur when the phy at lp3 x16 mode. | -            |
163| 2     | important | Fixed DDR unstabled when in low frequency(<=400Mhz) . | The kernel will panic when DDR run in low frequency(<=400Mhz). | -            |
164
165------
166
167## rk3528_ddr_1056MHz_{2L_PCB_}v1.02.bin
168
169| Date       | File                                  | Build commit | Severity  |
170| ---------- | ------------------------------------- | ------------ | --------- |
171| 2023-02-15 | rk3528_ddr_1056MHz_{2L_PCB_}v1.02.bin | 60403d388d   | important |
172
173### New
174
1751. Support config derate refresh, per-bank refresh.
1762. Support AXI split.
1773. Enable LP4, LP4X read/write DBI function.
178
179### Fixed
180
181| Index | Severity  | Update                                             | Issue description                              | Issue source |
182| ----- | --------- | -------------------------------------------------- | ---------------------------------------------- | ------------ |
183| 1     | important | Fixed 2L PCB unstabled when DDR in high frequency. | The DDR run in 1056MHz will case system panic. | -            |
184
185------
186
187## rk3528_bl31_v1.10.elf
188
189| Date       | File                  | Build commit | Severity  |
190| ---------- | :-------------------- | ------------ | --------- |
191| 2023-02-15 | rk3528_bl31_v1.10.elf | d74b03e10    | important |
192
193### New
194
1951. Add trng scmi clk support.
196
197------
198
199## rk3528_bl31_v1.09.elf
200
201| Date       | File                  | Build commit | Severity  |
202| ---------- | :-------------------- | ------------ | --------- |
203| 2023-02-03 | rk3528_bl31_v1.09.elf | 16574c7f3    | important |
204
205### New
206
2071. Support all gpio wakeup.
2082. Improve the stability of fiq-debugger.
209
210------
211
212## rk3528_bl31_v1.08.elf
213
214| Date       | File                  | Build commit | Severity  |
215| ---------- | :-------------------- | ------------ | --------- |
216| 2023-01-10 | rk3528_bl31_v1.08.elf | 082486b74    | important |
217
218### New
219
2201. Support crypto/crypto_s/klad clock.
221
222------
223
224## rk3528_bl31_v1.07.elf
225
226| Date       | File                  | Build commit | Severity  |
227| ---------- | :-------------------- | ------------ | --------- |
228| 2022-12-26 | rk3528_bl31_v1.07.elf | da191fda0    | important |
229
230### New
231
2321. Support poweroff VDD_LOGIC when system suspend.
2332. Hptimer use soft adjust mode.
2343. Enable PLAT_RK_OPTEED_SYS_CTRL.
235
236------
237
238## rk3528_spl_v1.03.bin
239
240| Date       | File                 | Build commit | Severity |
241| ---------- | :------------------- | ----------- | -------- |
242| 2022-12-14 | rk3528_spl_v1.03.bin | f09ed5ff4f  | important|
243
244### Fixed
245
246| Index | Severity  | Update                 | Issue description                  | Issue source |
247| ----- | --------- | ---------------------- | ---------------------------------- | ------------ |
248| 1     | important | Support HS400ES        | fix HS400 compatibility issues     | -            |
249| 2     | important | config EMMC DS to 1.5X | fix some EMMC compatibility issues | -            |
250
251------
252
253## rk3528_bl31_v1.06.elf
254
255| Date       | File                  | Build commit | Severity  |
256| ---------- | :-------------------- | ------------ | --------- |
257| 2022-12-08 | rk3528_bl31_v1.06.elf | 61102ec13    | important |
258
259### New
260
2611. Support USB wakeup.
262
263------
264
265## rk3528_spl_v1.02.bin
266
267| Date       | File                 | Build commit | Severity  |
268| ---------- | :------------------- | ------------ | --------- |
269| 2022-12-02 | rk3528_spl_v1.02.bin | eee09e1f72   | important |
270
271### Fixed
272
273| Index | Severity  | Update                    | Issue description                                            | Issue source |
274| ----- | --------- | ------------------------- | ------------------------------------------------------------ | ------------ |
275| 1     | important | Fix matrix clk rate error | clk_200m:396000 KHz、clk_300m:594000 KHz、clk_339m:264000 KHz. It may influence storage module. | -            |
276
277------
278
279## rk3528_bl31_v1.05.elf
280
281| Date       | File                  | Build commit | Severity |
282| ---------- | :-------------------- | ------------ | -------- |
283| 2022-12-01 | rk3528_bl31_v1.05.elf | b10341386    | moderate |
284
285### New
286
2871. Add TSP clock support.
288
289------
290
291## rk3528_bl31_v1.04.elf
292
293| Date       | File                  | Build commit | Severity  |
294| ---------- | :-------------------- | ------------ | --------- |
295| 2022-11-30 | rk3528_bl31_v1.04.elf | 63ba7e8e1    | important |
296
297### New
298
2991. Support HDMI wakeup.
300
301------
302
303## rk3528_{ddr,spl,usbplug}_v1.x.bin
304
305| Date       | File                              | Build commit                                | Severity  |
306| ---------- | :-------------------------------- | ------------------------------------------- | --------- |
307| 2022-11-28 | rk3528_{ddr,spl,usbplug}_v1.x.bin | ddr:0799b9b10a#spl:c52427059#usbplug:4eade6 | important |
308
309### New
310
3111. Initial version.
312
313------
314
315## rk3528_{bl31,bl32,mcu}_v1.x.bin
316
317| Date       | File                            | Build commit                              | Severity  |
318| ---------- | :------------------------------ | ----------------------------------------- | --------- |
319| 2022-11-28 | rk3528_{bl31,bl32,mcu}_v1.x.bin | bl31:a1a47bee6#bl32:3c36a5cb#mcu:76d14059 | important |
320
321### New
322
3231. Initial version.
324
325------
326
327