1# 2# (C) Copyright 2000-2011 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# (C) Copyright 2011 6# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com. 7# 8# (C) Copyright 2011 9# Texas Instruments Incorporated - http://www.ti.com/ 10# Aneesh V <aneesh@ti.com> 11# 12# SPDX-License-Identifier: GPL-2.0+ 13# 14# Based on top-level Makefile. 15# 16 17src := $(obj) 18 19# Create output directory if not already present 20_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) 21 22include $(srctree)/scripts/Kbuild.include 23 24-include include/config/auto.conf 25-include $(obj)/include/autoconf.mk 26 27KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD 28ifeq ($(CONFIG_TPL_BUILD),y) 29KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD 30endif 31 32ifeq ($(CONFIG_TPL_BUILD),y) 33SPL_BIN := u-boot-tpl 34else 35SPL_BIN := u-boot-spl 36endif 37 38ifdef CONFIG_SPL_BUILD 39SPL_ := SPL_ 40else 41SPL_ := 42endif 43 44include $(srctree)/config.mk 45include $(srctree)/arch/$(ARCH)/Makefile 46 47# Enable garbage collection of un-used sections for SPL 48KBUILD_CFLAGS += -ffunction-sections -fdata-sections 49LDFLAGS_FINAL += --gc-sections 50 51# FIX ME 52cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 53 $(NOSTDINC_FLAGS) 54c_flags := $(KBUILD_CFLAGS) $(cpp_flags) 55 56HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 57 58libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 59libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 60 61libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ 62libs-y += common/init/ 63 64# Special handling for a few options which support SPL/TPL 65ifeq ($(CONFIG_TPL_BUILD),y) 66libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ 67libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/ 68else 69libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ 70libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ 71endif 72 73libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ 74libs-y += drivers/ 75libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/ 76libs-y += dts/ 77libs-y += fs/ 78libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ 79libs-$(CONFIG_SPL_NET_SUPPORT) += net/ 80 81head-y := $(addprefix $(obj)/,$(head-y)) 82libs-y := $(addprefix $(obj)/,$(libs-y)) 83u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) 84 85libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 86 87# Add GCC lib 88ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 89PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 90PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC) 91endif 92 93u-boot-spl-init := $(head-y) 94u-boot-spl-main := $(libs-y) 95ifdef CONFIG_SPL_OF_PLATDATA 96u-boot-spl-platdata := $(obj)/dts/dt-platdata.o 97endif 98 99# Linker Script 100ifdef CONFIG_SPL_LDSCRIPT 101# need to strip off double quotes 102LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%)) 103endif 104 105ifeq ($(wildcard $(LDSCRIPT)),) 106 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds 107endif 108ifeq ($(wildcard $(LDSCRIPT)),) 109 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds 110endif 111ifeq ($(wildcard $(LDSCRIPT)),) 112 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds 113endif 114ifeq ($(wildcard $(LDSCRIPT)),) 115$(error could not find linker script) 116endif 117 118# Special flags for CPP when processing the linker script. 119# Pass the version down so we can handle backwards compatibility 120# on the fly. 121LDPPFLAGS += \ 122 -include $(srctree)/include/u-boot/u-boot.lds.h \ 123 -include $(objtree)/include/config.h \ 124 -DCPUDIR=$(CPUDIR) \ 125 $(shell $(LD) --version | \ 126 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 127 128MKIMAGEOUTPUT ?= /dev/null 129 130quiet_cmd_mkimage = MKIMAGE $@ 131cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 132 $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT)) 133 134MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE) 135 136MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE) 137 138MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE 139 $(call if_changed,mkimage) 140 141ifeq ($(CONFIG_SYS_SOC),"at91") 142MKIMAGEFLAGS_boot.bin = -T atmelimage 143 144ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y) 145MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params) 146 147boot.bin: $(obj)/../tools/atmel_pmecc_params 148endif 149 150boot.bin: $(obj)/u-boot-spl.bin FORCE 151 $(call if_changed,mkimage) 152else 153ifdef CONFIG_ARCH_ZYNQ 154MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) 155endif 156ifdef CONFIG_ARCH_ZYNQMP 157MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) 158endif 159 160spl/boot.bin: $(obj)/u-boot-spl.bin FORCE 161 $(call if_changed,mkimage) 162endif 163 164ALL-y += $(obj)/$(SPL_BIN).bin 165 166ifdef CONFIG_SAMSUNG 167ALL-y += $(obj)/$(BOARD)-spl.bin 168endif 169 170ifdef CONFIG_ARCH_SOCFPGA 171ALL-y += $(obj)/$(SPL_BIN).sfp 172endif 173 174ifdef CONFIG_ARCH_SUNXI 175ALL-y += $(obj)/sunxi-spl.bin 176endif 177 178ifeq ($(CONFIG_SYS_SOC),"at91") 179ALL-y += boot.bin 180endif 181 182ALL-$(CONFIG_ARCH_ZYNQ) += $(obj)/boot.bin 183ALL-$(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin 184 185all: $(ALL-y) 186 187quiet_cmd_cat = CAT $@ 188cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 189 190quiet_cmd_copy = COPY $@ 191 cmd_copy = cp $< $@ 192 193ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),yy) 194$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \ 195 $(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \ 196 $(obj)/$(SPL_BIN).dtb FORCE 197 $(call if_changed,cat) 198 199$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE 200 $(call if_changed,copy) 201else 202$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE 203 $(call if_changed,copy) 204endif 205 206# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end 207$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN) 208 @bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \ 209 dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null; 210 211# Pass the original device tree file through fdtgrep twice. The first pass 212# removes any unwanted nodes (i.e. those which don't have the 213# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second 214# pass removes various unused properties from the remaining nodes. 215# The output is typically a much smaller device tree file. 216quiet_cmd_fdtgrep = FDTGREP $@ 217 cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \ 218 -n /chosen -O dtb | \ 219 $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \ 220 $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS))) 221 222$(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE 223 $(call if_changed,fdtgrep) 224 225pythonpath = PYTHONPATH=tools 226 227quiet_cmd_dtocc = DTOC C $@ 228cmd_dtocc = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ platdata 229 230quiet_cmd_dtoch = DTOC H $@ 231cmd_dtoch = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ struct 232 233quiet_cmd_plat = PLAT $@ 234cmd_plat = $(CC) $(c_flags) -c $< -o $@ 235 236$(obj)/dts/dt-platdata.o: $(obj)/dts/dt-platdata.c include/generated/dt-structs.h 237 $(call if_changed,plat) 238 239PHONY += dts_dir 240dts_dir: 241 $(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts) 242 243include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir dtoc 244 $(call if_changed,dtoch) 245 246$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir dtoc 247 $(call if_changed,dtocc) 248 249dtoc: #$(objtree)/tools/_libfdt.so 250 251ifdef CONFIG_SAMSUNG 252ifdef CONFIG_VAR_SIZE_SPL 253VAR_SIZE_PARAM = --vs 254else 255VAR_SIZE_PARAM = 256endif 257$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin 258 $(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\ 259 $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\ 260 $(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@ 261endif 262 263quiet_cmd_objcopy = OBJCOPY $@ 264cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 265 266OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary 267 268$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE 269 $(call if_changed,objcopy) 270 271LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL) 272ifneq ($(CONFIG_SPL_TEXT_BASE),) 273LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) 274endif 275 276MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage 277$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE 278 $(call if_changed,mkimage) 279 280quiet_cmd_mksunxiboot = MKSUNXI $@ 281cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@ 282$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE 283 $(call if_changed,mksunxiboot) 284 285# Rule to link u-boot-spl 286# May be overridden by arch/$(ARCH)/config.mk 287quiet_cmd_u-boot-spl ?= LD $@ 288 cmd_u-boot-spl ?= (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ 289 $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \ 290 $(patsubst $(obj)/%,%,$(u-boot-spl-main)) \ 291 $(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \ 292 --end-group \ 293 $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN)) 294 295$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \ 296 $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE 297 $(call if_changed,u-boot-spl) 298 299$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ; 300 301PHONY += $(u-boot-spl-dirs) 302$(u-boot-spl-dirs): $(u-boot-spl-platdata) 303 $(Q)$(MAKE) $(build)=$@ 304 305quiet_cmd_cpp_lds = LDS $@ 306cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 307 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 308 309$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE 310 $(call if_changed_dep,cpp_lds) 311 312# read all saved command lines 313 314targets := $(wildcard $(sort $(targets))) 315cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 316 317ifneq ($(cmd_files),) 318 $(cmd_files): ; # Do not try to update included dependency files 319 include $(cmd_files) 320endif 321 322PHONY += FORCE 323FORCE: 324 325# Declare the contents of the .PHONY variable as phony. We keep that 326# information in a variable so we can use it in if_changed and friends. 327.PHONY: $(PHONY) 328