xref: /rk3399_rockchip-uboot/make.sh (revision 2a3fb7bb049d69d96f3bc7dae8caa756fdc8a613) 
1#!/bin/bash
2#
3# Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
4#
5# SPDX-License-Identifier: GPL-2.0
6#
7
8set -e
9JOB=`sed -n "N;/processor/p" /proc/cpuinfo|wc -l`
10SUPPORT_LIST=`ls configs/*[r,p][x,v,k][0-9][0-9]*_defconfig`
11CMD_ARGS=$1
12
13# @LOADER: map to $RKCHIP_LOADER for loader ini
14# @TRUST:  map to $RKCHIP_TRUST for trust ini
15# @LABEL:  map to $RKCHIP_LEBEL for verbose message
16# @-:      default state/value
17CHIP_TYPE_FIXUP_TABLE=(
18	# CONFIG_XXX                         RKCHIP         LOADER       TRUST         LABEL
19	"CONFIG_ROCKCHIP_RK3368              RK3368H         -            -             -"
20	"CONFIG_ROCKCHIP_RV1108              RV110X          -            -             -"
21	"CONFIG_ROCKCHIP_PX3SE               PX3SE           -            -             -"
22	"CONFIG_ROCKCHIP_RK3126              RK3126          -            -             -"
23	"CONFIG_ROCKCHIP_RK3326              RK3326          -            -             -"
24	"CONFIG_ROCKCHIP_RK3128X             RK3128X         -            -             -"
25	"CONFIG_ROCKCHIP_PX5                 PX5             -            -             -"
26	"CONFIG_ROCKCHIP_RK3399PRO           RK3399PRO       -            -             -"
27	"CONFIG_ROCKCHIP_RK1806              RK1806          -            -             -"
28	"CONFIG_TARGET_GVA_RK3229            RK322X          RK322XAT     -             -"
29	"CONFIG_COPROCESSOR_RK1808           RKNPU-LION      RKNPULION    RKNPULION     -"
30)
31
32# <*> Fixup rsa/sha pack mode for platforms
33#     RSA: RK3308/PX30/RK3326/RK1808 use RSA-PKCS1 V2.1, it's pack magic is "3", and others use default configure.
34#     SHA: RK3368 use rk big endian SHA256, it's pack magic is "2", and others use default configure.
35# <*> Fixup images size pack for platforms
36# <*> Fixup verbose message about AARCH32
37#
38# @RSA:     rsa mode
39# @SHA:     sha mode
40# @A64-KB:  arm64 platform image size: [uboot,trust]
41# @A64-NUM: arm64 platform image number of total: [uboot,trust]
42# @A32-KB:  arm32 platform image size: [uboot,trust]
43# @A32-NUM: arm32 platform image number of total: [uboot,trust]
44# @LOADER:  map to $RKCHIP_LOADER for loader ini
45# @TRUST:   map to $RKCHIP_TRUST for trust ini
46# @-:       default state/value
47CHIP_CFG_FIXUP_TABLE=(
48	# CONFIG_XXX              RSA     SHA     A64-KB      A64-NUM     A32-KB       A32-NUM      LOAER        TRUST
49	"CONFIG_ROCKCHIP_RK3368    -       2       -,-          -,-        -,-          -,-           -           -"
50	"CONFIG_ROCKCHIP_RK3036    -       -       512,512      1,1        -,-          -,-           -           -"
51	"CONFIG_ROCKCHIP_PX30      3       -       -,-          -,-        -,-          -,-           -           -"
52	"CONFIG_ROCKCHIP_RK3326    3       -       -,-          -,-        -,-          -,-           AARCH32     -"
53	"CONFIG_ROCKCHIP_RK3308    3       -       1024,1024    2,2        512,512      2,2           -           AARCH32"
54	"CONFIG_ROCKCHIP_RK1808    3       -       1024,1024    2,2        -,-          -,-           -           -"
55	"CONFIG_ROCKCHIP_RV1126    3       -       -,-          -,-        -,-          -,-           -           -"
56)
57
58########################################### User can modify #############################################
59# User's rkbin tool relative path
60RKBIN_TOOLS=../rkbin/tools
61
62# User's GCC toolchain and relative path
63ADDR2LINE_ARM32=arm-linux-gnueabihf-addr2line
64ADDR2LINE_ARM64=aarch64-linux-gnu-addr2line
65OBJ_ARM32=arm-linux-gnueabihf-objdump
66OBJ_ARM64=aarch64-linux-gnu-objdump
67NM_ARM32=arm-linux-gnueabihf-nm
68NM_ARM64=aarch64-linux-gnu-nm
69GCC_ARM32=arm-linux-gnueabihf-
70GCC_ARM64=aarch64-linux-gnu-
71TOOLCHAIN_ARM32=../prebuilts/gcc/linux-x86/arm/gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf/bin
72TOOLCHAIN_ARM64=../prebuilts/gcc/linux-x86/aarch64/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin
73
74########################################### User not touch #############################################
75# Declare global INI file searching index name for every chip, update in select_chip_info()
76RKCHIP="-"
77RKCHIP_LABEL="-"
78RKCHIP_LOADER="-"
79RKCHIP_TRUST="-"
80
81INI_TRUST=
82INI_LOADER=
83
84# Declare rkbin repository path, updated in prepare()
85RKBIN=
86
87# Declare global toolchain path for CROSS_COMPILE, updated in select_toolchain()
88TOOLCHAIN_GCC=
89TOOLCHAIN_NM=
90TOOLCHAIN_OBJDUMP=
91TOOLCHAIN_ADDR2LINE=
92
93# Declare global plaform configure, updated in fixup_platform_configure()
94PLAT_RSA=
95PLAT_SHA=
96PLAT_UBOOT_SIZE=
97PLAT_TRUST_SIZE=
98PLAT_TYPE="RKFW" # default
99
100SRCTREE=`pwd`
101SCRIPT_FIT="${SRCTREE}/scripts/fit.sh"
102SCRIPT_ATF="${SRCTREE}/scripts/atf.sh"
103SCRIPT_TOS="${SRCTREE}/scripts/tos.sh"
104SCRIPT_SPL="${SRCTREE}/scripts/spl.sh"
105SCRIPT_UBOOT="${SRCTREE}/scripts/uboot.sh"
106SCRIPT_LOADER="${SRCTREE}/scripts/loader.sh"
107
108#########################################################################################################
109function help()
110{
111	echo
112	echo "Usage:"
113	echo "	./make.sh [board|sub-command]"
114	echo
115	echo "	 - board:        board name of defconfig"
116	echo "	 - sub-command:  elf*|loader|trust|uboot|--spl|--tpl|itb|map|sym|<addr>"
117	echo "	 - ini:          ini file to pack trust/loader"
118	echo
119	echo "Output:"
120	echo "	 When board built okay, there are uboot/trust/loader images in current directory"
121	echo
122	echo "Example:"
123	echo
124	echo "1. Build:"
125	echo "	./make.sh evb-rk3399               --- build for evb-rk3399_defconfig"
126	echo "	./make.sh firefly-rk3288           --- build for firefly-rk3288_defconfig"
127	echo "	./make.sh EXT_DTB=rk-kernel.dtb    --- build with exist .config and external dtb"
128	echo "	./make.sh                          --- build with exist .config"
129	echo "	./make.sh env                      --- build envtools"
130	echo
131	echo "2. Pack:"
132	echo "	./make.sh uboot                    --- pack uboot.img"
133	echo "	./make.sh trust                    --- pack trust.img"
134	echo "	./make.sh trust <ini>              --- pack trust img with assigned ini file"
135	echo "	./make.sh loader                   --- pack loader bin"
136	echo "	./make.sh loader <ini>             --- pack loader img with assigned ini file"
137	echo "	./make.sh --spl                    --- pack loader with u-boot-spl.bin"
138	echo "	./make.sh --tpl                    --- pack loader with u-boot-tpl.bin"
139	echo "	./make.sh --tpl --spl              --- pack loader with u-boot-tpl.bin and u-boot-spl.bin"
140	echo
141	echo "3. Debug:"
142	echo "	./make.sh elf                      --- dump elf file with -D(default)"
143	echo "	./make.sh elf-S                    --- dump elf file with -S"
144	echo "	./make.sh elf-d                    --- dump elf file with -d"
145	echo "	./make.sh elf-*                    --- dump elf file with -*"
146	echo "	./make.sh <no reloc_addr>          --- unwind address(no relocated)"
147	echo "	./make.sh <reloc_addr-reloc_off>   --- unwind address(relocated)"
148	echo "	./make.sh map                      --- cat u-boot.map"
149	echo "	./make.sh sym                      --- cat u-boot.sym"
150}
151
152function prepare()
153{
154	if [ -d ${RKBIN_TOOLS} ]; then
155		absolute_path=$(cd `dirname ${RKBIN_TOOLS}`; pwd)
156		RKBIN=${absolute_path}
157	else
158		echo "ERROR: No ../rkbin repository"
159		exit 1
160	fi
161
162	if grep -Eq ''^CONFIG_ARM64=y'|'^CONFIG_ARM64_BOOT_AARCH32=y'' .config ; then
163		ARM64_TRUSTZONE="y"
164	fi
165
166	if grep  -q '^CONFIG_ROCKCHIP_FIT_IMAGE_PACK=y' .config ; then
167		PLAT_TYPE="FIT"
168	fi
169}
170
171function process_args()
172{
173	while [ $# -gt 0 ]; do
174		case $1 in
175			*help|--h|-h)
176				help
177				exit 0
178				;;
179			# '': build with exist .config
180			# loader|trust|uboot: pack image
181			# debug*|map|sym|elf*|nm: debug command
182			# env: build env tool
183			# itb: pack itb image
184			# fit: pack non-secure uboot.img && boot.img
185			''|loader|trust|uboot|debug*|itb|env|fit|map|sym|elf*|nm)
186				if [ "$2" == "spl" -o "$2" == "tpl" ]; then
187					ARG_TSPL=$2
188					shift 1
189				fi
190				shift 1
191				;;
192			# trust/loader ini files for packing trust.img/loader.img
193			*.ini|*.INI)
194				if [ ! -f $1 ]; then
195					echo "ERROR: No $1"
196				fi
197				if grep -q 'CODE471_OPTION' $1 ; then
198					ARG_INI_LOADER=$1
199				elif grep -Eq ''BL31_OPTION'|'TOS'' $1 ; then
200					ARG_INI_TRUST=$1
201				fi
202				shift 1
203				;;
204			--sz-trust) # set trust size
205				ARG_TRUST_SIZE="--size $2 $3"
206				shift 3
207				;;
208			--sz-uboot) # set uboot size
209				ARG_UBOOT_SIZE="--size $2 $3"
210				shift 3
211				;;
212			--no-pack)  # FIT: build but not pack image
213				ARG_NO_PACK="y"
214				shift 1
215				;;
216			--no-uboot) # FIT: pack uboot.img without u-boot
217				ARG_NO_UBOOT="y"
218				shift 1
219				;;
220			--idblock)  # pack idblock.bin
221				shift 1
222				;;
223			--tpl|tpl)  # use tpl file
224				ARG_TPL_BIN="tpl/u-boot-tpl.bin"
225				shift 1
226				;;
227			--spl|spl*) # use spl file
228				ARG_SPL_BIN="spl/u-boot-spl.bin"
229				shift 1
230				;;
231			*)
232				#1. FIT scripts args
233				NUM=$(${SCRIPT_FIT} --arg-check $1)
234				if  [ ${NUM} -ne 0 ]; then
235					[ ${NUM} -eq 1 ] && ARG_LIST_FIT="${ARG_LIST_FIT} $1"
236					[ ${NUM} -eq 2 ] && ARG_LIST_FIT="${ARG_LIST_FIT} $1 $2"
237					shift ${NUM}
238					continue
239				#2. unwind function address
240				elif [ -z $(echo $1 | sed 's/[0-9,a-f,A-F,x,X,-]//g') ]; then
241					ARG_FUNCADDR=$1
242				#3. make defconfig
243				else
244					ARG_BOARD=$1
245					if [ ! -f configs/${ARG_BOARD}_defconfig -a ! -f configs/${ARG_BOARD}.config ]; then
246						echo -e "\n${SUPPORT_LIST}\n"
247						echo "ERROR: No configs/${ARG_BOARD}_defconfig"
248						exit 1
249					elif [ -f configs/${ARG_BOARD}.config ]; then
250						BASE1_DEFCONFIG=`sed -n "/CONFIG_BASE_DEFCONFIG=/s/CONFIG_BASE_DEFCONFIG=//p" configs/${ARG_BOARD}.config |tr -d '\r' | tr -d '"'`
251						BASE0_DEFCONFIG=`sed -n "/CONFIG_BASE_DEFCONFIG=/s/CONFIG_BASE_DEFCONFIG=//p" configs/${BASE1_DEFCONFIG} |tr -d '\r' | tr -d '"'`
252						MAKE_CMD="make ${BASE0_DEFCONFIG} ${BASE1_DEFCONFIG} ${ARG_BOARD}.config -j${JOB}"
253						echo "## ${MAKE_CMD}"
254						make ${BASE0_DEFCONFIG} ${BASE1_DEFCONFIG} ${ARG_BOARD}.config ${OPTION}
255					else
256						MAKE_CMD="make ${ARG_BOARD}_defconfig -j${JOB}"
257						echo "## ${MAKE_CMD}"
258						make ${ARG_BOARD}_defconfig ${OPTION}
259					fi
260				fi
261				shift 1
262				;;
263		esac
264	done
265
266	if [ ! -f .config ]; then
267		echo
268		echo "ERROR: No .config"
269		help
270		exit 1
271	fi
272}
273
274function select_toolchain()
275{
276	if grep -q '^CONFIG_ARM64=y' .config ; then
277		if [ -d ${TOOLCHAIN_ARM64} ]; then
278			absolute_path=$(cd `dirname ${TOOLCHAIN_ARM64}`; pwd)
279			TOOLCHAIN_NM=${absolute_path}/bin/${NM_ARM64}
280			TOOLCHAIN_GCC=${absolute_path}/bin/${GCC_ARM64}
281			TOOLCHAIN_OBJDUMP=${absolute_path}/bin/${OBJ_ARM64}
282			TOOLCHAIN_ADDR2LINE=${absolute_path}/bin/${ADDR2LINE_ARM64}
283		else
284			echo "ERROR: No toolchain: ${TOOLCHAIN_ARM64}"
285			exit 1
286		fi
287	else
288		if [ -d ${TOOLCHAIN_ARM32} ]; then
289			absolute_path=$(cd `dirname ${TOOLCHAIN_ARM32}`; pwd)
290			TOOLCHAIN_NM=${absolute_path}/bin/${NM_ARM32}
291			TOOLCHAIN_GCC=${absolute_path}/bin/${GCC_ARM32}
292			TOOLCHAIN_OBJDUMP=${absolute_path}/bin/${OBJ_ARM32}
293			TOOLCHAIN_ADDR2LINE=${absolute_path}/bin/${ADDR2LINE_ARM32}
294		else
295			echo "ERROR: No toolchain: ${TOOLCHAIN_ARM32}"
296			exit 1
297		fi
298	fi
299}
300
301#
302# We select chip info to do:
303#	1. RKCHIP:        fixup platform configure
304#	2. RKCHIP_LOADER: search ini file to pack loader
305#	3. RKCHIP_TRUST:  search ini file to pack trust
306#	4. RKCHIP_LABEL:  show build message
307#
308function select_chip_info()
309{
310	# Read RKCHIP firstly from .config
311	# The regular expression that matching:
312	#  - PX30, PX3SE
313	#  - RK????, RK????X
314	#  - RV????
315	CHIP_PATTERN='^CONFIG_ROCKCHIP_[R,P][X,V,K][0-9ESX]{1,5}'
316	RKCHIP=`egrep -o ${CHIP_PATTERN} .config`
317
318	# default
319	RKCHIP=${RKCHIP##*_}
320	# fixup ?
321	for item in "${CHIP_TYPE_FIXUP_TABLE[@]}"
322	do
323		CONFIG_ROCKCHIP_XXX=`echo ${item} | awk '{ print $1 }'`
324		if grep  -q "^${CONFIG_ROCKCHIP_XXX}=y" .config ; then
325			RKCHIP=`echo ${item} | awk '{ print $2 }'`
326			RKCHIP_LOADER=`echo ${item} | awk '{ print $3 }'`
327			RKCHIP_TRUST=`echo  ${item} | awk '{ print $4 }'`
328			RKCHIP_LABEL=`echo  ${item} | awk '{ print $5 }'`
329		fi
330	done
331
332	if [ "${RKCHIP_LOADER}" == "-" ]; then
333		RKCHIP_LOADER=${RKCHIP}
334	fi
335	if [ "${RKCHIP_TRUST}" == "-" ]; then
336		RKCHIP_TRUST=${RKCHIP}
337	fi
338	if [ "${RKCHIP_LABEL}" == "-" ]; then
339		RKCHIP_LABEL=${RKCHIP}
340	fi
341}
342
343# Priority: default < CHIP_CFG_FIXUP_TABLE() < make.sh args
344function fixup_platform_configure()
345{
346	U_KB="-" U_NUM="-" T_KB="-" T_NUM="-"  SHA="-" RSA="-"
347
348	for item in "${CHIP_CFG_FIXUP_TABLE[@]}"
349	do
350		config_xxx=`echo ${item} | awk '{ print $1 }'`
351		if grep  -q "^${config_xxx}=y" .config ; then
352			# <*> Fixup rsa/sha pack mode for platforms
353			RSA=`echo ${item} | awk '{ print $2 }'`
354			SHA=`echo ${item} | awk '{ print $3 }'`
355
356			# <*> Fixup images size pack for platforms, and ini file
357			if grep -q '^CONFIG_ARM64=y' .config ; then
358				U_KB=`echo  ${item} | awk '{ print $4 }' | awk -F "," '{ print $1 }'`
359				T_KB=`echo  ${item} | awk '{ print $4 }' | awk -F "," '{ print $2 }'`
360				U_NUM=`echo ${item} | awk '{ print $5 }' | awk -F "," '{ print $1 }'`
361				T_NUM=`echo ${item} | awk '{ print $5 }' | awk -F "," '{ print $2 }'`
362			else
363				U_KB=`echo  ${item} | awk '{ print $6 }' | awk -F "," '{ print $1 }'`
364				T_KB=`echo  ${item} | awk '{ print $6 }' | awk -F "," '{ print $2 }'`
365				U_NUM=`echo ${item} | awk '{ print $7 }' | awk -F "," '{ print $1 }'`
366				T_NUM=`echo ${item} | awk '{ print $7 }' | awk -F "," '{ print $2 }'`
367				# AArch32
368				if grep -q '^CONFIG_ARM64_BOOT_AARCH32=y' .config ; then
369					PADDING=`echo ${item} | awk '{ print $8 }'`
370					if [ "${PADDING}" != "-" ]; then
371						RKCHIP_LOADER=${RKCHIP_LOADER}${PADDING}
372					fi
373					PADDING=`echo  ${item} | awk '{ print $9 }'`
374					if [ "${PADDING}" != "-" ]; then
375						RKCHIP_TRUST=${RKCHIP_TRUST}${PADDING}
376					fi
377					RKCHIP_LABEL=${RKCHIP_LABEL}"AARCH32"
378				fi
379			fi
380		fi
381	done
382
383	if [ "${SHA}" != "-" ]; then
384		PLAT_SHA="--sha ${SHA}"
385	fi
386	if [ "${RSA}" != "-" ]; then
387		PLAT_RSA="--rsa ${RSA}"
388	fi
389	if [ "${U_KB}" != "-" ]; then
390		PLAT_UBOOT_SIZE="--size ${U_KB} ${U_NUM}"
391	fi
392	if [ "${T_KB}" != "-" ]; then
393		PLAT_TRUST_SIZE="--size ${T_KB} ${T_NUM}"
394	fi
395
396	# args
397	if [ ! -z "${ARG_UBOOT_SIZE}" ]; then
398		PLAT_UBOOT_SIZE=${ARG_UBOOT_SIZE}
399	fi
400
401	if [ ! -z "${ARG_TRUST_SIZE}" ]; then
402		PLAT_TRUST_SIZE=${ARG_TRUST_SIZE}
403	fi
404}
405
406# Priority: default < CHIP_TYPE_FIXUP_TABLE() < defconfig < make.sh args
407function select_ini_file()
408{
409	# default
410	INI_LOADER=${RKBIN}/RKBOOT/${RKCHIP_LOADER}MINIALL.ini
411	if [ "${ARM64_TRUSTZONE}" == "y" ]; then
412		INI_TRUST=${RKBIN}/RKTRUST/${RKCHIP_TRUST}TRUST.ini
413	else
414		INI_TRUST=${RKBIN}/RKTRUST/${RKCHIP_TRUST}TOS.ini
415	fi
416
417	# defconfig
418	NAME=`sed -n "/CONFIG_LOADER_INI=/s/CONFIG_LOADER_INI=//p" .config |tr -d '\r' | tr -d '"'`
419	if [ ! -z "${NAME}" ]; then
420		INI_LOADER=${RKBIN}/RKBOOT/${NAME}
421	fi
422	NAME=`sed -n "/CONFIG_TRUST_INI=/s/CONFIG_TRUST_INI=//p" .config |tr -d '\r' | tr -d '"'`
423	if [ ! -z "${NAME}" ]; then
424		INI_TRUST=${RKBIN}/RKTRUST/${NAME}
425	fi
426
427	# args
428	if [ ! -z "${ARG_INI_TRUST}" ]; then
429		INI_TRUST=${ARG_INI_TRUST}
430	fi
431	if [ ! -z "${ARG_INI_LOADER}" ]; then
432		INI_LOADER=${ARG_INI_LOADER}
433	fi
434}
435
436function sub_commands()
437{
438	# skip "--" parameter, such as "--rollback-index-..."
439	if [[ ${CMD_ARGS} != --* ]]; then
440		CMD=${CMD_ARGS%-*}
441		ARG=${CMD_ARGS#*-}
442	else
443		CMD=${CMD_ARGS}
444	fi
445
446	if [ "${ARG_TSPL}" == "tpl" -o "${ARG_TSPL}" == "spl" ]; then
447		ELF=`find -name u-boot-${ARG_TSPL}`
448		MAP=`find -name u-boot-${ARG_TSPL}.map`
449		SYM=`find -name u-boot-${ARG_TSPL}.sym`
450	else
451		ELF=u-boot
452		MAP=u-boot.map
453		SYM=u-boot.sym
454	fi
455
456	case ${CMD} in
457		elf|nm)
458			if [ "${CMD}" == "nm" ]; then
459				${TOOLCHAIN_NM} -r --size ${ELF} | less
460			else
461				if [ "${CMD}" == "elf" -a "${ARG}" == "elf" ]; then
462					ARG=D # default
463				fi
464				${TOOLCHAIN_OBJDUMP} -${ARG} ${ELF} | less
465			fi
466			exit 0
467			;;
468		map|sym)
469			if [ ${CMD} == "map" ]; then
470				cat ${MAP} | less
471			else
472				cat ${SYM} | less
473			fi
474			exit 0
475			;;
476		debug)
477			./scripts/rkpatch.sh ${ARG}
478			exit 0
479			;;
480		fit)
481			# Non-secure
482			${SCRIPT_FIT} --uboot-itb --boot-itb --no-vboot ${ARG_LIST_FIT}
483			exit 0
484			;;
485		uboot)
486			pack_uboot_image
487			exit 0
488			;;
489		trust)
490			pack_trust_image
491			exit 0
492			;;
493		loader)
494			pack_loader_image
495			exit 0
496			;;
497		itb)
498			pack_uboot_itb_image
499			exit 0
500			;;
501		env)
502			make CROSS_COMPILE=${TOOLCHAIN_GCC} envtools
503			exit 0
504			;;
505		--idblock)
506			pack_idblock
507			exit 0
508			;;
509		--tpl|--spl|tpl|spl)
510			pack_spl_loader_image
511			exit 0
512			;;
513		*)
514			unwind_addr_or_continue
515			;;
516	esac
517}
518
519function unwind_addr_or_continue()
520{
521	FUNCADDR=${ARG_FUNCADDR}
522	RELOCOFF=${FUNCADDR#*-}
523	FUNCADDR=${FUNCADDR%-*}
524
525	if [ -z $(echo ${FUNCADDR} | sed 's/[0-9,a-f,A-F,x,X,-]//g') ] && [ ${FUNCADDR} ]; then
526		# With prefix: '0x' or '0X'
527		if [ `echo ${FUNCADDR} | sed -n "/0[x,X]/p" | wc -l` -ne 0 ]; then
528			FUNCADDR=`echo ${FUNCADDR} | awk '{ print strtonum($0) }'`
529			FUNCADDR=`echo "obase=16;${FUNCADDR}"|bc | tr '[A-Z]' '[a-z]'`
530		fi
531		if [ `echo ${RELOCOFF} | sed -n "/0[x,X]/p" | wc -l` -ne 0 ] && [ ${RELOCOFF} ]; then
532			RELOCOFF=`echo ${RELOCOFF} | awk '{ print strtonum($0) }'`
533			RELOCOFF=`echo "obase=16;${RELOCOFF}"|bc | tr '[A-Z]' '[a-z]'`
534		fi
535
536		# If reloc address is assigned, do sub
537		if [ "${FUNCADDR}" != "${RELOCOFF}" ]; then
538			# Hex -> Dec -> SUB -> Hex
539			FUNCADDR=`echo $((16#${FUNCADDR}))`
540			RELOCOFF=`echo $((16#${RELOCOFF}))`
541			FUNCADDR=$((FUNCADDR-RELOCOFF))
542			FUNCADDR=$(echo "obase=16;${FUNCADDR}"|bc | tr '[A-Z]' '[a-z]')
543		fi
544
545		echo
546		sed -n "/${FUNCADDR}/p" ${SYM}
547		${TOOLCHAIN_ADDR2LINE} -e ${ELF} ${FUNCADDR}
548		exit 0
549	fi
550}
551
552function pack_idblock()
553{
554	INI=${INI_LOADER}
555	if [ ! -f ${INI} ]; then
556		echo "ERROR: No ${INI}"
557		exit 1
558	fi
559
560	# chip
561	COMMON_H=`grep "_common.h:" include/autoconf.mk.dep | awk -F "/" '{ printf $3 }'`
562	PLAT=${COMMON_H%_*}
563
564	# file
565	SPL_BIN=${RKBIN}/`sed -n "/FlashBoot=/s/FlashBoot=//p" ${INI} | tr -d '\r'`
566	TPL_BIN=${RKBIN}/`sed -n "/FlashData=/s/FlashData=//p" ${INI} | tr -d '\r'`
567	if [ ! -z "${ARG_SPL_BIN}" ]; then
568		SPL_BIN=${ARG_SPL_BIN}
569	fi
570	if [ ! -z "${ARG_TPL_BIN}" ]; then
571		TPL_BIN=${ARG_TPL_BIN}
572	fi
573
574	# pack
575	rm idblock.bin -f
576	./tools/mkimage -n ${PLAT} -T rksd -d ${TPL_BIN}:${SPL_BIN} idblock.bin
577	echo "Input:"
578	echo "    ${INI}"
579	echo "    ${TPL_BIN}"
580	echo "    ${SPL_BIN}"
581	echo
582	echo "Pack ${PLAT} idblock.bin okay!"
583	echo
584}
585
586function pack_uboot_itb_image()
587{
588	INI=${INI_TRUST}
589	if [ ! -f ${INI} ]; then
590		echo "ERROR: No ${INI}"
591		exit 1
592	fi
593
594	if [ "${ARM64_TRUSTZONE}" == "y" ]; then
595		BL31_ELF=`sed -n '/_bl31_/s/PATH=//p' ${INI} | tr -d '\r'`
596		cp ${RKBIN}/${BL31_ELF} bl31.elf
597		make CROSS_COMPILE=${TOOLCHAIN_GCC} u-boot.itb
598		echo "pack u-boot.itb okay! Input: ${INI}"
599	else
600		# TOS
601		TOS=`sed -n "/TOS=/s/TOS=//p" ${INI} | tr -d '\r'`
602		TOSTA=`sed -n "/TOSTA=/s/TOSTA=//p" ${INI} | tr -d '\r'`
603		if [ ! -z "${TOSTA}" ]; then
604			cp ${RKBIN}/${TOSTA} tee.bin
605		elif [ ! -z "${TOS}" ]; then
606			cp ${RKBIN}/${TOS}   tee.bin
607		else
608			echo "ERROR: No tee bin"
609			exit 1
610		fi
611
612		TEE_OFFSET=`sed -n "/ADDR=/s/ADDR=//p" ${INI} | tr -d '\r'`
613		if [ "${TEE_OFFSET}" == "" ]; then
614			TEE_OFFSET=0x8400000
615		fi
616
617		# MCU
618		MCU_ENABLED=`awk -F"," '/MCU=/ { printf $3 }' ${INI} | tr -d ' '`
619		if [ "${MCU_ENABLED}" == "enabled" -o "${MCU_ENABLED}" == "okay" ]; then
620			MCU=`awk -F"," '/MCU=/  { printf $1 }' ${INI} | tr -d ' ' | cut -c 5-`
621			cp ${RKBIN}/${MCU} mcu.bin
622			MCU_OFFSET=`awk -F"," '/MCU=/ { printf $2 }' ${INI} | tr -d ' '`
623		fi
624
625		COMPRESSION=`awk -F"," '/COMPRESSION=/  { printf $1 }' ${INI} | tr -d ' ' | cut -c 13-`
626		if [ -z "${COMPRESSION}" ]; then
627			COMPRESSION="none"
628		fi
629
630		# its
631		SPL_FIT_SOURCE=`sed -n "/CONFIG_SPL_FIT_SOURCE=/s/CONFIG_SPL_FIT_SOURCE=//p" .config | tr -d '""'`
632		if [ ! -z ${SPL_FIT_SOURCE} ]; then
633			cp ${SPL_FIT_SOURCE} u-boot.its
634		else
635			SPL_FIT_GENERATOR=`sed -n "/CONFIG_SPL_FIT_GENERATOR=/s/CONFIG_SPL_FIT_GENERATOR=//p" .config | tr -d '""'`
636			if [ ! -z ${MCU_OFFSET} ]; then
637				${SPL_FIT_GENERATOR} -u -t ${TEE_OFFSET} -c ${COMPRESSION} -m ${MCU_OFFSET} > u-boot.its
638			else
639				${SPL_FIT_GENERATOR} -u -t ${TEE_OFFSET} -c ${COMPRESSION} > u-boot.its
640			fi
641		fi
642
643		./tools/mkimage -f u-boot.its -E u-boot.itb
644		echo "pack u-boot.itb okay! Input: ${INI}"
645	fi
646	echo
647}
648
649function pack_spl_loader_image()
650{
651	rm *_loader_*.bin -f
652	cd ${RKBIN}
653	if [ ! -z "${ARG_SPL_BIN}" -a ! -z "${ARG_TPL_BIN}" ]; then
654		${SCRIPT_SPL} --ini ${INI_LOADER} --tpl ${SRCTREE}/${ARG_TPL_BIN} --spl ${SRCTREE}/${ARG_SPL_BIN}
655	elif [ ! -z "${ARG_TPL_BIN}" ]; then
656		${SCRIPT_SPL} --ini ${INI_LOADER} --tpl ${SRCTREE}/${ARG_TPL_BIN}
657	else
658		${SCRIPT_SPL} --ini ${INI_LOADER} --spl ${SRCTREE}/${ARG_SPL_BIN}
659	fi
660	cd -
661	if [ -f ${RKBIN}/*_loader_*.bin ]; then
662		mv ${RKBIN}/*_loader_*.bin ./
663	fi
664}
665
666function pack_uboot_image()
667{
668	rm u-boot.img u-boot-dtb.img -f
669	LOAD_ADDR=`sed -n "/CONFIG_SYS_TEXT_BASE=/s/CONFIG_SYS_TEXT_BASE=//p" include/autoconf.mk|tr -d '\r'`
670	if [ -z "${LOAD_ADDR}" ]; then
671		# upstream U-Boot
672		LOAD_ADDR=`grep CONFIG_SYS_TEXT_BASE include/generated/autoconf.h | awk '{ print $3 }' | tr -d '\r'`
673	fi
674
675	if [ -z "${LOAD_ADDR}" ]; then
676		echo "ERROR: No CONFIG_SYS_TEXT_BASE for u-boot";
677		exit 1
678	fi
679
680	${SCRIPT_UBOOT} --load ${LOAD_ADDR} ${PLAT_UBOOT_SIZE}
681}
682
683function pack_loader_image()
684{
685	rm *_loader_*.bin -f
686	cd ${RKBIN}
687	${SCRIPT_LOADER} --ini ${INI_LOADER}
688	cd -
689	if [ -f ${RKBIN}/*_loader_*.bin ]; then
690		mv ${RKBIN}/*_loader_*.bin ./
691	fi
692}
693
694function pack_trust_image()
695{
696	DRAM_BASE=`sed -n "/CONFIG_SYS_SDRAM_BASE=/s/CONFIG_SYS_SDRAM_BASE=//p" include/autoconf.mk|tr -d '\r'`
697
698	rm trust*.img -f
699	cd ${RKBIN}
700	if [ "${ARM64_TRUSTZONE}" == "y" ]; then
701		${SCRIPT_ATF} --ini ${INI_TRUST} ${PLAT_SHA} ${PLAT_RSA} ${PLAT_TRUST_SIZE}
702	else
703		${SCRIPT_TOS} --ini ${INI_TRUST} --base ${DRAM_BASE} ${PLAT_TRUST_SIZE}
704	fi
705	cd -
706	if [ -f ${RKBIN}/trust*.img ]; then
707		mv ${RKBIN}/trust*.img ./
708	fi
709}
710
711function pack_fit_image()
712{
713	# If we don't plan to have uboot in uboot.img in case of: SPL => Trust => Kernel, creating empty files.
714	if [ "${ARG_NO_UBOOT}" == "y" ]; then
715		rm u-boot-nodtb.bin u-boot.dtb -f
716		touch u-boot-nodtb.bin u-boot.dtb
717	fi
718
719	# Verified boot=1:  must build both uboot.img and boot.img
720	# Verified boot=0:  build uboot.img
721	if grep -q '^CONFIG_FIT_SIGNATURE=y' .config ; then
722		${SCRIPT_FIT} --uboot-itb --boot-itb ${ARG_LIST_FIT}
723	else
724		rm uboot.img trust*.img -f
725		${SCRIPT_FIT} --uboot-itb --no-vboot --no-rebuild ${ARG_LIST_FIT}
726		echo "pack uboot.img okay! Input: ${INI_TRUST}"
727	fi
728}
729
730function handle_args_late()
731{
732	ARG_LIST_FIT="${ARG_LIST_FIT} --ini-trust ${INI_TRUST} --ini-loader ${INI_LOADER}"
733}
734
735function clean_files()
736{
737	rm spl/u-boot-spl.dtb tpl/u-boot-tpl.dtb u-boot.dtb -f
738	rm spl/u-boot-spl tpl/u-boot-tpl u-boot -f
739}
740
741function pack_images()
742{
743	if [ "${ARG_NO_PACK}" == "y" ]; then
744		return
745	fi
746
747	if [ "${PLAT_TYPE}" == "RKFW" ]; then
748		pack_uboot_image
749		pack_trust_image
750		pack_loader_image
751	elif [ "${PLAT_TYPE}" == "FIT" ]; then
752		pack_fit_image ${ARG_LIST_FIT}
753	fi
754}
755
756function finish()
757{
758	echo
759	if [ "${ARG_BOARD}" == "" ]; then
760		echo "Platform ${RKCHIP_LABEL} is build OK, with exist .config"
761	else
762		echo "Platform ${RKCHIP_LABEL} is build OK, with new .config(${MAKE_CMD})"
763	fi
764}
765
766process_args $*
767prepare
768select_toolchain
769select_chip_info
770fixup_platform_configure
771select_ini_file
772handle_args_late
773sub_commands
774clean_files
775make CROSS_COMPILE=${TOOLCHAIN_GCC} all --jobs=${JOB}
776pack_images
777finish
778