1menu "Library routines" 2 3config BCH 4 bool "Enable Software based BCH ECC" 5 help 6 Enables software based BCH ECC algorithm present in lib/bch.c 7 This is used by SoC platforms which do not have built-in ELM 8 hardware engine required for BCH ECC correction. 9 10config CC_OPTIMIZE_LIBS_FOR_SPEED 11 bool "Optimize libraries for speed" 12 help 13 Enabling this option will pass "-O2" to gcc when compiling 14 under "lib" directory. 15 16 If unsure, say N. 17 18config HAVE_PRIVATE_LIBGCC 19 bool 20 21config USE_PRIVATE_LIBGCC 22 bool "Use private libgcc" 23 depends on HAVE_PRIVATE_LIBGCC 24 default y if HAVE_PRIVATE_LIBGCC && ((ARM && !ARM64) || MIPS) 25 help 26 This option allows you to use the built-in libgcc implementation 27 of U-Boot instead of the one provided by the compiler. 28 If unsure, say N. 29 30config SYS_HZ 31 int 32 default 1000 33 help 34 The frequency of the timer returned by get_timer(). 35 get_timer() must operate in milliseconds and this option must be 36 set to 1000. 37 38config USE_TINY_PRINTF 39 bool "Enable tiny printf() version" 40 help 41 This option enables a tiny, stripped down printf version. 42 This should only be used in space limited environments, 43 like SPL versions with hard memory limits. This version 44 reduces the code size by about 2.5KiB on armv7. 45 46 The supported format specifiers are %c, %s, %u/%d and %x. 47 48config REGEX 49 bool "Enable regular expression support" 50 default y if NET 51 help 52 If this variable is defined, U-Boot is linked against the 53 SLRE (Super Light Regular Expression) library, which adds 54 regex support to some commands, for example "env grep" and 55 "setexpr". 56 57config LIB_RAND 58 bool "Pseudo-random library support " 59 help 60 This library provides pseudo-random number generator functions. 61 62config SPL_TINY_MEMSET 63 bool "Use a very small memset() in SPL" 64 help 65 The faster memset() is the arch-specific one (if available) enabled 66 by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get 67 better performance by writing a word at a time. But in very 68 size-constrained envrionments even this may be too big. Enable this 69 option to reduce code size slightly at the cost of some speed. 70 71config TPL_TINY_MEMSET 72 bool "Use a very small memset() in TPL" 73 help 74 The faster memset() is the arch-specific one (if available) enabled 75 by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get 76 better performance by writing a word at a time. But in very 77 size-constrained envrionments even this may be too big. Enable this 78 option to reduce code size slightly at the cost of some speed. 79 80config RBTREE 81 bool 82 83config BITREVERSE 84 bool 85 86source lib/dhry/Kconfig 87 88menu "Security support" 89 90config AES 91 bool "Support the AES algorithm" 92 help 93 This provides a means to encrypt and decrypt data using the AES 94 (Advanced Encryption Standard). This algorithm uses a symetric key 95 and is widely used as a streaming cipher. Different key lengths are 96 supported by the algorithm but only a 128-bit key is supported at 97 present. 98 99source lib/rsa/Kconfig 100 101config TPM 102 bool "Trusted Platform Module (TPM) Support" 103 depends on DM 104 help 105 This enables support for TPMs which can be used to provide security 106 features for your board. The TPM can be connected via LPC or I2C 107 and a sandbox TPM is provided for testing purposes. Use the 'tpm' 108 command to interactive the TPM. Driver model support is provided 109 for the low-level TPM interface, but only one TPM is supported at 110 a time by the TPM library. 111 112endmenu 113 114menu "Hashing Support" 115 116config SHA1 117 bool "Enable SHA1 support" 118 help 119 This option enables support of hashing using SHA1 algorithm. 120 The hash is calculated in software. 121 The SHA1 algorithm produces a 160-bit (20-byte) hash value 122 (digest). 123 124config SHA256 125 bool "Enable SHA256 support" 126 help 127 This option enables support of hashing using SHA256 algorithm. 128 The hash is calculated in software. 129 The SHA256 algorithm produces a 256-bit (32-byte) hash value 130 (digest). 131 132config SHA_HW_ACCEL 133 bool "Enable hashing using hardware" 134 help 135 This option enables hardware acceleration 136 for SHA1/SHA256 hashing. 137 This affects the 'hash' command and also the 138 hash_lookup_algo() function. 139 140config SHA_PROG_HW_ACCEL 141 bool "Enable Progressive hashing support using hardware" 142 depends on SHA_HW_ACCEL 143 help 144 This option enables hardware-acceleration for 145 SHA1/SHA256 progressive hashing. 146 Data can be streamed in a block at a time and the hashing 147 is performed in hardware. 148 149config MD5 150 bool 151 152endmenu 153 154menu "Compression Support" 155 156config LZ4 157 bool "Enable LZ4 decompression support" 158 help 159 If this option is set, support for LZ4 compressed images 160 is included. The LZ4 algorithm can run in-place as long as the 161 compressed image is loaded to the end of the output buffer, and 162 trades lower compression ratios for much faster decompression. 163 164 NOTE: This implements the release version of the LZ4 frame 165 format as generated by default by the 'lz4' command line tool. 166 This is not the same as the outdated, less efficient legacy 167 frame format currently (2015) implemented in the Linux kernel 168 (generated by 'lz4 -l'). The two formats are incompatible. 169 170config LZMA 171 bool "Enable LZMA decompression support" 172 help 173 This enables support for LZMA (Lempel-Ziv-Markov chain algorithm), 174 a dictionary compression algorithm that provides a high compression 175 ratio and fairly fast decompression speed. See also 176 CONFIG_CMD_LZMADEC which provides a decode command. 177 178config LZO 179 bool "Enable LZO decompression support" 180 help 181 This enables support for LZO compression algorithm.r 182 183config SPL_GZIP 184 bool "Enable gzip decompression support for SPL build" 185 select SPL_ZLIB 186 help 187 This enables support for GZIP compression altorithm for SPL boot. 188 189config SPL_ZLIB 190 bool 191 help 192 This enables compression lib for SPL boot. 193 194endmenu 195 196config ERRNO_STR 197 bool "Enable function for getting errno-related string message" 198 help 199 The function errno_str(int errno), returns a pointer to the errno 200 corresponding text message: 201 - if errno is null or positive number - a pointer to "Success" message 202 - if errno is negative - a pointer to errno related message 203 204config OF_LIBFDT 205 bool "Enable the FDT library" 206 default y if OF_CONTROL 207 help 208 This enables the FDT library (libfdt). It provides functions for 209 accessing binary device tree images in memory, such as adding and 210 removing nodes and properties, scanning through the tree and finding 211 particular compatible nodes. The library operates on a flattened 212 version of the device tree. 213 214config OF_LIBFDT_OVERLAY 215 bool "Enable the FDT library overlay support" 216 help 217 This enables the FDT library (libfdt) overlay support. 218 219config SPL_OF_LIBFDT 220 bool "Enable the FDT library for SPL" 221 default y if SPL_OF_CONTROL 222 help 223 This enables the FDT library (libfdt). It provides functions for 224 accessing binary device tree images in memory, such as adding and 225 removing nodes and properties, scanning through the tree and finding 226 particular compatible nodes. The library operates on a flattened 227 version of the device tree. 228 229config TPL_OF_LIBFDT 230 bool "Enable the FDT library for TPL" 231 default y if TPL_OF_CONTROL 232 help 233 This enables the FDT library (libfdt). It provides functions for 234 accessing binary device tree images in memory, such as adding and 235 removing nodes and properties, scanning through the tree and finding 236 particular compatible nodes. The library operates on a flattened 237 version of the device tree. 238 239config FDT_FIXUP_PARTITIONS 240 bool "overwrite MTD partitions in DTS through defined in 'mtdparts'" 241 depends on OF_LIBFDT 242 default n 243 help 244 Allow overwriting defined partitions in the device tree blob 245 using partition info defined in the 'mtdparts' environment 246 variable. 247 248menu "System tables" 249 depends on (!EFI && !SYS_COREBOOT) || (ARM && EFI_LOADER) 250 251config GENERATE_SMBIOS_TABLE 252 bool "Generate an SMBIOS (System Management BIOS) table" 253 default y 254 depends on X86 || EFI_LOADER 255 help 256 The System Management BIOS (SMBIOS) specification addresses how 257 motherboard and system vendors present management information about 258 their products in a standard format by extending the BIOS interface 259 on Intel architecture systems. 260 261 Check http://www.dmtf.org/standards/smbios for details. 262 263config SMBIOS_MANUFACTURER 264 string "SMBIOS Manufacturer" 265 depends on GENERATE_SMBIOS_TABLE 266 default SYS_VENDOR 267 help 268 The board manufacturer to store in SMBIOS structures. 269 Change this to override the default one (CONFIG_SYS_VENDOR). 270 271config SMBIOS_PRODUCT_NAME 272 string "SMBIOS Product Name" 273 depends on GENERATE_SMBIOS_TABLE 274 default SYS_BOARD 275 help 276 The product name to store in SMBIOS structures. 277 Change this to override the default one (CONFIG_SYS_BOARD). 278 279endmenu 280 281source lib/efi/Kconfig 282source lib/efi_loader/Kconfig 283source lib/avb/rk_libavb/Kconfig 284source lib/avb/rk_libavb_ab/Kconfig 285source lib/avb/rk_libavb_atx/Kconfig 286source lib/avb/rk_libavb_user/Kconfig 287source lib/optee_clientApi/Kconfig 288 289endmenu 290