1 /* 2 * (C) Copyright 2012 3 * Texas Instruments, <www.ti.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 #ifndef _SPL_H_ 8 #define _SPL_H_ 9 10 /* Platform-specific defines */ 11 #include <linux/compiler.h> 12 #include <asm/spl.h> 13 14 /* Value in r0 indicates we booted from U-Boot */ 15 #define UBOOT_NOT_LOADED_FROM_SPL 0x13578642 16 17 /* Boot type */ 18 #define MMCSD_MODE_UNDEFINED 0 19 #define MMCSD_MODE_RAW 1 20 #define MMCSD_MODE_FS 2 21 #define MMCSD_MODE_EMMCBOOT 3 22 23 struct spl_image_info { 24 const char *name; 25 u8 os; 26 u32 load_addr; 27 u32 entry_point; 28 u32 size; 29 u32 flags; 30 }; 31 32 /* 33 * Information required to load data from a device 34 * 35 * @dev: Pointer to the device, e.g. struct mmc * 36 * @priv: Private data for the device 37 * @bl_len: Block length for reading in bytes 38 * @filename: Name of the fit image file. 39 * @read: Function to call to read from the device 40 */ 41 struct spl_load_info { 42 void *dev; 43 void *priv; 44 int bl_len; 45 const char *filename; 46 ulong (*read)(struct spl_load_info *load, ulong sector, ulong count, 47 void *buf); 48 }; 49 50 /** 51 * spl_load_simple_fit() - Loads a fit image from a device. 52 * @info: Structure containing the information required to load data. 53 * @sector: Sector number where FIT image is located in the device 54 * @fdt: Pointer to the copied FIT header. 55 * 56 * Reads the FIT image @sector in the device. Loads u-boot image to 57 * specified load address and copies the dtb to end of u-boot image. 58 * Returns 0 on success. 59 */ 60 int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fdt); 61 62 #define SPL_COPY_PAYLOAD_ONLY 1 63 64 extern struct spl_image_info spl_image; 65 66 /* SPL common functions */ 67 void preloader_console_init(void); 68 u32 spl_boot_device(void); 69 u32 spl_boot_mode(const u32 boot_device); 70 71 /** 72 * spl_set_header_raw_uboot() - Set up a standard SPL image structure 73 * 74 * This sets up the given spl_image which the standard values obtained from 75 * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START, 76 * CONFIG_SYS_TEXT_BASE. 77 * 78 * @spl_image: Image description to set up 79 */ 80 void spl_set_header_raw_uboot(struct spl_image_info *spl_image); 81 82 /** 83 * spl_parse_image_header() - parse the image header and set up info 84 * 85 * This parses the legacy image header information at @header and sets up 86 * @spl_image according to what is found. If no image header is found, then 87 * a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is 88 * enabled, then this causes a panic. If CONFIG_SPL_ABORT_ON_RAW_IMAGE is 89 * enabled then U-Boot gives up. Otherwise U-Boot sets up the image using 90 * spl_set_header_raw_uboot(), or possibly the bootz header. 91 * 92 * @spl_image: Image description to set up 93 * @header image header to parse 94 * @return 0 if a header was correctly parsed, -ve on error 95 */ 96 int spl_parse_image_header(struct spl_image_info *spl_image, 97 const struct image_header *header); 98 99 void spl_board_prepare_for_linux(void); 100 void spl_board_prepare_for_boot(void); 101 int spl_board_ubi_load_image(u32 boot_device); 102 103 /** 104 * jump_to_image_linux() - Jump to a Linux kernel from SPL 105 * 106 * This jumps into a Linux kernel using the information in @spl_image. 107 * 108 * @spl_image: Image description to set up 109 * @arg: Argument to pass to Linux (typically a device tree pointer) 110 */ 111 void __noreturn jump_to_image_linux(struct spl_image_info *spl_image, 112 void *arg); 113 int spl_start_uboot(void); 114 void spl_display_print(void); 115 116 /* NAND SPL functions */ 117 int spl_nand_load_image(void); 118 119 /* OneNAND SPL functions */ 120 int spl_onenand_load_image(void); 121 122 /* NOR SPL functions */ 123 int spl_nor_load_image(void); 124 125 /* UBI SPL functions */ 126 int spl_ubi_load_image(u32 boot_device); 127 128 /* MMC SPL functions */ 129 int spl_mmc_load_image(u32 boot_device); 130 131 /* YMODEM SPL functions */ 132 int spl_ymodem_load_image(void); 133 134 /* SPI SPL functions */ 135 int spl_spi_load_image(void); 136 137 /* Ethernet SPL functions */ 138 int spl_net_load_image(const char *device); 139 140 /* USB SPL functions */ 141 int spl_usb_load_image(void); 142 143 /* SATA SPL functions */ 144 int spl_sata_load_image(void); 145 146 /* SPL FAT image functions */ 147 int spl_load_image_fat(struct blk_desc *block_dev, int partition, 148 const char *filename); 149 int spl_load_image_fat_os(struct blk_desc *block_dev, int partition); 150 151 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image); 152 153 /* SPL EXT image functions */ 154 int spl_load_image_ext(struct blk_desc *block_dev, int partition, 155 const char *filename); 156 int spl_load_image_ext_os(struct blk_desc *block_dev, int partition); 157 158 /** 159 * spl_init() - Set up device tree and driver model in SPL if enabled 160 * 161 * Call this function in board_init_f() if you want to use device tree and 162 * driver model early, before board_init_r() is called. This function will 163 * be called from board_init_r() if not called earlier. 164 * 165 * If this is not called, then driver model will be inactive in SPL's 166 * board_init_f(), and no device tree will be available. 167 */ 168 int spl_init(void); 169 170 #ifdef CONFIG_SPL_BOARD_INIT 171 void spl_board_init(void); 172 #endif 173 174 /** 175 * spl_was_boot_source() - check if U-Boot booted from SPL 176 * 177 * This will normally be true, but if U-Boot jumps to second U-Boot, it will 178 * be false. This should be implemented by board-specific code. 179 * 180 * @return true if U-Boot booted from SPL, else false 181 */ 182 bool spl_was_boot_source(void); 183 184 /** 185 * spl_dfu_cmd- run dfu command with chosen mmc device interface 186 * @param usb_index - usb controller number 187 * @param mmc_dev - mmc device nubmer 188 * 189 * @return 0 on success, otherwise error code 190 */ 191 int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr); 192 193 /** 194 * Board-specific load method for boards that have a special way of loading 195 * U-Boot, which does not fit with the existing SPL code. 196 * 197 * @return 0 on success, negative errno value on failure. 198 */ 199 int spl_board_load_image(void); 200 201 #endif 202