1 /* 2 * Common SPI flash Interface 3 * 4 * Copyright (C) 2008 Atmel Corporation 5 * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * version 2 as published by the Free Software Foundation. 13 */ 14 15 #ifndef _SPI_FLASH_H_ 16 #define _SPI_FLASH_H_ 17 18 #include <spi.h> 19 #include <linux/types.h> 20 #include <linux/compiler.h> 21 22 /* No enum list for write commands only QPP */ 23 #define WR_QPP 1 << 4 24 25 /* Enum list - Full read commands */ 26 enum spi_read_cmds { 27 ARRAY_SLOW = 1 << 0, 28 DUAL_OUTPUT_FAST = 1 << 1, 29 DUAL_IO_FAST = 1 << 2, 30 QUAD_OUTPUT_FAST = 1 << 3, 31 QUAD_IO_FAST = 1 << 4, 32 }; 33 #define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST 34 #define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST 35 36 /** 37 * struct spi_flash_params - SPI/QSPI flash device params structure 38 * 39 * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) 40 * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) 41 * @ext_jedec: Device ext_jedec ID 42 * @sector_size: Sector size of this device 43 * @nr_sectors: No.of sectors on this device 44 * @e_rd_cmd: Enum list for read commands 45 * @flags: Importent param, for flash specific behaviour 46 */ 47 struct spi_flash_params { 48 const char *name; 49 u32 jedec; 50 u16 ext_jedec; 51 u32 sector_size; 52 u32 nr_sectors; 53 u8 e_rd_cmd; 54 u16 flags; 55 }; 56 57 extern const struct spi_flash_params spi_flash_params_table[]; 58 59 /** 60 * struct spi_flash - SPI flash structure 61 * 62 * @spi: SPI slave 63 * @name: Name of SPI flash 64 * @size: Total flash size 65 * @page_size: Write (page) size 66 * @sector_size: Sector size 67 * @erase_size: Erase size 68 * @bank_read_cmd: Bank read cmd 69 * @bank_write_cmd: Bank write cmd 70 * @bank_curr: Current flash bank 71 * @poll_cmd: Poll cmd - for flash erase/program 72 * @erase_cmd: Erase cmd 4K, 32K, 64K 73 * @read_cmd: Read cmd - Array Fast, Extn read and quad read. 74 * @write_cmd: Write cmd - page and quad program. 75 * @memory_map: Address of read-only SPI flash access 76 * @read: Flash read ops: Read len bytes at offset into buf 77 * Supported cmds: Fast Array Read 78 * @write: Flash write ops: Write len bytes from buf into offeset 79 * Supported cmds: Page Program 80 * @erase: Flash erase ops: Erase len bytes from offset 81 * Supported cmds: Sector erase 4K, 32K, 64K 82 * return 0 - Sucess, 1 - Failure 83 */ 84 struct spi_flash { 85 struct spi_slave *spi; 86 const char *name; 87 88 u32 size; 89 u32 page_size; 90 u32 sector_size; 91 u32 erase_size; 92 #ifdef CONFIG_SPI_FLASH_BAR 93 u8 bank_read_cmd; 94 u8 bank_write_cmd; 95 u8 bank_curr; 96 #endif 97 u8 poll_cmd; 98 u8 erase_cmd; 99 u8 read_cmd; 100 u8 write_cmd; 101 102 void *memory_map; 103 int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); 104 int (*write)(struct spi_flash *flash, u32 offset, size_t len, 105 const void *buf); 106 int (*erase)(struct spi_flash *flash, u32 offset, size_t len); 107 }; 108 109 struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, 110 unsigned int max_hz, unsigned int spi_mode); 111 112 /** 113 * Set up a new SPI flash from an fdt node 114 * 115 * @param blob Device tree blob 116 * @param slave_node Pointer to this SPI slave node in the device tree 117 * @param spi_node Cached pointer to the SPI interface this node belongs 118 * to 119 * @return 0 if ok, -1 on error 120 */ 121 struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node, 122 int spi_node); 123 124 void spi_flash_free(struct spi_flash *flash); 125 126 static inline int spi_flash_read(struct spi_flash *flash, u32 offset, 127 size_t len, void *buf) 128 { 129 return flash->read(flash, offset, len, buf); 130 } 131 132 static inline int spi_flash_write(struct spi_flash *flash, u32 offset, 133 size_t len, const void *buf) 134 { 135 return flash->write(flash, offset, len, buf); 136 } 137 138 static inline int spi_flash_erase(struct spi_flash *flash, u32 offset, 139 size_t len) 140 { 141 return flash->erase(flash, offset, len); 142 } 143 144 void spi_boot(void) __noreturn; 145 146 #endif /* _SPI_FLASH_H_ */ 147