1 /* 2 * Copyright 2008,2010 Freescale Semiconductor, Inc 3 * Andy Fleming 4 * 5 * Based (loosely) on the Linux code 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _MMC_H_ 11 #define _MMC_H_ 12 13 #include <linux/list.h> 14 #include <linux/compiler.h> 15 #include <part.h> 16 17 #define SD_VERSION_SD 0x20000 18 #define SD_VERSION_3 (SD_VERSION_SD | 0x300) 19 #define SD_VERSION_2 (SD_VERSION_SD | 0x200) 20 #define SD_VERSION_1_0 (SD_VERSION_SD | 0x100) 21 #define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a) 22 #define MMC_VERSION_MMC 0x10000 23 #define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC) 24 #define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102) 25 #define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104) 26 #define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202) 27 #define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300) 28 #define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400) 29 #define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401) 30 #define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402) 31 #define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403) 32 #define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429) 33 #define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405) 34 #define MMC_VERSION_5_0 (MMC_VERSION_MMC | 0x500) 35 36 #define MMC_MODE_HS (1 << 0) 37 #define MMC_MODE_HS_52MHz (1 << 1) 38 #define MMC_MODE_4BIT (1 << 2) 39 #define MMC_MODE_8BIT (1 << 3) 40 #define MMC_MODE_SPI (1 << 4) 41 #define MMC_MODE_HC (1 << 5) 42 #define MMC_MODE_DDR_52MHz (1 << 6) 43 44 #define SD_DATA_4BIT 0x00040000 45 46 #define IS_SD(x) (x->version & SD_VERSION_SD) 47 48 #define MMC_DATA_READ 1 49 #define MMC_DATA_WRITE 2 50 51 #define NO_CARD_ERR -16 /* No SD/MMC card inserted */ 52 #define UNUSABLE_ERR -17 /* Unusable Card */ 53 #define COMM_ERR -18 /* Communications Error */ 54 #define TIMEOUT -19 55 #define IN_PROGRESS -20 /* operation is in progress */ 56 #define SWITCH_ERR -21 /* Card reports failure to switch mode */ 57 58 #define MMC_CMD_GO_IDLE_STATE 0 59 #define MMC_CMD_SEND_OP_COND 1 60 #define MMC_CMD_ALL_SEND_CID 2 61 #define MMC_CMD_SET_RELATIVE_ADDR 3 62 #define MMC_CMD_SET_DSR 4 63 #define MMC_CMD_SWITCH 6 64 #define MMC_CMD_SELECT_CARD 7 65 #define MMC_CMD_SEND_EXT_CSD 8 66 #define MMC_CMD_SEND_CSD 9 67 #define MMC_CMD_SEND_CID 10 68 #define MMC_CMD_STOP_TRANSMISSION 12 69 #define MMC_CMD_SEND_STATUS 13 70 #define MMC_CMD_SET_BLOCKLEN 16 71 #define MMC_CMD_READ_SINGLE_BLOCK 17 72 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 73 #define MMC_CMD_SET_BLOCK_COUNT 23 74 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 75 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 76 #define MMC_CMD_ERASE_GROUP_START 35 77 #define MMC_CMD_ERASE_GROUP_END 36 78 #define MMC_CMD_ERASE 38 79 #define MMC_CMD_APP_CMD 55 80 #define MMC_CMD_SPI_READ_OCR 58 81 #define MMC_CMD_SPI_CRC_ON_OFF 59 82 #define MMC_CMD_RES_MAN 62 83 84 #define MMC_CMD62_ARG1 0xefac62ec 85 #define MMC_CMD62_ARG2 0xcbaea7 86 87 88 #define SD_CMD_SEND_RELATIVE_ADDR 3 89 #define SD_CMD_SWITCH_FUNC 6 90 #define SD_CMD_SEND_IF_COND 8 91 #define SD_CMD_SWITCH_UHS18V 11 92 93 #define SD_CMD_APP_SET_BUS_WIDTH 6 94 #define SD_CMD_ERASE_WR_BLK_START 32 95 #define SD_CMD_ERASE_WR_BLK_END 33 96 #define SD_CMD_APP_SEND_OP_COND 41 97 #define SD_CMD_APP_SEND_SCR 51 98 99 /* SCR definitions in different words */ 100 #define SD_HIGHSPEED_BUSY 0x00020000 101 #define SD_HIGHSPEED_SUPPORTED 0x00020000 102 103 #define OCR_BUSY 0x80000000 104 #define OCR_HCS 0x40000000 105 #define OCR_VOLTAGE_MASK 0x007FFF80 106 #define OCR_ACCESS_MODE 0x60000000 107 108 #define SECURE_ERASE 0x80000000 109 110 #define MMC_STATUS_MASK (~0x0206BF7F) 111 #define MMC_STATUS_SWITCH_ERROR (1 << 7) 112 #define MMC_STATUS_RDY_FOR_DATA (1 << 8) 113 #define MMC_STATUS_CURR_STATE (0xf << 9) 114 #define MMC_STATUS_ERROR (1 << 19) 115 116 #define MMC_STATE_PRG (7 << 9) 117 118 #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ 119 #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ 120 #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ 121 #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ 122 #define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ 123 #define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ 124 #define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ 125 #define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ 126 #define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ 127 #define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ 128 #define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ 129 #define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ 130 #define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ 131 #define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ 132 #define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ 133 #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ 134 #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ 135 136 #define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ 137 #define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte 138 addressed by index which are 139 1 in value field */ 140 #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte 141 addressed by index, which are 142 1 in value field */ 143 #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */ 144 145 #define SD_SWITCH_CHECK 0 146 #define SD_SWITCH_SWITCH 1 147 148 /* 149 * EXT_CSD fields 150 */ 151 #define EXT_CSD_ENH_START_ADDR 136 /* R/W */ 152 #define EXT_CSD_ENH_SIZE_MULT 140 /* R/W */ 153 #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ 154 #define EXT_CSD_PARTITION_SETTING 155 /* R/W */ 155 #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */ 156 #define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */ 157 #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ 158 #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ 159 #define EXT_CSD_WR_REL_PARAM 166 /* R */ 160 #define EXT_CSD_WR_REL_SET 167 /* R/W */ 161 #define EXT_CSD_RPMB_MULT 168 /* RO */ 162 #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ 163 #define EXT_CSD_BOOT_BUS_WIDTH 177 164 #define EXT_CSD_PART_CONF 179 /* R/W */ 165 #define EXT_CSD_BUS_WIDTH 183 /* R/W */ 166 #define EXT_CSD_HS_TIMING 185 /* R/W */ 167 #define EXT_CSD_REV 192 /* RO */ 168 #define EXT_CSD_CARD_TYPE 196 /* RO */ 169 #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ 170 #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ 171 #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ 172 #define EXT_CSD_BOOT_MULT 226 /* RO */ 173 174 /* 175 * EXT_CSD field definitions 176 */ 177 178 #define EXT_CSD_CMD_SET_NORMAL (1 << 0) 179 #define EXT_CSD_CMD_SET_SECURE (1 << 1) 180 #define EXT_CSD_CMD_SET_CPSECURE (1 << 2) 181 182 #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ 183 #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ 184 #define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2) 185 #define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3) 186 #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ 187 | EXT_CSD_CARD_TYPE_DDR_1_2V) 188 189 #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ 190 #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ 191 #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ 192 #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ 193 #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ 194 195 #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) 196 #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) 197 #define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0) 198 #define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0) 199 200 #define EXT_CSD_BOOT_ACK(x) (x << 6) 201 #define EXT_CSD_BOOT_PART_NUM(x) (x << 3) 202 #define EXT_CSD_PARTITION_ACCESS(x) (x << 0) 203 204 #define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3) 205 #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) 206 #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x) 207 208 #define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0) 209 210 #define EXT_CSD_ENH_USR (1 << 0) /* user data area is enhanced */ 211 #define EXT_CSD_ENH_GP(x) (1 << ((x)+1)) /* GP part (x+1) is enhanced */ 212 213 #define EXT_CSD_HS_CTRL_REL (1 << 0) /* host controlled WR_REL_SET */ 214 215 #define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */ 216 #define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */ 217 218 #define R1_ILLEGAL_COMMAND (1 << 22) 219 #define R1_APP_CMD (1 << 5) 220 221 #define MMC_RSP_PRESENT (1 << 0) 222 #define MMC_RSP_136 (1 << 1) /* 136 bit response */ 223 #define MMC_RSP_CRC (1 << 2) /* expect valid crc */ 224 #define MMC_RSP_BUSY (1 << 3) /* card may send busy */ 225 #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ 226 227 #define MMC_RSP_NONE (0) 228 #define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 229 #define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \ 230 MMC_RSP_BUSY) 231 #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) 232 #define MMC_RSP_R3 (MMC_RSP_PRESENT) 233 #define MMC_RSP_R4 (MMC_RSP_PRESENT) 234 #define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 235 #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 236 #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 237 238 #define MMCPART_NOAVAILABLE (0xff) 239 #define PART_ACCESS_MASK (0x7) 240 #define PART_SUPPORT (0x1) 241 #define ENHNCD_SUPPORT (0x2) 242 #define PART_ENH_ATTRIB (0x1f) 243 244 /* Maximum block size for MMC */ 245 #define MMC_MAX_BLOCK_LEN 512 246 247 /* The number of MMC physical partitions. These consist of: 248 * boot partitions (2), general purpose partitions (4) in MMC v4.4. 249 */ 250 #define MMC_NUM_BOOT_PARTITION 2 251 #define MMC_PART_RPMB 3 /* RPMB partition number */ 252 253 struct mmc_cid { 254 unsigned long psn; 255 unsigned short oid; 256 unsigned char mid; 257 unsigned char prv; 258 unsigned char mdt; 259 char pnm[7]; 260 }; 261 262 struct mmc_cmd { 263 ushort cmdidx; 264 uint resp_type; 265 uint cmdarg; 266 uint response[4]; 267 }; 268 269 struct mmc_data { 270 union { 271 char *dest; 272 const char *src; /* src buffers don't get written to */ 273 }; 274 uint flags; 275 uint blocks; 276 uint blocksize; 277 }; 278 279 /* forward decl. */ 280 struct mmc; 281 282 struct mmc_ops { 283 int (*send_cmd)(struct mmc *mmc, 284 struct mmc_cmd *cmd, struct mmc_data *data); 285 void (*set_ios)(struct mmc *mmc); 286 int (*init)(struct mmc *mmc); 287 int (*getcd)(struct mmc *mmc); 288 int (*getwp)(struct mmc *mmc); 289 }; 290 291 struct mmc_config { 292 const char *name; 293 const struct mmc_ops *ops; 294 uint host_caps; 295 uint voltages; 296 uint f_min; 297 uint f_max; 298 uint b_max; 299 unsigned char part_type; 300 }; 301 302 /* TODO struct mmc should be in mmc_private but it's hard to fix right now */ 303 struct mmc { 304 struct list_head link; 305 const struct mmc_config *cfg; /* provided configuration */ 306 uint version; 307 void *priv; 308 uint has_init; 309 int high_capacity; 310 uint bus_width; 311 uint clock; 312 uint card_caps; 313 uint ocr; 314 uint dsr; 315 uint dsr_imp; 316 uint scr[2]; 317 uint csd[4]; 318 uint cid[4]; 319 ushort rca; 320 u8 part_support; 321 u8 part_attr; 322 u8 wr_rel_set; 323 char part_config; 324 char part_num; 325 uint tran_speed; 326 uint read_bl_len; 327 uint write_bl_len; 328 uint erase_grp_size; /* in 512-byte sectors */ 329 uint hc_wp_grp_size; /* in 512-byte sectors */ 330 u64 capacity; 331 u64 capacity_user; 332 u64 capacity_boot; 333 u64 capacity_rpmb; 334 u64 capacity_gp[4]; 335 u64 enh_user_start; 336 u64 enh_user_size; 337 block_dev_desc_t block_dev; 338 char op_cond_pending; /* 1 if we are waiting on an op_cond command */ 339 char init_in_progress; /* 1 if we have done mmc_start_init() */ 340 char preinit; /* start init as early as possible */ 341 uint op_cond_response; /* the response byte from the last op_cond */ 342 int ddr_mode; 343 }; 344 345 struct mmc_hwpart_conf { 346 struct { 347 uint enh_start; /* in 512-byte sectors */ 348 uint enh_size; /* in 512-byte sectors, if 0 no enh area */ 349 unsigned wr_rel_change : 1; 350 unsigned wr_rel_set : 1; 351 } user; 352 struct { 353 uint size; /* in 512-byte sectors */ 354 unsigned enhanced : 1; 355 unsigned wr_rel_change : 1; 356 unsigned wr_rel_set : 1; 357 } gp_part[4]; 358 }; 359 360 enum mmc_hwpart_conf_mode { 361 MMC_HWPART_CONF_CHECK, 362 MMC_HWPART_CONF_SET, 363 MMC_HWPART_CONF_COMPLETE, 364 }; 365 366 int mmc_register(struct mmc *mmc); 367 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv); 368 void mmc_destroy(struct mmc *mmc); 369 int mmc_initialize(bd_t *bis); 370 int mmc_init(struct mmc *mmc); 371 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); 372 void mmc_set_clock(struct mmc *mmc, uint clock); 373 struct mmc *find_mmc_device(int dev_num); 374 int mmc_set_dev(int dev_num); 375 void print_mmc_devices(char separator); 376 int get_mmc_num(void); 377 int mmc_switch_part(int dev_num, unsigned int part_num); 378 int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf, 379 enum mmc_hwpart_conf_mode mode); 380 int mmc_getcd(struct mmc *mmc); 381 int board_mmc_getcd(struct mmc *mmc); 382 int mmc_getwp(struct mmc *mmc); 383 int board_mmc_getwp(struct mmc *mmc); 384 int mmc_set_dsr(struct mmc *mmc, u16 val); 385 /* Function to change the size of boot partition and rpmb partitions */ 386 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, 387 unsigned long rpmbsize); 388 /* Function to modify the PARTITION_CONFIG field of EXT_CSD */ 389 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); 390 /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */ 391 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode); 392 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */ 393 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable); 394 /* Functions to read / write the RPMB partition */ 395 int mmc_rpmb_set_key(struct mmc *mmc, void *key); 396 int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter); 397 int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk, 398 unsigned short cnt, unsigned char *key); 399 int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk, 400 unsigned short cnt, unsigned char *key); 401 /** 402 * Start device initialization and return immediately; it does not block on 403 * polling OCR (operation condition register) status. Then you should call 404 * mmc_init, which would block on polling OCR status and complete the device 405 * initializatin. 406 * 407 * @param mmc Pointer to a MMC device struct 408 * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error. 409 */ 410 int mmc_start_init(struct mmc *mmc); 411 412 /** 413 * Set preinit flag of mmc device. 414 * 415 * This will cause the device to be pre-inited during mmc_initialize(), 416 * which may save boot time if the device is not accessed until later. 417 * Some eMMC devices take 200-300ms to init, but unfortunately they 418 * must be sent a series of commands to even get them to start preparing 419 * for operation. 420 * 421 * @param mmc Pointer to a MMC device struct 422 * @param preinit preinit flag value 423 */ 424 void mmc_set_preinit(struct mmc *mmc, int preinit); 425 426 #ifdef CONFIG_GENERIC_MMC 427 #ifdef CONFIG_MMC_SPI 428 #define mmc_host_is_spi(mmc) ((mmc)->cfg->host_caps & MMC_MODE_SPI) 429 #else 430 #define mmc_host_is_spi(mmc) 0 431 #endif 432 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); 433 #else 434 int mmc_legacy_init(int verbose); 435 #endif 436 437 void board_mmc_power_init(void); 438 int board_mmc_init(bd_t *bis); 439 int cpu_mmc_init(bd_t *bis); 440 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); 441 442 struct pci_device_id; 443 444 /** 445 * pci_mmc_init() - set up PCI MMC devices 446 * 447 * This finds all the matching PCI IDs and sets them up as MMC devices. 448 * 449 * @name: Name to use for devices 450 * @mmc_supported: PCI IDs to search for 451 * @num_ids: Number of elements in @mmc_supported 452 */ 453 int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported, 454 int num_ids); 455 456 /* Set block count limit because of 16 bit register limit on some hardware*/ 457 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT 458 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 459 #endif 460 461 #endif /* _MMC_H_ */ 462