1 /* 2 * Copyright 2008,2010 Freescale Semiconductor, Inc 3 * Andy Fleming 4 * 5 * Based (loosely) on the Linux code 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _MMC_H_ 11 #define _MMC_H_ 12 13 #include <linux/list.h> 14 #include <linux/sizes.h> 15 #include <linux/compiler.h> 16 #include <part.h> 17 18 /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */ 19 #define SD_VERSION_SD (1U << 31) 20 #define MMC_VERSION_MMC (1U << 30) 21 22 #define MAKE_SDMMC_VERSION(a, b, c) \ 23 ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c)) 24 #define MAKE_SD_VERSION(a, b, c) \ 25 (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c)) 26 #define MAKE_MMC_VERSION(a, b, c) \ 27 (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c)) 28 29 #define EXTRACT_SDMMC_MAJOR_VERSION(x) \ 30 (((u32)(x) >> 16) & 0xff) 31 #define EXTRACT_SDMMC_MINOR_VERSION(x) \ 32 (((u32)(x) >> 8) & 0xff) 33 #define EXTRACT_SDMMC_CHANGE_VERSION(x) \ 34 ((u32)(x) & 0xff) 35 36 #define SD_VERSION_3 MAKE_SD_VERSION(3, 0, 0) 37 #define SD_VERSION_2 MAKE_SD_VERSION(2, 0, 0) 38 #define SD_VERSION_1_0 MAKE_SD_VERSION(1, 0, 0) 39 #define SD_VERSION_1_10 MAKE_SD_VERSION(1, 10, 0) 40 41 #define MMC_VERSION_UNKNOWN MAKE_MMC_VERSION(0, 0, 0) 42 #define MMC_VERSION_1_2 MAKE_MMC_VERSION(1, 2, 0) 43 #define MMC_VERSION_1_4 MAKE_MMC_VERSION(1, 4, 0) 44 #define MMC_VERSION_2_2 MAKE_MMC_VERSION(2, 2, 0) 45 #define MMC_VERSION_3 MAKE_MMC_VERSION(3, 0, 0) 46 #define MMC_VERSION_4 MAKE_MMC_VERSION(4, 0, 0) 47 #define MMC_VERSION_4_1 MAKE_MMC_VERSION(4, 1, 0) 48 #define MMC_VERSION_4_2 MAKE_MMC_VERSION(4, 2, 0) 49 #define MMC_VERSION_4_3 MAKE_MMC_VERSION(4, 3, 0) 50 #define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1) 51 #define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0) 52 #define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0) 53 #define MMC_VERSION_5_1 MAKE_MMC_VERSION(5, 1, 0) 54 55 #define MMC_MODE_HS (1 << 0) 56 #define MMC_MODE_HS_52MHz (1 << 1) 57 #define MMC_MODE_4BIT (1 << 2) 58 #define MMC_MODE_8BIT (1 << 3) 59 #define MMC_MODE_SPI (1 << 4) 60 #define MMC_MODE_DDR_52MHz (1 << 5) 61 #define MMC_MODE_HS200 (1 << 6) 62 #define MMC_MODE_HS400 (1 << 7) 63 #define MMC_MODE_HS400ES (1 << 8) 64 65 #define SD_DATA_4BIT 0x00040000 66 67 #define IS_SD(x) ((x)->version & SD_VERSION_SD) 68 #define IS_MMC(x) ((x)->version & MMC_VERSION_MMC) 69 70 #define MMC_DATA_READ 1 71 #define MMC_DATA_WRITE 2 72 73 #define MMC_CMD_GO_IDLE_STATE 0 74 #define MMC_CMD_SEND_OP_COND 1 75 #define MMC_CMD_ALL_SEND_CID 2 76 #define MMC_CMD_SET_RELATIVE_ADDR 3 77 #define MMC_CMD_SET_DSR 4 78 #define MMC_CMD_SWITCH 6 79 #define MMC_CMD_SELECT_CARD 7 80 #define MMC_CMD_SEND_EXT_CSD 8 81 #define MMC_CMD_SEND_CSD 9 82 #define MMC_CMD_SEND_CID 10 83 #define MMC_CMD_STOP_TRANSMISSION 12 84 #define MMC_CMD_SEND_STATUS 13 85 #define MMC_CMD_SET_BLOCKLEN 16 86 #define MMC_CMD_READ_SINGLE_BLOCK 17 87 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 88 #define MMC_CMD_SET_BLOCK_COUNT 23 89 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 90 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 91 #define MMC_CMD_ERASE_GROUP_START 35 92 #define MMC_CMD_ERASE_GROUP_END 36 93 #define MMC_CMD_ERASE 38 94 #define MMC_CMD_APP_CMD 55 95 #define MMC_CMD_SPI_READ_OCR 58 96 #define MMC_CMD_SPI_CRC_ON_OFF 59 97 #define MMC_CMD_RES_MAN 62 98 99 #define MMC_CMD62_ARG1 0xefac62ec 100 #define MMC_CMD62_ARG2 0xcbaea7 101 102 103 #define SD_CMD_SEND_RELATIVE_ADDR 3 104 #define SD_CMD_SWITCH_FUNC 6 105 #define SD_CMD_SEND_IF_COND 8 106 #define SD_CMD_SWITCH_UHS18V 11 107 108 #define SD_CMD_APP_SET_BUS_WIDTH 6 109 #define SD_CMD_APP_SD_STATUS 13 110 #define SD_CMD_ERASE_WR_BLK_START 32 111 #define SD_CMD_ERASE_WR_BLK_END 33 112 #define SD_CMD_APP_SEND_OP_COND 41 113 #define SD_CMD_APP_SEND_SCR 51 114 115 /* SCR definitions in different words */ 116 #define SD_HIGHSPEED_BUSY 0x00020000 117 #define SD_HIGHSPEED_SUPPORTED 0x00020000 118 119 #define OCR_BUSY 0x80000000 120 #define OCR_HCS 0x40000000 121 #define OCR_VOLTAGE_MASK 0x007FFF80 122 #define OCR_ACCESS_MODE 0x60000000 123 124 #define MMC_ERASE_ARG 0x00000000 125 #define MMC_SECURE_ERASE_ARG 0x80000000 126 #define MMC_TRIM_ARG 0x00000001 127 #define MMC_DISCARD_ARG 0x00000003 128 #define MMC_SECURE_TRIM1_ARG 0x80000001 129 #define MMC_SECURE_TRIM2_ARG 0x80008000 130 131 #define MMC_STATUS_MASK (~0x0206BF7F) 132 #define MMC_STATUS_SWITCH_ERROR (1 << 7) 133 #define MMC_STATUS_RDY_FOR_DATA (1 << 8) 134 #define MMC_STATUS_CURR_STATE (0xf << 9) 135 #define MMC_STATUS_ERROR (1 << 19) 136 137 #define MMC_STATE_PRG (7 << 9) 138 139 #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ 140 #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ 141 #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ 142 #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ 143 #define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ 144 #define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ 145 #define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ 146 #define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ 147 #define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ 148 #define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ 149 #define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ 150 #define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ 151 #define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ 152 #define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ 153 #define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ 154 #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ 155 #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ 156 157 #define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ 158 #define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte 159 addressed by index which are 160 1 in value field */ 161 #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte 162 addressed by index, which are 163 1 in value field */ 164 #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */ 165 166 #define SD_SWITCH_CHECK 0 167 #define SD_SWITCH_SWITCH 1 168 169 /* 170 * EXT_CSD fields 171 */ 172 #define EXT_CSD_ENH_START_ADDR 136 /* R/W */ 173 #define EXT_CSD_ENH_SIZE_MULT 140 /* R/W */ 174 #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ 175 #define EXT_CSD_PARTITION_SETTING 155 /* R/W */ 176 #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */ 177 #define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */ 178 #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ 179 #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ 180 #define EXT_CSD_BKOPS_EN 163 /* R/W & R/W/E */ 181 #define EXT_CSD_WR_REL_PARAM 166 /* R */ 182 #define EXT_CSD_WR_REL_SET 167 /* R/W */ 183 #define EXT_CSD_RPMB_MULT 168 /* RO */ 184 #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ 185 #define EXT_CSD_BOOT_BUS_WIDTH 177 186 #define EXT_CSD_PART_CONF 179 /* R/W */ 187 #define EXT_CSD_BUS_WIDTH 183 /* R/W */ 188 #define EXT_CSD_STROBE_SUPPORT 184 /* RO */ 189 #define EXT_CSD_HS_TIMING 185 /* R/W */ 190 #define EXT_CSD_REV 192 /* RO */ 191 #define EXT_CSD_CARD_TYPE 196 /* RO */ 192 #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ 193 #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ 194 #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ 195 #define EXT_CSD_BOOT_MULT 226 /* RO */ 196 #define EXT_CSD_BKOPS_SUPPORT 502 /* RO */ 197 198 /* 199 * EXT_CSD field definitions 200 */ 201 202 #define EXT_CSD_CMD_SET_NORMAL (1 << 0) 203 #define EXT_CSD_CMD_SET_SECURE (1 << 1) 204 #define EXT_CSD_CMD_SET_CPSECURE (1 << 2) 205 206 #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ 207 #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ 208 #define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_26 | \ 209 EXT_CSD_CARD_TYPE_52) 210 #define EXT_CSD_CARD_TYPE_HS200_1_8V BIT(4) /* Card can run at 200MHz */ 211 #define EXT_CSD_CARD_TYPE_HS200_1_2V BIT(5) /* Card can run at 200MHz */ 212 #define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ 213 EXT_CSD_CARD_TYPE_HS200_1_2V) 214 #define EXT_CSD_CARD_TYPE_HS400_1_8V BIT(6) /* Card can run at 200MHz DDR, 1.8V */ 215 #define EXT_CSD_CARD_TYPE_HS400_1_2V BIT(7) /* Card can run at 200MHz DDR, 1.2V */ 216 #define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ 217 EXT_CSD_CARD_TYPE_HS400_1_2V) 218 #define EXT_CSD_CARD_TYPE_HS400ES BIT(8) /* Card can run at HS400ES */ 219 220 #define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2) 221 #define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3) 222 #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ 223 | EXT_CSD_CARD_TYPE_DDR_1_2V) 224 225 #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ 226 #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ 227 #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ 228 #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ 229 #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ 230 231 #define EXT_CSD_TIMING_BC 0 /* Backwards compatility */ 232 #define EXT_CSD_TIMING_HS 1 /* High speed */ 233 #define EXT_CSD_TIMING_HS200 2 /* HS200 */ 234 #define EXT_CSD_TIMING_HS400 3 /* HS400 */ 235 #define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */ 236 237 #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) 238 #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) 239 #define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0) 240 #define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0) 241 242 #define EXT_CSD_BOOT_ACK(x) (x << 6) 243 #define EXT_CSD_BOOT_PART_NUM(x) (x << 3) 244 #define EXT_CSD_PARTITION_ACCESS(x) (x << 0) 245 246 #define EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1) 247 #define EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7) 248 #define EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7) 249 250 #define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3) 251 #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) 252 #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x) 253 254 #define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0) 255 256 #define EXT_CSD_ENH_USR (1 << 0) /* user data area is enhanced */ 257 #define EXT_CSD_ENH_GP(x) (1 << ((x)+1)) /* GP part (x+1) is enhanced */ 258 259 #define EXT_CSD_HS_CTRL_REL (1 << 0) /* host controlled WR_REL_SET */ 260 261 #define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */ 262 #define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */ 263 264 #define R1_ILLEGAL_COMMAND (1 << 22) 265 #define R1_APP_CMD (1 << 5) 266 267 #define MMC_RSP_PRESENT (1 << 0) 268 #define MMC_RSP_136 (1 << 1) /* 136 bit response */ 269 #define MMC_RSP_CRC (1 << 2) /* expect valid crc */ 270 #define MMC_RSP_BUSY (1 << 3) /* card may send busy */ 271 #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ 272 273 #define MMC_RSP_NONE (0) 274 #define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 275 #define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \ 276 MMC_RSP_BUSY) 277 #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) 278 #define MMC_RSP_R3 (MMC_RSP_PRESENT) 279 #define MMC_RSP_R4 (MMC_RSP_PRESENT) 280 #define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 281 #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 282 #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 283 284 #define MMCPART_NOAVAILABLE (0xff) 285 #define PART_ACCESS_MASK (0x7) 286 #define PART_SUPPORT (0x1) 287 #define ENHNCD_SUPPORT (0x2) 288 #define PART_ENH_ATTRIB (0x1f) 289 290 /* Maximum block size for MMC */ 291 #define MMC_MAX_BLOCK_LEN 512 292 293 /* The number of MMC physical partitions. These consist of: 294 * boot partitions (2), general purpose partitions (4) in MMC v4.4. 295 */ 296 #define MMC_NUM_BOOT_PARTITION 2 297 #define MMC_PART_RPMB 3 /* RPMB partition number */ 298 299 /* Driver model support */ 300 301 /** 302 * struct mmc_uclass_priv - Holds information about a device used by the uclass 303 */ 304 struct mmc_uclass_priv { 305 struct mmc *mmc; 306 }; 307 308 /** 309 * mmc_get_mmc_dev() - get the MMC struct pointer for a device 310 * 311 * Provided that the device is already probed and ready for use, this value 312 * will be available. 313 * 314 * @dev: Device 315 * @return associated mmc struct pointer if available, else NULL 316 */ 317 struct mmc *mmc_get_mmc_dev(struct udevice *dev); 318 319 /* End of driver model support */ 320 321 struct mmc_cid { 322 unsigned long psn; 323 unsigned short oid; 324 unsigned char mid; 325 unsigned char prv; 326 unsigned char mdt; 327 char pnm[7]; 328 }; 329 330 struct mmc_cmd { 331 ushort cmdidx; 332 uint resp_type; 333 uint cmdarg; 334 uint response[4]; 335 }; 336 337 struct mmc_data { 338 union { 339 char *dest; 340 const char *src; /* src buffers don't get written to */ 341 }; 342 uint flags; 343 uint blocks; 344 uint blocksize; 345 }; 346 347 /* forward decl. */ 348 struct mmc; 349 350 #if CONFIG_IS_ENABLED(DM_MMC) 351 struct dm_mmc_ops { 352 /** 353 * send_cmd() - Send a command to the MMC device 354 * 355 * @dev: Device to receive the command 356 * @cmd: Command to send 357 * @data: Additional data to send/receive 358 * @return 0 if OK, -ve on error 359 */ 360 int (*send_cmd)(struct udevice *dev, struct mmc_cmd *cmd, 361 struct mmc_data *data); 362 363 /** 364 * card_busy() - Query the card device status 365 * 366 * @dev: Device to update 367 * @return true if card device is busy 368 */ 369 bool (*card_busy)(struct udevice *dev); 370 371 /** 372 * set_ios() - Set the I/O speed/width for an MMC device 373 * 374 * @dev: Device to update 375 * @return 0 if OK, -ve on error 376 */ 377 int (*set_ios)(struct udevice *dev); 378 379 /** 380 * get_cd() - See whether a card is present 381 * 382 * @dev: Device to check 383 * @return 0 if not present, 1 if present, -ve on error 384 */ 385 int (*get_cd)(struct udevice *dev); 386 387 /** 388 * get_wp() - See whether a card has write-protect enabled 389 * 390 * @dev: Device to check 391 * @return 0 if write-enabled, 1 if write-protected, -ve on error 392 */ 393 int (*get_wp)(struct udevice *dev); 394 }; 395 396 #define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops) 397 398 int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, 399 struct mmc_data *data); 400 int dm_mmc_set_ios(struct udevice *dev); 401 int dm_mmc_get_cd(struct udevice *dev); 402 int dm_mmc_get_wp(struct udevice *dev); 403 404 /* Transition functions for compatibility */ 405 bool mmc_card_busy(struct mmc *mmc); 406 bool mmc_can_card_busy(struct mmc *mmc); 407 int mmc_set_ios(struct mmc *mmc); 408 int mmc_getcd(struct mmc *mmc); 409 int mmc_getwp(struct mmc *mmc); 410 411 #else 412 struct mmc_ops { 413 bool (*card_busy)(struct mmc *mmc); 414 int (*send_cmd)(struct mmc *mmc, 415 struct mmc_cmd *cmd, struct mmc_data *data); 416 int (*set_ios)(struct mmc *mmc); 417 int (*init)(struct mmc *mmc); 418 int (*getcd)(struct mmc *mmc); 419 int (*getwp)(struct mmc *mmc); 420 }; 421 #endif 422 423 struct mmc_config { 424 const char *name; 425 #if !CONFIG_IS_ENABLED(DM_MMC) 426 const struct mmc_ops *ops; 427 #endif 428 uint host_caps; 429 uint voltages; 430 uint f_min; 431 uint f_max; 432 uint b_max; 433 unsigned char part_type; 434 }; 435 436 struct sd_ssr { 437 unsigned int au; /* In sectors */ 438 unsigned int erase_timeout; /* In milliseconds */ 439 unsigned int erase_offset; /* In milliseconds */ 440 }; 441 442 /* 443 * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device 444 * with mmc_get_mmc_dev(). 445 * 446 * TODO struct mmc should be in mmc_private but it's hard to fix right now 447 */ 448 struct mmc { 449 #if !CONFIG_IS_ENABLED(BLK) 450 struct list_head link; 451 #endif 452 const struct mmc_config *cfg; /* provided configuration */ 453 uint version; 454 void *priv; 455 uint has_init; 456 int high_capacity; 457 uint bus_width; 458 uint timing; 459 460 #define MMC_TIMING_LEGACY 0 461 #define MMC_TIMING_MMC_HS 1 462 #define MMC_TIMING_SD_HS 2 463 #define MMC_TIMING_UHS_SDR12 3 464 #define MMC_TIMING_UHS_SDR25 4 465 #define MMC_TIMING_UHS_SDR50 5 466 #define MMC_TIMING_UHS_SDR104 6 467 #define MMC_TIMING_UHS_DDR50 7 468 #define MMC_TIMING_MMC_DDR52 8 469 #define MMC_TIMING_MMC_HS200 9 470 #define MMC_TIMING_MMC_HS400 10 471 #define MMC_TIMING_MMC_HS400ES 11 472 473 uint clock; 474 uint card_caps; 475 uint ocr; 476 uint dsr; 477 uint dsr_imp; 478 uint scr[2]; 479 uint csd[4]; 480 uint cid[4]; 481 ushort rca; 482 u8 part_support; 483 u8 part_attr; 484 u8 wr_rel_set; 485 u8 part_config; 486 uint tran_speed; 487 uint read_bl_len; 488 uint write_bl_len; 489 uint erase_grp_size; /* in 512-byte sectors */ 490 uint hc_wp_grp_size; /* in 512-byte sectors */ 491 struct sd_ssr ssr; /* SD status register */ 492 u64 capacity; 493 u64 capacity_user; 494 u64 capacity_boot; 495 u64 capacity_rpmb; 496 u64 capacity_gp[4]; 497 u64 enh_user_start; 498 u64 enh_user_size; 499 #if !CONFIG_IS_ENABLED(BLK) 500 struct blk_desc block_dev; 501 #endif 502 char op_cond_pending; /* 1 if we are waiting on an op_cond command */ 503 char init_in_progress; /* 1 if we have done mmc_start_init() */ 504 char preinit; /* start init as early as possible */ 505 int ddr_mode; 506 #if CONFIG_IS_ENABLED(DM_MMC) 507 struct udevice *dev; /* Device for this MMC controller */ 508 #endif 509 }; 510 511 struct mmc_hwpart_conf { 512 struct { 513 uint enh_start; /* in 512-byte sectors */ 514 uint enh_size; /* in 512-byte sectors, if 0 no enh area */ 515 unsigned wr_rel_change : 1; 516 unsigned wr_rel_set : 1; 517 } user; 518 struct { 519 uint size; /* in 512-byte sectors */ 520 unsigned enhanced : 1; 521 unsigned wr_rel_change : 1; 522 unsigned wr_rel_set : 1; 523 } gp_part[4]; 524 }; 525 526 enum mmc_hwpart_conf_mode { 527 MMC_HWPART_CONF_CHECK, 528 MMC_HWPART_CONF_SET, 529 MMC_HWPART_CONF_COMPLETE, 530 }; 531 532 static inline bool mmc_card_hs(struct mmc *mmc) 533 { 534 return (mmc->timing == MMC_TIMING_MMC_HS) || 535 (mmc->timing == MMC_TIMING_SD_HS); 536 } 537 538 static inline bool mmc_card_ddr(struct mmc *mmc) 539 { 540 return (mmc->timing == MMC_TIMING_UHS_DDR50) || 541 (mmc->timing == MMC_TIMING_MMC_DDR52) || 542 (mmc->timing == MMC_TIMING_MMC_HS400) || 543 (mmc->timing == MMC_TIMING_MMC_HS400ES); 544 } 545 546 static inline bool mmc_card_hs200(struct mmc *mmc) 547 { 548 return mmc->timing == MMC_TIMING_MMC_HS200; 549 } 550 551 static inline bool mmc_card_ddr52(struct mmc *mmc) 552 { 553 return mmc->timing == MMC_TIMING_MMC_DDR52; 554 } 555 556 static inline bool mmc_card_hs400(struct mmc *mmc) 557 { 558 return mmc->timing == MMC_TIMING_MMC_HS400; 559 } 560 561 static inline bool mmc_card_hs400es(struct mmc *mmc) 562 { 563 return mmc->timing == MMC_TIMING_MMC_HS400ES; 564 } 565 566 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv); 567 568 /** 569 * mmc_bind() - Set up a new MMC device ready for probing 570 * 571 * A child block device is bound with the IF_TYPE_MMC interface type. This 572 * allows the device to be used with CONFIG_BLK 573 * 574 * @dev: MMC device to set up 575 * @mmc: MMC struct 576 * @cfg: MMC configuration 577 * @return 0 if OK, -ve on error 578 */ 579 int mmc_bind(struct udevice *dev, struct mmc *mmc, 580 const struct mmc_config *cfg); 581 void mmc_destroy(struct mmc *mmc); 582 583 /** 584 * mmc_unbind() - Unbind a MMC device's child block device 585 * 586 * @dev: MMC device 587 * @return 0 if OK, -ve on error 588 */ 589 int mmc_unbind(struct udevice *dev); 590 int mmc_initialize(bd_t *bis); 591 int mmc_init(struct mmc *mmc); 592 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); 593 void mmc_set_clock(struct mmc *mmc, uint clock); 594 struct mmc *find_mmc_device(int dev_num); 595 int mmc_set_dev(int dev_num); 596 void print_mmc_devices(char separator); 597 598 /** 599 * get_mmc_num() - get the total MMC device number 600 * 601 * @return 0 if there is no MMC device, else the number of devices 602 */ 603 int get_mmc_num(void); 604 int mmc_switch_part(struct mmc *mmc, unsigned int part_num); 605 int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf, 606 enum mmc_hwpart_conf_mode mode); 607 608 #if !CONFIG_IS_ENABLED(DM_MMC) 609 int mmc_getcd(struct mmc *mmc); 610 int board_mmc_getcd(struct mmc *mmc); 611 int mmc_getwp(struct mmc *mmc); 612 int board_mmc_getwp(struct mmc *mmc); 613 #endif 614 615 int mmc_set_dsr(struct mmc *mmc, u16 val); 616 /* Function to change the size of boot partition and rpmb partitions */ 617 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, 618 unsigned long rpmbsize); 619 /* Function to modify the PARTITION_CONFIG field of EXT_CSD */ 620 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); 621 /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */ 622 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode); 623 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */ 624 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable); 625 /* Functions to read / write the RPMB partition */ 626 int mmc_rpmb_set_key(struct mmc *mmc, void *key); 627 int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter); 628 int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk, 629 unsigned short cnt, unsigned char *key); 630 int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk, 631 unsigned short cnt, unsigned char *key); 632 #ifdef CONFIG_CMD_BKOPS_ENABLE 633 int mmc_set_bkops_enable(struct mmc *mmc); 634 #endif 635 636 /** 637 * Start device initialization and return immediately; it does not block on 638 * polling OCR (operation condition register) status. Then you should call 639 * mmc_init, which would block on polling OCR status and complete the device 640 * initializatin. 641 * 642 * @param mmc Pointer to a MMC device struct 643 * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error. 644 */ 645 int mmc_start_init(struct mmc *mmc); 646 647 /** 648 * Set preinit flag of mmc device. 649 * 650 * This will cause the device to be pre-inited during mmc_initialize(), 651 * which may save boot time if the device is not accessed until later. 652 * Some eMMC devices take 200-300ms to init, but unfortunately they 653 * must be sent a series of commands to even get them to start preparing 654 * for operation. 655 * 656 * @param mmc Pointer to a MMC device struct 657 * @param preinit preinit flag value 658 */ 659 void mmc_set_preinit(struct mmc *mmc, int preinit); 660 661 #ifdef CONFIG_MMC_SPI 662 #define mmc_host_is_spi(mmc) ((mmc)->cfg->host_caps & MMC_MODE_SPI) 663 #else 664 #define mmc_host_is_spi(mmc) 0 665 #endif 666 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); 667 668 void board_mmc_power_init(void); 669 int board_mmc_init(bd_t *bis); 670 int cpu_mmc_init(bd_t *bis); 671 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); 672 int mmc_get_env_dev(void); 673 674 /* Set block count limit because of 16 bit register limit on some hardware*/ 675 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT 676 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 677 #endif 678 679 /** 680 * mmc_get_blk_desc() - Get the block descriptor for an MMC device 681 * 682 * @mmc: MMC device 683 * @return block device if found, else NULL 684 */ 685 struct blk_desc *mmc_get_blk_desc(struct mmc *mmc); 686 687 #endif /* _MMC_H_ */ 688