1 /* 2 * (C) Copyright 2008 Semihalf 3 * 4 * (C) Copyright 2000-2005 5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 ******************************************************************** 9 * NOTE: This header file defines an interface to U-Boot. Including 10 * this (unmodified) header file in another file is considered normal 11 * use of U-Boot, and does *not* fall under the heading of "derived 12 * work". 13 ******************************************************************** 14 */ 15 16 #ifndef __IMAGE_H__ 17 #define __IMAGE_H__ 18 19 #include "compiler.h" 20 #include <asm/byteorder.h> 21 22 /* Define this to avoid #ifdefs later on */ 23 struct lmb; 24 25 #ifdef USE_HOSTCC 26 #include <sys/types.h> 27 28 /* new uImage format support enabled on host */ 29 #define IMAGE_ENABLE_FIT 1 30 #define IMAGE_ENABLE_OF_LIBFDT 1 31 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ 32 33 #define IMAGE_ENABLE_IGNORE 0 34 #define IMAGE_INDENT_STRING "" 35 36 #else 37 38 #include <lmb.h> 39 #include <asm/u-boot.h> 40 #include <command.h> 41 42 /* Take notice of the 'ignore' property for hashes */ 43 #define IMAGE_ENABLE_IGNORE 1 44 #define IMAGE_INDENT_STRING " " 45 46 #define IMAGE_ENABLE_FIT CONFIG_IS_ENABLED(FIT) 47 #define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT) 48 49 #endif /* USE_HOSTCC */ 50 51 #if IMAGE_ENABLE_FIT 52 #include <hash.h> 53 #include <libfdt.h> 54 #include <fdt_support.h> 55 # ifdef CONFIG_SPL_BUILD 56 # ifdef CONFIG_SPL_CRC32_SUPPORT 57 # define IMAGE_ENABLE_CRC32 1 58 # endif 59 # ifdef CONFIG_SPL_MD5_SUPPORT 60 # define IMAGE_ENABLE_MD5 1 61 # endif 62 # ifdef CONFIG_SPL_SHA1_SUPPORT 63 # define IMAGE_ENABLE_SHA1 1 64 # endif 65 # ifdef CONFIG_SPL_SHA256_SUPPORT 66 # define IMAGE_ENABLE_SHA256 1 67 # endif 68 # else 69 # define CONFIG_CRC32 /* FIT images need CRC32 support */ 70 # define CONFIG_MD5 /* and MD5 */ 71 # define CONFIG_SHA1 /* and SHA1 */ 72 # define CONFIG_SHA256 /* and SHA256 */ 73 # define IMAGE_ENABLE_CRC32 1 74 # define IMAGE_ENABLE_MD5 1 75 # define IMAGE_ENABLE_SHA1 1 76 # define IMAGE_ENABLE_SHA256 1 77 # endif 78 79 #ifdef CONFIG_FIT_DISABLE_SHA256 80 #undef CONFIG_SHA256 81 #undef IMAGE_ENABLE_SHA256 82 #endif 83 84 #ifndef IMAGE_ENABLE_CRC32 85 #define IMAGE_ENABLE_CRC32 0 86 #endif 87 88 #ifndef IMAGE_ENABLE_MD5 89 #define IMAGE_ENABLE_MD5 0 90 #endif 91 92 #ifndef IMAGE_ENABLE_SHA1 93 #define IMAGE_ENABLE_SHA1 0 94 #endif 95 96 #ifndef IMAGE_ENABLE_SHA256 97 #define IMAGE_ENABLE_SHA256 0 98 #endif 99 100 #endif /* IMAGE_ENABLE_FIT */ 101 102 #ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH 103 # define IMAGE_ENABLE_RAMDISK_HIGH 1 104 #else 105 # define IMAGE_ENABLE_RAMDISK_HIGH 0 106 #endif 107 108 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE 109 # define IMAGE_BOOT_GET_CMDLINE 1 110 #else 111 # define IMAGE_BOOT_GET_CMDLINE 0 112 #endif 113 114 #ifdef CONFIG_OF_BOARD_SETUP 115 # define IMAGE_OF_BOARD_SETUP 1 116 #else 117 # define IMAGE_OF_BOARD_SETUP 0 118 #endif 119 120 #ifdef CONFIG_OF_SYSTEM_SETUP 121 # define IMAGE_OF_SYSTEM_SETUP 1 122 #else 123 # define IMAGE_OF_SYSTEM_SETUP 0 124 #endif 125 126 /* 127 * Operating System Codes 128 */ 129 #define IH_OS_INVALID 0 /* Invalid OS */ 130 #define IH_OS_OPENBSD 1 /* OpenBSD */ 131 #define IH_OS_NETBSD 2 /* NetBSD */ 132 #define IH_OS_FREEBSD 3 /* FreeBSD */ 133 #define IH_OS_4_4BSD 4 /* 4.4BSD */ 134 #define IH_OS_LINUX 5 /* Linux */ 135 #define IH_OS_SVR4 6 /* SVR4 */ 136 #define IH_OS_ESIX 7 /* Esix */ 137 #define IH_OS_SOLARIS 8 /* Solaris */ 138 #define IH_OS_IRIX 9 /* Irix */ 139 #define IH_OS_SCO 10 /* SCO */ 140 #define IH_OS_DELL 11 /* Dell */ 141 #define IH_OS_NCR 12 /* NCR */ 142 #define IH_OS_LYNXOS 13 /* LynxOS */ 143 #define IH_OS_VXWORKS 14 /* VxWorks */ 144 #define IH_OS_PSOS 15 /* pSOS */ 145 #define IH_OS_QNX 16 /* QNX */ 146 #define IH_OS_U_BOOT 17 /* Firmware */ 147 #define IH_OS_RTEMS 18 /* RTEMS */ 148 #define IH_OS_ARTOS 19 /* ARTOS */ 149 #define IH_OS_UNITY 20 /* Unity OS */ 150 #define IH_OS_INTEGRITY 21 /* INTEGRITY */ 151 #define IH_OS_OSE 22 /* OSE */ 152 #define IH_OS_PLAN9 23 /* Plan 9 */ 153 #define IH_OS_OPENRTOS 24 /* OpenRTOS */ 154 155 /* 156 * CPU Architecture Codes (supported by Linux) 157 */ 158 #define IH_ARCH_INVALID 0 /* Invalid CPU */ 159 #define IH_ARCH_ALPHA 1 /* Alpha */ 160 #define IH_ARCH_ARM 2 /* ARM */ 161 #define IH_ARCH_I386 3 /* Intel x86 */ 162 #define IH_ARCH_IA64 4 /* IA64 */ 163 #define IH_ARCH_MIPS 5 /* MIPS */ 164 #define IH_ARCH_MIPS64 6 /* MIPS 64 Bit */ 165 #define IH_ARCH_PPC 7 /* PowerPC */ 166 #define IH_ARCH_S390 8 /* IBM S390 */ 167 #define IH_ARCH_SH 9 /* SuperH */ 168 #define IH_ARCH_SPARC 10 /* Sparc */ 169 #define IH_ARCH_SPARC64 11 /* Sparc 64 Bit */ 170 #define IH_ARCH_M68K 12 /* M68K */ 171 #define IH_ARCH_MICROBLAZE 14 /* MicroBlaze */ 172 #define IH_ARCH_NIOS2 15 /* Nios-II */ 173 #define IH_ARCH_BLACKFIN 16 /* Blackfin */ 174 #define IH_ARCH_AVR32 17 /* AVR32 */ 175 #define IH_ARCH_ST200 18 /* STMicroelectronics ST200 */ 176 #define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */ 177 #define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */ 178 #define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */ 179 #define IH_ARCH_ARM64 22 /* ARM64 */ 180 #define IH_ARCH_ARC 23 /* Synopsys DesignWare ARC */ 181 #define IH_ARCH_X86_64 24 /* AMD x86_64, Intel and Via */ 182 183 /* 184 * Image Types 185 * 186 * "Standalone Programs" are directly runnable in the environment 187 * provided by U-Boot; it is expected that (if they behave 188 * well) you can continue to work in U-Boot after return from 189 * the Standalone Program. 190 * "OS Kernel Images" are usually images of some Embedded OS which 191 * will take over control completely. Usually these programs 192 * will install their own set of exception handlers, device 193 * drivers, set up the MMU, etc. - this means, that you cannot 194 * expect to re-enter U-Boot except by resetting the CPU. 195 * "RAMDisk Images" are more or less just data blocks, and their 196 * parameters (address, size) are passed to an OS kernel that is 197 * being started. 198 * "Multi-File Images" contain several images, typically an OS 199 * (Linux) kernel image and one or more data images like 200 * RAMDisks. This construct is useful for instance when you want 201 * to boot over the network using BOOTP etc., where the boot 202 * server provides just a single image file, but you want to get 203 * for instance an OS kernel and a RAMDisk image. 204 * 205 * "Multi-File Images" start with a list of image sizes, each 206 * image size (in bytes) specified by an "uint32_t" in network 207 * byte order. This list is terminated by an "(uint32_t)0". 208 * Immediately after the terminating 0 follow the images, one by 209 * one, all aligned on "uint32_t" boundaries (size rounded up to 210 * a multiple of 4 bytes - except for the last file). 211 * 212 * "Firmware Images" are binary images containing firmware (like 213 * U-Boot or FPGA images) which usually will be programmed to 214 * flash memory. 215 * 216 * "Script files" are command sequences that will be executed by 217 * U-Boot's command interpreter; this feature is especially 218 * useful when you configure U-Boot to use a real shell (hush) 219 * as command interpreter (=> Shell Scripts). 220 */ 221 222 #define IH_TYPE_INVALID 0 /* Invalid Image */ 223 #define IH_TYPE_STANDALONE 1 /* Standalone Program */ 224 #define IH_TYPE_KERNEL 2 /* OS Kernel Image */ 225 #define IH_TYPE_RAMDISK 3 /* RAMDisk Image */ 226 #define IH_TYPE_MULTI 4 /* Multi-File Image */ 227 #define IH_TYPE_FIRMWARE 5 /* Firmware Image */ 228 #define IH_TYPE_SCRIPT 6 /* Script file */ 229 #define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */ 230 #define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */ 231 #define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */ 232 #define IH_TYPE_IMXIMAGE 10 /* Freescale IMXBoot Image */ 233 #define IH_TYPE_UBLIMAGE 11 /* Davinci UBL Image */ 234 #define IH_TYPE_OMAPIMAGE 12 /* TI OMAP Config Header Image */ 235 #define IH_TYPE_AISIMAGE 13 /* TI Davinci AIS Image */ 236 #define IH_TYPE_KERNEL_NOLOAD 14 /* OS Kernel Image, can run from any load address */ 237 #define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */ 238 #define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */ 239 #define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */ 240 #define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */ 241 #define IH_TYPE_SOCFPGAIMAGE 19 /* Altera SOCFPGA Preloader */ 242 #define IH_TYPE_X86_SETUP 20 /* x86 setup.bin Image */ 243 #define IH_TYPE_LPC32XXIMAGE 21 /* x86 setup.bin Image */ 244 #define IH_TYPE_LOADABLE 22 /* A list of typeless images */ 245 #define IH_TYPE_RKIMAGE 23 /* Rockchip Boot Image */ 246 #define IH_TYPE_RKSD 24 /* Rockchip SD card */ 247 #define IH_TYPE_RKSPI 25 /* Rockchip SPI image */ 248 #define IH_TYPE_ZYNQIMAGE 26 /* Xilinx Zynq Boot Image */ 249 #define IH_TYPE_ZYNQMPIMAGE 27 /* Xilinx ZynqMP Boot Image */ 250 251 #define IH_TYPE_COUNT 28 /* Number of image types */ 252 253 /* 254 * Compression Types 255 */ 256 #define IH_COMP_NONE 0 /* No Compression Used */ 257 #define IH_COMP_GZIP 1 /* gzip Compression Used */ 258 #define IH_COMP_BZIP2 2 /* bzip2 Compression Used */ 259 #define IH_COMP_LZMA 3 /* lzma Compression Used */ 260 #define IH_COMP_LZO 4 /* lzo Compression Used */ 261 #define IH_COMP_LZ4 5 /* lz4 Compression Used */ 262 263 #define IH_MAGIC 0x27051956 /* Image Magic Number */ 264 #define IH_NMLEN 32 /* Image Name Length */ 265 266 /* Reused from common.h */ 267 #define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1)) 268 269 /* 270 * Legacy format image header, 271 * all data in network byte order (aka natural aka bigendian). 272 */ 273 typedef struct image_header { 274 __be32 ih_magic; /* Image Header Magic Number */ 275 __be32 ih_hcrc; /* Image Header CRC Checksum */ 276 __be32 ih_time; /* Image Creation Timestamp */ 277 __be32 ih_size; /* Image Data Size */ 278 __be32 ih_load; /* Data Load Address */ 279 __be32 ih_ep; /* Entry Point Address */ 280 __be32 ih_dcrc; /* Image Data CRC Checksum */ 281 uint8_t ih_os; /* Operating System */ 282 uint8_t ih_arch; /* CPU architecture */ 283 uint8_t ih_type; /* Image Type */ 284 uint8_t ih_comp; /* Compression Type */ 285 uint8_t ih_name[IH_NMLEN]; /* Image Name */ 286 } image_header_t; 287 288 typedef struct image_info { 289 ulong start, end; /* start/end of blob */ 290 ulong image_start, image_len; /* start of image within blob, len of image */ 291 ulong load; /* load addr for the image */ 292 uint8_t comp, type, os; /* compression, type of image, os type */ 293 uint8_t arch; /* CPU architecture */ 294 } image_info_t; 295 296 /* 297 * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>() 298 * routines. 299 */ 300 typedef struct bootm_headers { 301 /* 302 * Legacy os image header, if it is a multi component image 303 * then boot_get_ramdisk() and get_fdt() will attempt to get 304 * data from second and third component accordingly. 305 */ 306 image_header_t *legacy_hdr_os; /* image header pointer */ 307 image_header_t legacy_hdr_os_copy; /* header copy */ 308 ulong legacy_hdr_valid; 309 310 #if IMAGE_ENABLE_FIT 311 const char *fit_uname_cfg; /* configuration node unit name */ 312 313 void *fit_hdr_os; /* os FIT image header */ 314 const char *fit_uname_os; /* os subimage node unit name */ 315 int fit_noffset_os; /* os subimage node offset */ 316 317 void *fit_hdr_rd; /* init ramdisk FIT image header */ 318 const char *fit_uname_rd; /* init ramdisk subimage node unit name */ 319 int fit_noffset_rd; /* init ramdisk subimage node offset */ 320 321 void *fit_hdr_fdt; /* FDT blob FIT image header */ 322 const char *fit_uname_fdt; /* FDT blob subimage node unit name */ 323 int fit_noffset_fdt;/* FDT blob subimage node offset */ 324 325 void *fit_hdr_setup; /* x86 setup FIT image header */ 326 const char *fit_uname_setup; /* x86 setup subimage node name */ 327 int fit_noffset_setup;/* x86 setup subimage node offset */ 328 #endif 329 330 #ifndef USE_HOSTCC 331 image_info_t os; /* os image info */ 332 ulong ep; /* entry point of OS */ 333 334 ulong rd_start, rd_end;/* ramdisk start/end */ 335 336 char *ft_addr; /* flat dev tree address */ 337 ulong ft_len; /* length of flat device tree */ 338 339 ulong initrd_start; 340 ulong initrd_end; 341 ulong cmdline_start; 342 ulong cmdline_end; 343 bd_t *kbd; 344 #endif 345 346 int verify; /* getenv("verify")[0] != 'n' */ 347 348 #define BOOTM_STATE_START (0x00000001) 349 #define BOOTM_STATE_FINDOS (0x00000002) 350 #define BOOTM_STATE_FINDOTHER (0x00000004) 351 #define BOOTM_STATE_LOADOS (0x00000008) 352 #define BOOTM_STATE_RAMDISK (0x00000010) 353 #define BOOTM_STATE_FDT (0x00000020) 354 #define BOOTM_STATE_OS_CMDLINE (0x00000040) 355 #define BOOTM_STATE_OS_BD_T (0x00000080) 356 #define BOOTM_STATE_OS_PREP (0x00000100) 357 #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */ 358 #define BOOTM_STATE_OS_GO (0x00000400) 359 int state; 360 361 #ifdef CONFIG_LMB 362 struct lmb lmb; /* for memory mgmt */ 363 #endif 364 } bootm_headers_t; 365 366 extern bootm_headers_t images; 367 368 /* 369 * Some systems (for example LWMON) have very short watchdog periods; 370 * we must make sure to split long operations like memmove() or 371 * checksum calculations into reasonable chunks. 372 */ 373 #ifndef CHUNKSZ 374 #define CHUNKSZ (64 * 1024) 375 #endif 376 377 #ifndef CHUNKSZ_CRC32 378 #define CHUNKSZ_CRC32 (64 * 1024) 379 #endif 380 381 #ifndef CHUNKSZ_MD5 382 #define CHUNKSZ_MD5 (64 * 1024) 383 #endif 384 385 #ifndef CHUNKSZ_SHA1 386 #define CHUNKSZ_SHA1 (64 * 1024) 387 #endif 388 389 #define uimage_to_cpu(x) be32_to_cpu(x) 390 #define cpu_to_uimage(x) cpu_to_be32(x) 391 392 /* 393 * Translation table for entries of a specific type; used by 394 * get_table_entry_id() and get_table_entry_name(). 395 */ 396 typedef struct table_entry { 397 int id; 398 char *sname; /* short (input) name to find table entry */ 399 char *lname; /* long (output) name to print for messages */ 400 } table_entry_t; 401 402 /* 403 * get_table_entry_id() scans the translation table trying to find an 404 * entry that matches the given short name. If a matching entry is 405 * found, it's id is returned to the caller. 406 */ 407 int get_table_entry_id(const table_entry_t *table, 408 const char *table_name, const char *name); 409 /* 410 * get_table_entry_name() scans the translation table trying to find 411 * an entry that matches the given id. If a matching entry is found, 412 * its long name is returned to the caller. 413 */ 414 char *get_table_entry_name(const table_entry_t *table, char *msg, int id); 415 416 const char *genimg_get_os_name(uint8_t os); 417 418 /** 419 * genimg_get_os_short_name() - get the short name for an OS 420 * 421 * @param os OS (IH_OS_...) 422 * @return OS short name, or "unknown" if unknown 423 */ 424 const char *genimg_get_os_short_name(uint8_t comp); 425 426 const char *genimg_get_arch_name(uint8_t arch); 427 428 /** 429 * genimg_get_arch_short_name() - get the short name for an architecture 430 * 431 * @param arch Architecture type (IH_ARCH_...) 432 * @return architecture short name, or "unknown" if unknown 433 */ 434 const char *genimg_get_arch_short_name(uint8_t arch); 435 436 const char *genimg_get_type_name(uint8_t type); 437 438 /** 439 * genimg_get_type_short_name() - get the short name for an image type 440 * 441 * @param type Image type (IH_TYPE_...) 442 * @return image short name, or "unknown" if unknown 443 */ 444 const char *genimg_get_type_short_name(uint8_t type); 445 446 const char *genimg_get_comp_name(uint8_t comp); 447 448 /** 449 * genimg_get_comp_short_name() - get the short name for a compression method 450 * 451 * @param comp compression method (IH_COMP_...) 452 * @return compression method short name, or "unknown" if unknown 453 */ 454 const char *genimg_get_comp_short_name(uint8_t comp); 455 456 int genimg_get_os_id(const char *name); 457 int genimg_get_arch_id(const char *name); 458 int genimg_get_type_id(const char *name); 459 int genimg_get_comp_id(const char *name); 460 void genimg_print_size(uint32_t size); 461 462 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ 463 defined(USE_HOSTCC) 464 #define IMAGE_ENABLE_TIMESTAMP 1 465 #else 466 #define IMAGE_ENABLE_TIMESTAMP 0 467 #endif 468 void genimg_print_time(time_t timestamp); 469 470 /* What to do with a image load address ('load = <> 'in the FIT) */ 471 enum fit_load_op { 472 FIT_LOAD_IGNORED, /* Ignore load address */ 473 FIT_LOAD_OPTIONAL, /* Can be provided, but optional */ 474 FIT_LOAD_OPTIONAL_NON_ZERO, /* Optional, a value of 0 is ignored */ 475 FIT_LOAD_REQUIRED, /* Must be provided */ 476 }; 477 478 int boot_get_setup(bootm_headers_t *images, uint8_t arch, ulong *setup_start, 479 ulong *setup_len); 480 481 #ifndef USE_HOSTCC 482 /* Image format types, returned by _get_format() routine */ 483 #define IMAGE_FORMAT_INVALID 0x00 484 #if defined(CONFIG_IMAGE_FORMAT_LEGACY) 485 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ 486 #endif 487 #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ 488 #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */ 489 490 ulong genimg_get_kernel_addr_fit(char * const img_addr, 491 const char **fit_uname_config, 492 const char **fit_uname_kernel); 493 ulong genimg_get_kernel_addr(char * const img_addr); 494 int genimg_get_format(const void *img_addr); 495 int genimg_has_config(bootm_headers_t *images); 496 ulong genimg_get_image(ulong img_addr); 497 498 int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, 499 uint8_t arch, ulong *rd_start, ulong *rd_end); 500 501 /** 502 * boot_get_loadable - routine to load a list of binaries to memory 503 * @argc: Ignored Argument 504 * @argv: Ignored Argument 505 * @images: pointer to the bootm images structure 506 * @arch: expected architecture for the image 507 * @ld_start: Ignored Argument 508 * @ld_len: Ignored Argument 509 * 510 * boot_get_loadable() will take the given FIT configuration, and look 511 * for a field named "loadables". Loadables, is a list of elements in 512 * the FIT given as strings. exe: 513 * loadables = "linux_kernel@1", "fdt@2"; 514 * this function will attempt to parse each string, and load the 515 * corresponding element from the FIT into memory. Once placed, 516 * no aditional actions are taken. 517 * 518 * @return: 519 * 0, if only valid images or no images are found 520 * error code, if an error occurs during fit_image_load 521 */ 522 int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images, 523 uint8_t arch, const ulong *ld_start, ulong * const ld_len); 524 #endif /* !USE_HOSTCC */ 525 526 int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch, 527 ulong *setup_start, ulong *setup_len); 528 529 /** 530 * fit_image_load() - load an image from a FIT 531 * 532 * This deals with all aspects of loading an image from a FIT, including 533 * selecting the right image based on configuration, verifying it, printing 534 * out progress messages, checking the type/arch/os and optionally copying it 535 * to the right load address. 536 * 537 * The property to look up is defined by image_type. 538 * 539 * @param images Boot images structure 540 * @param addr Address of FIT in memory 541 * @param fit_unamep On entry this is the requested image name 542 * (e.g. "kernel@1") or NULL to use the default. On exit 543 * points to the selected image name 544 * @param fit_uname_configp On entry this is the requested configuration 545 * name (e.g. "conf@1") or NULL to use the default. On 546 * exit points to the selected configuration name. 547 * @param arch Expected architecture (IH_ARCH_...) 548 * @param image_type Required image type (IH_TYPE_...). If this is 549 * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD 550 * also. 551 * @param bootstage_id ID of starting bootstage to use for progress updates. 552 * This will be added to the BOOTSTAGE_SUB values when 553 * calling bootstage_mark() 554 * @param load_op Decribes what to do with the load address 555 * @param datap Returns address of loaded image 556 * @param lenp Returns length of loaded image 557 * @return node offset of image, or -ve error code on error 558 */ 559 int fit_image_load(bootm_headers_t *images, ulong addr, 560 const char **fit_unamep, const char **fit_uname_configp, 561 int arch, int image_type, int bootstage_id, 562 enum fit_load_op load_op, ulong *datap, ulong *lenp); 563 564 #ifndef USE_HOSTCC 565 /** 566 * fit_get_node_from_config() - Look up an image a FIT by type 567 * 568 * This looks in the selected conf@ node (images->fit_uname_cfg) for a 569 * particular image type (e.g. "kernel") and then finds the image that is 570 * referred to. 571 * 572 * For example, for something like: 573 * 574 * images { 575 * kernel@1 { 576 * ... 577 * }; 578 * }; 579 * configurations { 580 * conf@1 { 581 * kernel = "kernel@1"; 582 * }; 583 * }; 584 * 585 * the function will return the node offset of the kernel@1 node, assuming 586 * that conf@1 is the chosen configuration. 587 * 588 * @param images Boot images structure 589 * @param prop_name Property name to look up (FIT_..._PROP) 590 * @param addr Address of FIT in memory 591 */ 592 int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, 593 ulong addr); 594 595 int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, 596 bootm_headers_t *images, 597 char **of_flat_tree, ulong *of_size); 598 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); 599 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); 600 601 int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, 602 ulong *initrd_start, ulong *initrd_end); 603 int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); 604 #ifdef CONFIG_SYS_BOOT_GET_KBD 605 int boot_get_kbd(struct lmb *lmb, bd_t **kbd); 606 #endif /* CONFIG_SYS_BOOT_GET_KBD */ 607 #endif /* !USE_HOSTCC */ 608 609 /*******************************************************************/ 610 /* Legacy format specific code (prefixed with image_) */ 611 /*******************************************************************/ 612 static inline uint32_t image_get_header_size(void) 613 { 614 return (sizeof(image_header_t)); 615 } 616 617 #define image_get_hdr_l(f) \ 618 static inline uint32_t image_get_##f(const image_header_t *hdr) \ 619 { \ 620 return uimage_to_cpu(hdr->ih_##f); \ 621 } 622 image_get_hdr_l(magic) /* image_get_magic */ 623 image_get_hdr_l(hcrc) /* image_get_hcrc */ 624 image_get_hdr_l(time) /* image_get_time */ 625 image_get_hdr_l(size) /* image_get_size */ 626 image_get_hdr_l(load) /* image_get_load */ 627 image_get_hdr_l(ep) /* image_get_ep */ 628 image_get_hdr_l(dcrc) /* image_get_dcrc */ 629 630 #define image_get_hdr_b(f) \ 631 static inline uint8_t image_get_##f(const image_header_t *hdr) \ 632 { \ 633 return hdr->ih_##f; \ 634 } 635 image_get_hdr_b(os) /* image_get_os */ 636 image_get_hdr_b(arch) /* image_get_arch */ 637 image_get_hdr_b(type) /* image_get_type */ 638 image_get_hdr_b(comp) /* image_get_comp */ 639 640 static inline char *image_get_name(const image_header_t *hdr) 641 { 642 return (char *)hdr->ih_name; 643 } 644 645 static inline uint32_t image_get_data_size(const image_header_t *hdr) 646 { 647 return image_get_size(hdr); 648 } 649 650 /** 651 * image_get_data - get image payload start address 652 * @hdr: image header 653 * 654 * image_get_data() returns address of the image payload. For single 655 * component images it is image data start. For multi component 656 * images it points to the null terminated table of sub-images sizes. 657 * 658 * returns: 659 * image payload data start address 660 */ 661 static inline ulong image_get_data(const image_header_t *hdr) 662 { 663 return ((ulong)hdr + image_get_header_size()); 664 } 665 666 static inline uint32_t image_get_image_size(const image_header_t *hdr) 667 { 668 return (image_get_size(hdr) + image_get_header_size()); 669 } 670 static inline ulong image_get_image_end(const image_header_t *hdr) 671 { 672 return ((ulong)hdr + image_get_image_size(hdr)); 673 } 674 675 #define image_set_hdr_l(f) \ 676 static inline void image_set_##f(image_header_t *hdr, uint32_t val) \ 677 { \ 678 hdr->ih_##f = cpu_to_uimage(val); \ 679 } 680 image_set_hdr_l(magic) /* image_set_magic */ 681 image_set_hdr_l(hcrc) /* image_set_hcrc */ 682 image_set_hdr_l(time) /* image_set_time */ 683 image_set_hdr_l(size) /* image_set_size */ 684 image_set_hdr_l(load) /* image_set_load */ 685 image_set_hdr_l(ep) /* image_set_ep */ 686 image_set_hdr_l(dcrc) /* image_set_dcrc */ 687 688 #define image_set_hdr_b(f) \ 689 static inline void image_set_##f(image_header_t *hdr, uint8_t val) \ 690 { \ 691 hdr->ih_##f = val; \ 692 } 693 image_set_hdr_b(os) /* image_set_os */ 694 image_set_hdr_b(arch) /* image_set_arch */ 695 image_set_hdr_b(type) /* image_set_type */ 696 image_set_hdr_b(comp) /* image_set_comp */ 697 698 static inline void image_set_name(image_header_t *hdr, const char *name) 699 { 700 strncpy(image_get_name(hdr), name, IH_NMLEN); 701 } 702 703 int image_check_hcrc(const image_header_t *hdr); 704 int image_check_dcrc(const image_header_t *hdr); 705 #ifndef USE_HOSTCC 706 ulong getenv_bootm_low(void); 707 phys_size_t getenv_bootm_size(void); 708 phys_size_t getenv_bootm_mapsize(void); 709 #endif 710 void memmove_wd(void *to, void *from, size_t len, ulong chunksz); 711 712 static inline int image_check_magic(const image_header_t *hdr) 713 { 714 return (image_get_magic(hdr) == IH_MAGIC); 715 } 716 static inline int image_check_type(const image_header_t *hdr, uint8_t type) 717 { 718 return (image_get_type(hdr) == type); 719 } 720 static inline int image_check_arch(const image_header_t *hdr, uint8_t arch) 721 { 722 return (image_get_arch(hdr) == arch); 723 } 724 static inline int image_check_os(const image_header_t *hdr, uint8_t os) 725 { 726 return (image_get_os(hdr) == os); 727 } 728 729 ulong image_multi_count(const image_header_t *hdr); 730 void image_multi_getimg(const image_header_t *hdr, ulong idx, 731 ulong *data, ulong *len); 732 733 void image_print_contents(const void *hdr); 734 735 #ifndef USE_HOSTCC 736 static inline int image_check_target_arch(const image_header_t *hdr) 737 { 738 #ifndef IH_ARCH_DEFAULT 739 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h" 740 #endif 741 return image_check_arch(hdr, IH_ARCH_DEFAULT); 742 } 743 #endif /* USE_HOSTCC */ 744 745 /** 746 * Set up properties in the FDT 747 * 748 * This sets up properties in the FDT that is to be passed to linux. 749 * 750 * @images: Images information 751 * @blob: FDT to update 752 * @of_size: Size of the FDT 753 * @lmb: Points to logical memory block structure 754 * @return 0 if ok, <0 on failure 755 */ 756 int image_setup_libfdt(bootm_headers_t *images, void *blob, 757 int of_size, struct lmb *lmb); 758 759 /** 760 * Set up the FDT to use for booting a kernel 761 * 762 * This performs ramdisk setup, sets up the FDT if required, and adds 763 * paramters to the FDT if libfdt is available. 764 * 765 * @param images Images information 766 * @return 0 if ok, <0 on failure 767 */ 768 int image_setup_linux(bootm_headers_t *images); 769 770 /** 771 * bootz_setup() - Extract stat and size of a Linux xImage 772 * 773 * @image: Address of image 774 * @start: Returns start address of image 775 * @end : Returns end address of image 776 * @return 0 if OK, 1 if the image was not recognised 777 */ 778 int bootz_setup(ulong image, ulong *start, ulong *end); 779 780 781 /*******************************************************************/ 782 /* New uImage format specific code (prefixed with fit_) */ 783 /*******************************************************************/ 784 785 #define FIT_IMAGES_PATH "/images" 786 #define FIT_CONFS_PATH "/configurations" 787 788 /* hash/signature node */ 789 #define FIT_HASH_NODENAME "hash" 790 #define FIT_ALGO_PROP "algo" 791 #define FIT_VALUE_PROP "value" 792 #define FIT_IGNORE_PROP "uboot-ignore" 793 #define FIT_SIG_NODENAME "signature" 794 795 /* image node */ 796 #define FIT_DATA_PROP "data" 797 #define FIT_TIMESTAMP_PROP "timestamp" 798 #define FIT_DESC_PROP "description" 799 #define FIT_ARCH_PROP "arch" 800 #define FIT_TYPE_PROP "type" 801 #define FIT_OS_PROP "os" 802 #define FIT_COMP_PROP "compression" 803 #define FIT_ENTRY_PROP "entry" 804 #define FIT_LOAD_PROP "load" 805 806 /* configuration node */ 807 #define FIT_KERNEL_PROP "kernel" 808 #define FIT_RAMDISK_PROP "ramdisk" 809 #define FIT_FDT_PROP "fdt" 810 #define FIT_LOADABLE_PROP "loadables" 811 #define FIT_DEFAULT_PROP "default" 812 #define FIT_SETUP_PROP "setup" 813 814 #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE 815 816 #if IMAGE_ENABLE_FIT 817 /* cmdline argument format parsing */ 818 int fit_parse_conf(const char *spec, ulong addr_curr, 819 ulong *addr, const char **conf_name); 820 int fit_parse_subimage(const char *spec, ulong addr_curr, 821 ulong *addr, const char **image_name); 822 823 int fit_get_subimage_count(const void *fit, int images_noffset); 824 void fit_print_contents(const void *fit); 825 void fit_image_print(const void *fit, int noffset, const char *p); 826 827 /** 828 * fit_get_end - get FIT image size 829 * @fit: pointer to the FIT format image header 830 * 831 * returns: 832 * size of the FIT image (blob) in memory 833 */ 834 static inline ulong fit_get_size(const void *fit) 835 { 836 return fdt_totalsize(fit); 837 } 838 839 /** 840 * fit_get_end - get FIT image end 841 * @fit: pointer to the FIT format image header 842 * 843 * returns: 844 * end address of the FIT image (blob) in memory 845 */ 846 ulong fit_get_end(const void *fit); 847 848 /** 849 * fit_get_name - get FIT node name 850 * @fit: pointer to the FIT format image header 851 * 852 * returns: 853 * NULL, on error 854 * pointer to node name, on success 855 */ 856 static inline const char *fit_get_name(const void *fit_hdr, 857 int noffset, int *len) 858 { 859 return fdt_get_name(fit_hdr, noffset, len); 860 } 861 862 int fit_get_desc(const void *fit, int noffset, char **desc); 863 int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp); 864 865 int fit_image_get_node(const void *fit, const char *image_uname); 866 int fit_image_get_os(const void *fit, int noffset, uint8_t *os); 867 int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch); 868 int fit_image_get_type(const void *fit, int noffset, uint8_t *type); 869 int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp); 870 int fit_image_get_load(const void *fit, int noffset, ulong *load); 871 int fit_image_get_entry(const void *fit, int noffset, ulong *entry); 872 int fit_image_get_data(const void *fit, int noffset, 873 const void **data, size_t *size); 874 875 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); 876 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, 877 int *value_len); 878 879 int fit_set_timestamp(void *fit, int noffset, time_t timestamp); 880 881 /** 882 * fit_add_verification_data() - add verification data to FIT image nodes 883 * 884 * @keydir: Directory containing keys 885 * @kwydest: FDT blob to write public key information to 886 * @fit: Pointer to the FIT format image header 887 * @comment: Comment to add to signature nodes 888 * @require_keys: Mark all keys as 'required' 889 * 890 * Adds hash values for all component images in the FIT blob. 891 * Hashes are calculated for all component images which have hash subnodes 892 * with algorithm property set to one of the supported hash algorithms. 893 * 894 * Also add signatures if signature nodes are present. 895 * 896 * returns 897 * 0, on success 898 * libfdt error code, on failure 899 */ 900 int fit_add_verification_data(const char *keydir, void *keydest, void *fit, 901 const char *comment, int require_keys); 902 903 int fit_image_verify(const void *fit, int noffset); 904 int fit_config_verify(const void *fit, int conf_noffset); 905 int fit_all_image_verify(const void *fit); 906 int fit_image_check_os(const void *fit, int noffset, uint8_t os); 907 int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); 908 int fit_image_check_type(const void *fit, int noffset, uint8_t type); 909 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp); 910 int fit_check_format(const void *fit); 911 912 int fit_conf_find_compat(const void *fit, const void *fdt); 913 int fit_conf_get_node(const void *fit, const char *conf_uname); 914 915 /** 916 * fit_conf_get_prop_node() - Get node refered to by a configuration 917 * @fit: FIT to check 918 * @noffset: Offset of conf@xxx node to check 919 * @prop_name: Property to read from the conf node 920 * 921 * The conf@ nodes contain references to other nodes, using properties 922 * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"), 923 * return the offset of the node referred to (e.g. offset of node 924 * "/images/kernel@1". 925 */ 926 int fit_conf_get_prop_node(const void *fit, int noffset, 927 const char *prop_name); 928 929 void fit_conf_print(const void *fit, int noffset, const char *p); 930 931 int fit_check_ramdisk(const void *fit, int os_noffset, 932 uint8_t arch, int verify); 933 934 int calculate_hash(const void *data, int data_len, const char *algo, 935 uint8_t *value, int *value_len); 936 937 /* 938 * At present we only support signing on the host, and verification on the 939 * device 940 */ 941 #if defined(CONFIG_FIT_SIGNATURE) 942 # ifdef USE_HOSTCC 943 # define IMAGE_ENABLE_SIGN 1 944 # define IMAGE_ENABLE_VERIFY 1 945 # include <openssl/evp.h> 946 #else 947 # define IMAGE_ENABLE_SIGN 0 948 # define IMAGE_ENABLE_VERIFY 1 949 # endif 950 #else 951 # define IMAGE_ENABLE_SIGN 0 952 # define IMAGE_ENABLE_VERIFY 0 953 #endif 954 955 #ifdef USE_HOSTCC 956 void *image_get_host_blob(void); 957 void image_set_host_blob(void *host_blob); 958 # define gd_fdt_blob() image_get_host_blob() 959 #else 960 # define gd_fdt_blob() (gd->fdt_blob) 961 #endif 962 963 #ifdef CONFIG_FIT_BEST_MATCH 964 #define IMAGE_ENABLE_BEST_MATCH 1 965 #else 966 #define IMAGE_ENABLE_BEST_MATCH 0 967 #endif 968 969 /* Information passed to the signing routines */ 970 struct image_sign_info { 971 const char *keydir; /* Directory conaining keys */ 972 const char *keyname; /* Name of key to use */ 973 void *fit; /* Pointer to FIT blob */ 974 int node_offset; /* Offset of signature node */ 975 struct image_sig_algo *algo; /* Algorithm information */ 976 const void *fdt_blob; /* FDT containing public keys */ 977 int required_keynode; /* Node offset of key to use: -1=any */ 978 const char *require_keys; /* Value for 'required' property */ 979 }; 980 #endif /* Allow struct image_region to always be defined for rsa.h */ 981 982 /* A part of an image, used for hashing */ 983 struct image_region { 984 const void *data; 985 int size; 986 }; 987 988 #if IMAGE_ENABLE_FIT 989 990 #if IMAGE_ENABLE_VERIFY 991 # include <u-boot/rsa-checksum.h> 992 #endif 993 struct checksum_algo { 994 const char *name; 995 const int checksum_len; 996 const int pad_len; 997 #if IMAGE_ENABLE_SIGN 998 const EVP_MD *(*calculate_sign)(void); 999 #endif 1000 int (*calculate)(const char *name, 1001 const struct image_region region[], 1002 int region_count, uint8_t *checksum); 1003 const uint8_t *rsa_padding; 1004 }; 1005 1006 struct image_sig_algo { 1007 const char *name; /* Name of algorithm */ 1008 1009 /** 1010 * sign() - calculate and return signature for given input data 1011 * 1012 * @info: Specifies key and FIT information 1013 * @data: Pointer to the input data 1014 * @data_len: Data length 1015 * @sigp: Set to an allocated buffer holding the signature 1016 * @sig_len: Set to length of the calculated hash 1017 * 1018 * This computes input data signature according to selected algorithm. 1019 * Resulting signature value is placed in an allocated buffer, the 1020 * pointer is returned as *sigp. The length of the calculated 1021 * signature is returned via the sig_len pointer argument. The caller 1022 * should free *sigp. 1023 * 1024 * @return: 0, on success, -ve on error 1025 */ 1026 int (*sign)(struct image_sign_info *info, 1027 const struct image_region region[], 1028 int region_count, uint8_t **sigp, uint *sig_len); 1029 1030 /** 1031 * add_verify_data() - Add verification information to FDT 1032 * 1033 * Add public key information to the FDT node, suitable for 1034 * verification at run-time. The information added depends on the 1035 * algorithm being used. 1036 * 1037 * @info: Specifies key and FIT information 1038 * @keydest: Destination FDT blob for public key data 1039 * @return: 0, on success, -ve on error 1040 */ 1041 int (*add_verify_data)(struct image_sign_info *info, void *keydest); 1042 1043 /** 1044 * verify() - Verify a signature against some data 1045 * 1046 * @info: Specifies key and FIT information 1047 * @data: Pointer to the input data 1048 * @data_len: Data length 1049 * @sig: Signature 1050 * @sig_len: Number of bytes in signature 1051 * @return 0 if verified, -ve on error 1052 */ 1053 int (*verify)(struct image_sign_info *info, 1054 const struct image_region region[], int region_count, 1055 uint8_t *sig, uint sig_len); 1056 1057 /* pointer to checksum algorithm */ 1058 struct checksum_algo *checksum; 1059 }; 1060 1061 /** 1062 * image_get_sig_algo() - Look up a signature algortihm 1063 * 1064 * @param name Name of algorithm 1065 * @return pointer to algorithm information, or NULL if not found 1066 */ 1067 struct image_sig_algo *image_get_sig_algo(const char *name); 1068 1069 /** 1070 * fit_image_verify_required_sigs() - Verify signatures marked as 'required' 1071 * 1072 * @fit: FIT to check 1073 * @image_noffset: Offset of image node to check 1074 * @data: Image data to check 1075 * @size: Size of image data 1076 * @sig_blob: FDT containing public keys 1077 * @no_sigsp: Returns 1 if no signatures were required, and 1078 * therefore nothing was checked. The caller may wish 1079 * to fall back to other mechanisms, or refuse to 1080 * boot. 1081 * @return 0 if all verified ok, <0 on error 1082 */ 1083 int fit_image_verify_required_sigs(const void *fit, int image_noffset, 1084 const char *data, size_t size, const void *sig_blob, 1085 int *no_sigsp); 1086 1087 /** 1088 * fit_image_check_sig() - Check a single image signature node 1089 * 1090 * @fit: FIT to check 1091 * @noffset: Offset of signature node to check 1092 * @data: Image data to check 1093 * @size: Size of image data 1094 * @required_keynode: Offset in the control FDT of the required key node, 1095 * if any. If this is given, then the image wil not 1096 * pass verification unless that key is used. If this is 1097 * -1 then any signature will do. 1098 * @err_msgp: In the event of an error, this will be pointed to a 1099 * help error string to display to the user. 1100 * @return 0 if all verified ok, <0 on error 1101 */ 1102 int fit_image_check_sig(const void *fit, int noffset, const void *data, 1103 size_t size, int required_keynode, char **err_msgp); 1104 1105 /** 1106 * fit_region_make_list() - Make a list of regions to hash 1107 * 1108 * Given a list of FIT regions (offset, size) provided by libfdt, create 1109 * a list of regions (void *, size) for use by the signature creationg 1110 * and verification code. 1111 * 1112 * @fit: FIT image to process 1113 * @fdt_regions: Regions as returned by libfdt 1114 * @count: Number of regions returned by libfdt 1115 * @region: Place to put list of regions (NULL to allocate it) 1116 * @return pointer to list of regions, or NULL if out of memory 1117 */ 1118 struct image_region *fit_region_make_list(const void *fit, 1119 struct fdt_region *fdt_regions, int count, 1120 struct image_region *region); 1121 1122 static inline int fit_image_check_target_arch(const void *fdt, int node) 1123 { 1124 #ifndef USE_HOSTCC 1125 return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT); 1126 #else 1127 return 0; 1128 #endif 1129 } 1130 1131 #ifdef CONFIG_FIT_VERBOSE 1132 #define fit_unsupported(msg) printf("! %s:%d " \ 1133 "FIT images not supported for '%s'\n", \ 1134 __FILE__, __LINE__, (msg)) 1135 1136 #define fit_unsupported_reset(msg) printf("! %s:%d " \ 1137 "FIT images not supported for '%s' " \ 1138 "- must reset board to recover!\n", \ 1139 __FILE__, __LINE__, (msg)) 1140 #else 1141 #define fit_unsupported(msg) 1142 #define fit_unsupported_reset(msg) 1143 #endif /* CONFIG_FIT_VERBOSE */ 1144 #endif /* CONFIG_FIT */ 1145 1146 #if defined(CONFIG_ANDROID_BOOT_IMAGE) 1147 struct andr_img_hdr; 1148 int android_image_check_header(const struct andr_img_hdr *hdr); 1149 int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify, 1150 ulong *os_data, ulong *os_len); 1151 int android_image_get_ramdisk(const struct andr_img_hdr *hdr, 1152 ulong *rd_data, ulong *rd_len); 1153 ulong android_image_get_end(const struct andr_img_hdr *hdr); 1154 ulong android_image_get_kload(const struct andr_img_hdr *hdr); 1155 1156 #endif /* CONFIG_ANDROID_BOOT_IMAGE */ 1157 1158 /** 1159 * board_fit_config_name_match() - Check for a matching board name 1160 * 1161 * This is used when SPL loads a FIT containing multiple device tree files 1162 * and wants to work out which one to use. The description of each one is 1163 * passed to this function. The description comes from the 'description' field 1164 * in each (FDT) image node. 1165 * 1166 * @name: Device tree description 1167 * @return 0 if this device tree should be used, non-zero to try the next 1168 */ 1169 int board_fit_config_name_match(const char *name); 1170 1171 #endif /* __IMAGE_H__ */ 1172