1 /* 2 * Copyright (C) 2012-2015 Panasonic Corporation 3 * Copyright (C) 2015-2016 Socionext Inc. 4 * Author: Masahiro Yamada <yamada.masahiro@socionext.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 /* U-Boot - Common settings for UniPhier Family */ 10 11 #ifndef __CONFIG_UNIPHIER_COMMON_H__ 12 #define __CONFIG_UNIPHIER_COMMON_H__ 13 14 #define CONFIG_ARMV7_PSCI_1_0 15 16 /*----------------------------------------------------------------------- 17 * MMU and Cache Setting 18 *----------------------------------------------------------------------*/ 19 20 /* Comment out the following to enable L1 cache */ 21 /* #define CONFIG_SYS_ICACHE_OFF */ 22 /* #define CONFIG_SYS_DCACHE_OFF */ 23 24 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 25 26 #define CONFIG_TIMESTAMP 27 28 /* FLASH related */ 29 #define CONFIG_MTD_DEVICE 30 31 #define CONFIG_SMC911X_32_BIT 32 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */ 33 #define CONFIG_SMC911X_BASE 0 34 35 #ifdef CONFIG_MICRO_SUPPORT_CARD 36 #define CONFIG_SMC911X 37 #endif 38 39 #define CONFIG_FLASH_CFI_DRIVER 40 #define CONFIG_SYS_FLASH_CFI 41 42 #define CONFIG_SYS_MAX_FLASH_SECT 256 43 #define CONFIG_SYS_MONITOR_BASE 0 44 #define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */ 45 #define CONFIG_SYS_FLASH_BASE 0 46 47 /* 48 * flash_toggle does not work for our support card. 49 * We need to use flash_status_poll. 50 */ 51 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL 52 53 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 54 55 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 56 57 /* serial console configuration */ 58 59 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 60 61 #define CONFIG_CMDLINE_EDITING /* add command line history */ 62 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 63 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 64 /* Boot Argument Buffer Size */ 65 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 66 67 #define CONFIG_CONS_INDEX 1 68 69 #define CONFIG_ENV_OFFSET 0x100000 70 #define CONFIG_ENV_SIZE 0x2000 71 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ 72 73 #define CONFIG_SYS_MMC_ENV_DEV 0 74 #define CONFIG_SYS_MMC_ENV_PART 1 75 76 #if !defined(CONFIG_ARM64) 77 /* Time clock 1MHz */ 78 #define CONFIG_SYS_TIMER_RATE 1000000 79 #endif 80 81 #define CONFIG_SYS_MAX_NAND_DEVICE 1 82 #define CONFIG_SYS_NAND_ONFI_DETECTION 83 84 #define CONFIG_NAND_DENALI_ECC_SIZE 1024 85 86 #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 87 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 88 89 #define CONFIG_SYS_NAND_USE_FLASH_BBT 90 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 91 92 /* SD/MMC */ 93 #define CONFIG_SUPPORT_EMMC_BOOT 94 95 /* memtest works on */ 96 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 97 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) 98 99 /* 100 * Network Configuration 101 */ 102 #define CONFIG_SERVERIP 192.168.11.1 103 #define CONFIG_IPADDR 192.168.11.10 104 #define CONFIG_GATEWAYIP 192.168.11.1 105 #define CONFIG_NETMASK 255.255.255.0 106 107 #define CONFIG_LOADADDR 0x84000000 108 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 109 110 #define CONFIG_CMDLINE_EDITING /* add command line history */ 111 112 #if defined(CONFIG_ARM64) 113 /* ARM Trusted Firmware */ 114 #define BOOT_IMAGES \ 115 "second_image=unph_bl.bin\0" \ 116 "third_image=fip.bin\0" 117 #else 118 #define BOOT_IMAGES \ 119 "second_image=u-boot-spl.bin\0" \ 120 "third_image=u-boot.bin\0" 121 #endif 122 123 #define CONFIG_BOOTCOMMAND "run $bootmode" 124 125 #define CONFIG_ROOTPATH "/nfs/root/path" 126 #define CONFIG_NFSBOOTCOMMAND \ 127 "setenv bootargs $bootargs root=/dev/nfs rw " \ 128 "nfsroot=$serverip:$rootpath " \ 129 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ 130 "run __nfsboot" 131 132 #ifdef CONFIG_FIT 133 #define CONFIG_BOOTFILE "fitImage" 134 #define LINUXBOOT_ENV_SETTINGS \ 135 "fit_addr=0x00100000\0" \ 136 "fit_addr_r=0x84100000\0" \ 137 "fit_size=0x00f00000\0" \ 138 "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \ 139 "bootm $fit_addr\0" \ 140 "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \ 141 "bootm $fit_addr_r\0" \ 142 "tftpboot=tftpboot $fit_addr_r $bootfile &&" \ 143 "bootm $fit_addr_r\0" \ 144 "__nfsboot=run tftpboot\0" 145 #else 146 #ifdef CONFIG_ARM64 147 #define CONFIG_BOOTFILE "Image.gz" 148 #define LINUXBOOT_CMD "booti" 149 #define KERNEL_ADDR_LOAD "kernel_addr_load=0x84200000\0" 150 #define KERNEL_ADDR_R "kernel_addr_r=0x82080000\0" 151 #else 152 #define CONFIG_BOOTFILE "zImage" 153 #define LINUXBOOT_CMD "bootz" 154 #define KERNEL_ADDR_LOAD "kernel_addr_load=0x80208000\0" 155 #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" 156 #endif 157 #define LINUXBOOT_ENV_SETTINGS \ 158 "fdt_addr=0x00100000\0" \ 159 "fdt_addr_r=0x84100000\0" \ 160 "fdt_size=0x00008000\0" \ 161 "kernel_addr=0x00200000\0" \ 162 KERNEL_ADDR_LOAD \ 163 KERNEL_ADDR_R \ 164 "kernel_size=0x00800000\0" \ 165 "ramdisk_addr=0x00a00000\0" \ 166 "ramdisk_addr_r=0x84a00000\0" \ 167 "ramdisk_size=0x00600000\0" \ 168 "ramdisk_file=rootfs.cpio.uboot\0" \ 169 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \ 170 "if test $kernel_addr_load = $kernel_addr_r; then " \ 171 "true; " \ 172 "else " \ 173 "unzip $kernel_addr_load $kernel_addr_r; " \ 174 "fi && " \ 175 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ 176 "norboot=setexpr kernel_addr_nor $nor_base + $kernel_addr && " \ 177 "setexpr kernel_size_div4 $kernel_size / 4 && " \ 178 "cp $kernel_addr_nor $kernel_addr_load $kernel_size_div4 && " \ 179 "setexpr ramdisk_addr_nor $nor_base + $ramdisk_addr && " \ 180 "setexpr ramdisk_size_div4 $ramdisk_size / 4 && " \ 181 "cp $ramdisk_addr_nor $ramdisk_addr_r $ramdisk_size_div4 && " \ 182 "setexpr fdt_addr_nor $nor_base + $fdt_addr && " \ 183 "setexpr fdt_size_div4 $fdt_size / 4 && " \ 184 "cp $fdt_addr_nor $fdt_addr_r $fdt_size_div4 && " \ 185 "run boot_common\0" \ 186 "nandboot=nand read $kernel_addr_load $kernel_addr $kernel_size && " \ 187 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ 188 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ 189 "run boot_common\0" \ 190 "tftpboot=tftpboot $kernel_addr_load $bootfile && " \ 191 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ 192 "tftpboot $fdt_addr_r $fdt_file &&" \ 193 "run boot_common\0" \ 194 "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \ 195 "tftpboot $fdt_addr_r $fdt_file &&" \ 196 "setenv ramdisk_addr_r - &&" \ 197 "run boot_common\0" 198 #endif 199 200 #define CONFIG_EXTRA_ENV_SETTINGS \ 201 "netdev=eth0\0" \ 202 "verify=n\0" \ 203 "initrd_high=0xffffffffffffffff\0" \ 204 "nor_base=0x42000000\0" \ 205 "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ 206 "tftpboot $tmp_addr $second_image && " \ 207 "setexpr tmp_addr $nor_base + 0x70000 && " \ 208 "tftpboot $tmp_addr $third_image\0" \ 209 "emmcupdate=mmcsetn &&" \ 210 "mmc partconf $mmc_first_dev 0 1 1 &&" \ 211 "tftpboot $second_image && " \ 212 "mmc write $loadaddr 0 100 && " \ 213 "tftpboot $third_image && " \ 214 "mmc write $loadaddr 100 700\0" \ 215 "nandupdate=nand erase 0 0x00100000 &&" \ 216 "tftpboot $second_image && " \ 217 "nand write $loadaddr 0 0x00020000 && " \ 218 "tftpboot $third_image && " \ 219 "nand write $loadaddr 0x00020000 0x000e0000\0" \ 220 "usbupdate=usb start &&" \ 221 "tftpboot $second_image && " \ 222 "usb write $loadaddr 0 100 && " \ 223 "tftpboot $third_image && " \ 224 "usb write $loadaddr 100 700\0" \ 225 BOOT_IMAGES \ 226 LINUXBOOT_ENV_SETTINGS 227 228 #define CONFIG_SYS_BOOTMAPSZ 0x20000000 229 230 #define CONFIG_SYS_SDRAM_BASE 0x80000000 231 #define CONFIG_NR_DRAM_BANKS 3 232 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ 233 #define CONFIG_SYS_MEM_TOP_HIDE 64 234 235 #define CONFIG_PANIC_HANG 236 237 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) 238 239 /* only for SPL */ 240 #if defined(CONFIG_ARCH_UNIPHIER_LD4) || \ 241 defined(CONFIG_ARCH_UNIPHIER_SLD8) 242 #define CONFIG_SPL_TEXT_BASE 0x00040000 243 #else 244 #define CONFIG_SPL_TEXT_BASE 0x00100000 245 #endif 246 247 #define CONFIG_SPL_STACK (0x00100000) 248 249 #define CONFIG_SPL_FRAMEWORK 250 251 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 252 253 /* subtract sizeof(struct image_header) */ 254 #define CONFIG_SYS_UBOOT_BASE (0x70000 - 0x40) 255 256 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 257 #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 258 #define CONFIG_SPL_MAX_SIZE 0x10000 259 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 260 261 #define CONFIG_SPL_PAD_TO 0x20000 262 263 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ 264