1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * (C) Copyright 2012 8 * Corscience GmbH & Co. KG 9 * Thomas Weber <weber@corscience.de> 10 * 11 * Configuration settings for the Tricorder board. 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 #ifndef __CONFIG_H 17 #define __CONFIG_H 18 19 /* High Level Configuration Options */ 20 #define CONFIG_OMAP /* in a TI OMAP core */ 21 #define CONFIG_OMAP34XX /* which is a 34XX */ 22 #define CONFIG_OMAP_COMMON 23 24 #define CONFIG_MACH_TYPE MACH_TYPE_TRICORDER 25 /* 26 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 27 * 64 bytes before this address should be set aside for u-boot.img's 28 * header. That is 0x800FFFC0--0x80100000 should not be used for any 29 * other needs. 30 */ 31 #define CONFIG_SYS_TEXT_BASE 0x80100000 32 33 #define CONFIG_SDRC /* The chip has SDRC controller */ 34 35 #include <asm/arch/cpu.h> /* get chip and board defs */ 36 #include <asm/arch/omap3.h> 37 38 /* Display CPU and Board information */ 39 #define CONFIG_DISPLAY_CPUINFO 40 #define CONFIG_DISPLAY_BOARDINFO 41 42 /* Clock Defines */ 43 #define V_OSCK 26000000 /* Clock output from T2 */ 44 #define V_SCLK (V_OSCK >> 1) 45 46 #define CONFIG_MISC_INIT_R 47 48 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 49 #define CONFIG_SETUP_MEMORY_TAGS 50 #define CONFIG_INITRD_TAG 51 #define CONFIG_REVISION_TAG 52 53 #define CONFIG_OF_LIBFDT 54 55 /* Size of malloc() pool */ 56 #define CONFIG_SYS_MALLOC_LEN (1024*1024) 57 58 /* Hardware drivers */ 59 60 /* GPIO support */ 61 #define CONFIG_OMAP_GPIO 62 63 /* LED support */ 64 #define CONFIG_STATUS_LED 65 #define CONFIG_BOARD_SPECIFIC_LED 66 #define CONFIG_CMD_LED /* LED command */ 67 #define STATUS_LED_BIT (1 << 0) 68 #define STATUS_LED_STATE STATUS_LED_ON 69 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) 70 #define STATUS_LED_BIT1 (1 << 1) 71 #define STATUS_LED_STATE1 STATUS_LED_ON 72 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) 73 #define STATUS_LED_BIT2 (1 << 2) 74 #define STATUS_LED_STATE2 STATUS_LED_ON 75 #define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) 76 77 /* NS16550 Configuration */ 78 #define CONFIG_SYS_NS16550 79 #define CONFIG_SYS_NS16550_SERIAL 80 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 81 #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 82 83 /* select serial console configuration */ 84 #define CONFIG_CONS_INDEX 3 85 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 86 #define CONFIG_SERIAL3 3 87 #define CONFIG_BAUDRATE 115200 88 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 89 115200} 90 91 /* MMC */ 92 #define CONFIG_GENERIC_MMC 93 #define CONFIG_MMC 94 #define CONFIG_OMAP_HSMMC 95 #define CONFIG_DOS_PARTITION 96 97 /* I2C */ 98 #define CONFIG_HARD_I2C 99 #define CONFIG_SYS_I2C_SPEED 100000 100 #define CONFIG_SYS_I2C_SLAVE 1 101 #define CONFIG_DRIVER_OMAP34XX_I2C 1 102 #define CONFIG_I2C_MULTI_BUS 103 104 /* EEPROM */ 105 #define CONFIG_SYS_I2C_MULTI_EEPROMS 106 #define CONFIG_CMD_EEPROM 107 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 108 #define CONFIG_SYS_EEPROM_BUS_NUM 1 109 110 /* TWL4030 */ 111 #define CONFIG_TWL4030_POWER 112 #define CONFIG_TWL4030_LED 113 114 /* Board NAND Info */ 115 #define CONFIG_SYS_NO_FLASH /* no NOR flash */ 116 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 117 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 118 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \ 119 "128k(SPL)," \ 120 "1m(u-boot)," \ 121 "384k(u-boot-env1)," \ 122 "1152k(mtdoops)," \ 123 "384k(u-boot-env2)," \ 124 "5m(kernel)," \ 125 "2m(fdt)," \ 126 "-(ubi)" 127 128 #define CONFIG_NAND_OMAP_GPMC 129 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 130 /* to access nand */ 131 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 132 /* to access nand at */ 133 /* CS0 */ 134 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 135 136 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 137 /* devices */ 138 #define CONFIG_NAND_OMAP_BCH8 139 #define CONFIG_BCH 140 141 /* commands to include */ 142 #include <config_cmd_default.h> 143 144 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 145 #define CONFIG_CMD_FAT /* FAT support */ 146 #define CONFIG_CMD_I2C /* I2C serial bus support */ 147 #define CONFIG_CMD_MMC /* MMC support */ 148 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 149 #define CONFIG_CMD_NAND /* NAND support */ 150 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ 151 #define CONFIG_CMD_UBI /* UBI commands */ 152 #define CONFIG_CMD_UBIFS /* UBIFS commands */ 153 #define CONFIG_LZO /* LZO is needed for UBIFS */ 154 155 #undef CONFIG_CMD_NET 156 #undef CONFIG_CMD_NFS 157 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 158 #undef CONFIG_CMD_IMI /* iminfo */ 159 #undef CONFIG_CMD_JFFS2 /* JFFS2 Support */ 160 161 /* needed for ubi */ 162 #define CONFIG_RBTREE 163 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 164 #define CONFIG_MTD_PARTITIONS 165 166 /* Environment information (this is the common part) */ 167 168 #define CONFIG_BOOTDELAY 3 169 170 /* hang() the board on panic() */ 171 #define CONFIG_PANIC_HANG 172 173 /* environment placement (for NAND), is different for FLASHCARD but does not 174 * harm there */ 175 #define CONFIG_ENV_OFFSET 0x120000 /* env start */ 176 #define CONFIG_ENV_OFFSET_REDUND 0x2A0000 /* redundant env start */ 177 #define CONFIG_ENV_SIZE (16 << 10) /* use 16KiB for env */ 178 #define CONFIG_ENV_RANGE (384 << 10) /* allow badblocks in env */ 179 180 /* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend 181 * value can not be used here! */ 182 #define CONFIG_LOADADDR 0x82000000 183 184 #define CONFIG_COMMON_ENV_SETTINGS \ 185 "console=ttyO2,115200n8\0" \ 186 "mmcdev=0\0" \ 187 "vram=3M\0" \ 188 "defaultdisplay=lcd\0" \ 189 "kernelopts=mtdoops.mtddev=3\0" \ 190 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 191 "mtdids=" MTDIDS_DEFAULT "\0" \ 192 "commonargs=" \ 193 "setenv bootargs console=${console} " \ 194 "${mtdparts} " \ 195 "${kernelopts} " \ 196 "vt.global_cursor_default=0 " \ 197 "vram=${vram} " \ 198 "omapdss.def_disp=${defaultdisplay}\0" 199 200 #define CONFIG_BOOTCOMMAND "run autoboot" 201 202 /* specific environment settings for different use cases 203 * FLASHCARD: used to run a rdimage from sdcard to program the device 204 * 'NORMAL': used to boot kernel from sdcard, nand, ... 205 * 206 * The main aim for the FLASHCARD skin is to have an embedded environment 207 * which will not be influenced by any data already on the device. 208 */ 209 #ifdef CONFIG_FLASHCARD 210 211 #define CONFIG_ENV_IS_NOWHERE 212 213 /* the rdaddr is 16 MiB before the loadaddr */ 214 #define CONFIG_ENV_RDADDR "rdaddr=0x81000000\0" 215 216 #define CONFIG_EXTRA_ENV_SETTINGS \ 217 CONFIG_COMMON_ENV_SETTINGS \ 218 CONFIG_ENV_RDADDR \ 219 "autoboot=" \ 220 "run commonargs; " \ 221 "setenv bootargs ${bootargs} " \ 222 "flashy_updateimg=/dev/mmcblk0p1:corscience_update.img " \ 223 "rdinit=/sbin/init; " \ 224 "mmc dev ${mmcdev}; mmc rescan; " \ 225 "fatload mmc ${mmcdev} ${loadaddr} uImage; " \ 226 "fatload mmc ${mmcdev} ${rdaddr} uRamdisk; " \ 227 "bootm ${loadaddr} ${rdaddr}\0" 228 229 #else /* CONFIG_FLASHCARD */ 230 231 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ 232 233 #define CONFIG_ENV_IS_IN_NAND 234 235 #define CONFIG_EXTRA_ENV_SETTINGS \ 236 CONFIG_COMMON_ENV_SETTINGS \ 237 "mmcargs=" \ 238 "run commonargs; " \ 239 "setenv bootargs ${bootargs} " \ 240 "root=/dev/mmcblk0p2 " \ 241 "rootwait " \ 242 "rw\0" \ 243 "nandargs=" \ 244 "run commonargs; " \ 245 "setenv bootargs ${bootargs} " \ 246 "root=ubi0:root " \ 247 "ubi.mtd=7 " \ 248 "rootfstype=ubifs " \ 249 "ro\0" \ 250 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 251 "bootscript=echo Running bootscript from mmc ...; " \ 252 "source ${loadaddr}\0" \ 253 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 254 "mmcboot=echo Booting from mmc ...; " \ 255 "run mmcargs; " \ 256 "bootm ${loadaddr}\0" \ 257 "loaduimage_ubi=ubi part ubi; " \ 258 "ubifsmount ubi:root; " \ 259 "ubifsload ${loadaddr} /boot/uImage\0" \ 260 "nandboot=echo Booting from nand ...; " \ 261 "run nandargs; " \ 262 "run loaduimage_ubi; " \ 263 "bootm ${loadaddr}\0" \ 264 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ 265 "if run loadbootscript; then " \ 266 "run bootscript; " \ 267 "else " \ 268 "if run loaduimage; then " \ 269 "run mmcboot; " \ 270 "else run nandboot; " \ 271 "fi; " \ 272 "fi; " \ 273 "else run nandboot; fi\0" 274 275 #endif /* CONFIG_FLASHCARD */ 276 277 /* Miscellaneous configurable options */ 278 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 279 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 280 #define CONFIG_CMDLINE_EDITING /* enable cmdline history */ 281 #define CONFIG_AUTO_COMPLETE 282 #define CONFIG_SYS_PROMPT "OMAP3 Tricorder # " 283 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 284 /* Print Buffer Size */ 285 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 286 sizeof(CONFIG_SYS_PROMPT) + 16) 287 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 288 289 /* Boot Argument Buffer Size */ 290 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 291 292 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) 293 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ 294 0x01000000) /* 16MB */ 295 296 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) 297 298 /* 299 * OMAP3 has 12 GP timers, they can be driven by the system clock 300 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 301 * This rate is divided by a local divisor. 302 */ 303 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 304 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 305 #define CONFIG_SYS_HZ 1000 306 307 /* Physical Memory Map */ 308 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 309 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 310 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 311 312 /* NAND and environment organization */ 313 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 314 315 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 316 317 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 318 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 319 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 320 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 321 CONFIG_SYS_INIT_RAM_SIZE - \ 322 GENERATED_GBL_DATA_SIZE) 323 324 /* SRAM config */ 325 #define CONFIG_SYS_SRAM_START 0x40200000 326 #define CONFIG_SYS_SRAM_SIZE 0x10000 327 328 /* Defines for SPL */ 329 #define CONFIG_SPL 330 #define CONFIG_SPL_FRAMEWORK 331 #define CONFIG_SPL_NAND_SIMPLE 332 333 #define CONFIG_SPL_BOARD_INIT 334 #define CONFIG_SPL_GPIO_SUPPORT 335 #define CONFIG_SPL_LIBCOMMON_SUPPORT 336 #define CONFIG_SPL_LIBDISK_SUPPORT 337 #define CONFIG_SPL_I2C_SUPPORT 338 #define CONFIG_SPL_LIBGENERIC_SUPPORT 339 #define CONFIG_SPL_SERIAL_SUPPORT 340 #define CONFIG_SPL_POWER_SUPPORT 341 #define CONFIG_SPL_NAND_SUPPORT 342 #define CONFIG_SPL_NAND_BASE 343 #define CONFIG_SPL_NAND_DRIVERS 344 #define CONFIG_SPL_NAND_ECC 345 #define CONFIG_SPL_MMC_SUPPORT 346 #define CONFIG_SPL_FAT_SUPPORT 347 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 348 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" 349 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 350 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 351 352 #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ 353 #define CONFIG_SPL_MAX_SIZE (55 * 1024) /* 7 KB for stack */ 354 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 355 356 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ 357 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 358 359 /* NAND boot config */ 360 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 361 #define CONFIG_SYS_NAND_PAGE_COUNT 64 362 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 363 #define CONFIG_SYS_NAND_OOBSIZE 64 364 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 365 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 366 #define CONFIG_SYS_NAND_ECCPOS {12, 13, 14, 15, 16, 17, 18, 19, 20,\ 367 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\ 368 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\ 369 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\ 370 60, 61, 62, 63} 371 372 #define CONFIG_SYS_NAND_ECCSIZE 512 373 #define CONFIG_SYS_NAND_ECCBYTES 13 374 375 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 376 377 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 378 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x100000 379 380 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 381 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ 382 383 #endif /* __CONFIG_H */ 384