1 /* 2 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_THEADORABLE_H 8 #define _CONFIG_THEADORABLE_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 /* 16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 17 * for DDR ECC byte filling in the SPL before loading the main 18 * U-Boot into it. 19 */ 20 #define CONFIG_SYS_TEXT_BASE 0x00800000 21 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 22 23 /* 24 * Commands configuration 25 */ 26 #define CONFIG_CMD_ENV 27 #define CONFIG_CMD_SATA 28 29 /* 30 * The debugging version enables USB support via defconfig. 31 * This version should also enable all other non-production 32 * interfaces / features. 33 */ 34 #ifdef CONFIG_USB 35 #define CONFIG_CMD_PCI 36 #endif 37 38 /* I2C */ 39 #define CONFIG_SYS_I2C 40 #define CONFIG_SYS_I2C_MVTWSI 41 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 42 #define CONFIG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE 43 #define CONFIG_SYS_I2C_SLAVE 0x0 44 #define CONFIG_SYS_I2C_SPEED 100000 45 46 /* USB/EHCI configuration */ 47 #define CONFIG_EHCI_IS_TDI 48 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 49 50 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 51 52 /* SPI NOR flash default params, used by sf commands */ 53 #define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */ 54 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 55 56 /* Environment in SPI NOR flash */ 57 #define CONFIG_ENV_IS_IN_SPI_FLASH 58 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 59 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 60 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 61 #define CONFIG_ENV_OVERWRITE 62 63 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 64 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 65 66 #define CONFIG_SYS_ALT_MEMTEST 67 #define CONFIG_PREBOOT 68 69 /* Keep device tree and initrd in lower memory so the kernel can access them */ 70 #define CONFIG_EXTRA_ENV_SETTINGS \ 71 "fdt_high=0x10000000\0" \ 72 "initrd_high=0x10000000\0" 73 74 /* SATA support */ 75 #define CONFIG_SYS_SATA_MAX_DEVICE 1 76 #define CONFIG_SATA_MV 77 #define CONFIG_LIBATA 78 #define CONFIG_LBA48 79 #define CONFIG_EFI_PARTITION 80 81 /* Additional FS support/configuration */ 82 #define CONFIG_SUPPORT_VFAT 83 84 /* PCIe support */ 85 #ifdef CONFIG_CMD_PCI 86 #ifndef CONFIG_SPL_BUILD 87 #define CONFIG_PCI_MVEBU 88 #endif 89 #endif 90 91 /* Enable LCD and reserve 512KB from top of memory*/ 92 #define CONFIG_SYS_MEM_TOP_HIDE 0x80000 93 94 #define CONFIG_CMD_BMP 95 96 /* FPGA programming support */ 97 #define CONFIG_FPGA 98 #define CONFIG_FPGA_ALTERA 99 #define CONFIG_FPGA_STRATIX_V 100 101 /* 102 * Bootcounter 103 */ 104 #define CONFIG_BOOTCOUNT_LIMIT 105 #define CONFIG_BOOTCOUNT_RAM 106 /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */ 107 #define BOOTCOUNT_ADDR 0x1000 108 109 /* 110 * mv-common.h should be defined after CMD configs since it used them 111 * to enable certain macros 112 */ 113 #include "mv-common.h" 114 115 /* 116 * Memory layout while starting into the bin_hdr via the 117 * BootROM: 118 * 119 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 120 * 0x4000.4030 bin_hdr start address 121 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 122 * 0x4007.fffc BootROM stack top 123 * 124 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 125 * L2 cache thus cannot be used. 126 */ 127 128 /* SPL */ 129 /* Defines for SPL */ 130 #define CONFIG_SPL_FRAMEWORK 131 #define CONFIG_SPL_TEXT_BASE 0x40004030 132 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 133 134 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 135 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 136 137 #ifdef CONFIG_SPL_BUILD 138 #define CONFIG_SYS_MALLOC_SIMPLE 139 #endif 140 141 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 142 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 143 144 /* SPL related SPI defines */ 145 #define CONFIG_SPL_SPI_LOAD 146 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 147 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 148 149 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 150 #define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */ 151 152 #endif /* _CONFIG_THEADORABLE_H */ 153