xref: /rk3399_rockchip-uboot/include/configs/tb100.h (revision 832325c18d1d68e0ee46810f788421865f6372d9)
1 /*
2  * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_TB100_H_
8 #define _CONFIG_TB100_H_
9 
10 #include <linux/sizes.h>
11 
12 /*
13  *  CPU configuration
14  */
15 #define CONFIG_ARC_MMU_VER		3
16 #define CONFIG_SYS_CACHELINE_SIZE	32
17 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
18 
19 /*
20  * Board configuration
21  */
22 #define CONFIG_SYS_GENERIC_BOARD
23 #define CONFIG_ARCH_EARLY_INIT_R
24 
25 /*
26  * Memory configuration
27  */
28 #define CONFIG_SYS_TEXT_BASE		0x84000000
29 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
30 
31 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
32 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
33 #define CONFIG_SYS_SDRAM_SIZE		SZ_128M
34 
35 #define CONFIG_SYS_INIT_SP_ADDR		\
36 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
37 
38 #define CONFIG_SYS_MALLOC_LEN		SZ_128K
39 #define CONFIG_SYS_BOOTM_LEN		SZ_32M
40 #define CONFIG_SYS_LOAD_ADDR		0x82000000
41 
42 #define CONFIG_SYS_NO_FLASH
43 
44 /*
45  * UART configuration
46  */
47 #define CONFIG_CONS_INDEX		1
48 #define CONFIG_SYS_NS16550
49 #define CONFIG_SYS_NS16550_SERIAL
50 #define CONFIG_SYS_NS16550_REG_SIZE	-4
51 #define CONFIG_SYS_NS16550_CLK		166666666
52 #define CONFIG_SYS_NS16550_COM1		0xFF100000
53 #define CONFIG_SYS_NS16550_MEM32
54 
55 #define CONFIG_BAUDRATE			115200
56 
57 /*
58  * Ethernet PHY configuration
59  */
60 #define CONFIG_PHYLIB
61 #define CONFIG_PHY_GIGE
62 
63 /*
64  * Even though the board houses Realtek RTL8211E PHY
65  * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
66  * In particular "parse_status" reports link is down.
67  *
68  * Until Realtek PHY driver is fixed fall back to generic PHY driver
69  * which implements all required functionality and behaves much more stable.
70  *
71  * #define CONFIG_PHY_REALTEK
72  *
73  */
74 
75 /*
76  * Ethernet configuration
77  */
78 #define CONFIG_DESIGNWARE_ETH
79 #define ETH0_BASE_ADDRESS		0xFE100000
80 #define ETH1_BASE_ADDRESS		0xFE110000
81 
82 /*
83  * Command line configuration
84  */
85 #include <config_cmd_default.h>
86 
87 #define CONFIG_CMD_DHCP
88 #define CONFIG_CMD_ELF
89 #define CONFIG_CMD_PING
90 
91 #define CONFIG_OF_LIBFDT
92 
93 #define CONFIG_AUTO_COMPLETE
94 #define CONFIG_SYS_MAXARGS		16
95 
96 /*
97  * Environment settings
98  */
99 #define CONFIG_ENV_IS_NOWHERE
100 #define CONFIG_ENV_SIZE			SZ_2K
101 #define CONFIG_ENV_OFFSET		0
102 
103 /*
104  * Environment configuration
105  */
106 #define CONFIG_BOOTDELAY		3
107 #define CONFIG_BOOTFILE			"uImage"
108 #define CONFIG_BOOTARGS			"console=ttyS0,115200n8"
109 #define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
110 
111 /*
112  * Console configuration
113  */
114 #define CONFIG_SYS_LONGHELP
115 #define CONFIG_SYS_PROMPT		"[tb100]:~# "
116 #define CONFIG_SYS_CBSIZE		256
117 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
118 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
119 						sizeof(CONFIG_SYS_PROMPT) + 16)
120 
121 #endif /* _CONFIG_TB100_H_ */
122