xref: /rk3399_rockchip-uboot/include/configs/tb100.h (revision 6eb651ad29636682067f76de4f40c45119269f8b)
1 /*
2  * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_TB100_H_
8 #define _CONFIG_TB100_H_
9 
10 #include <linux/sizes.h>
11 
12 /*
13  *  CPU configuration
14  */
15 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
16 
17 /*
18  * Board configuration
19  */
20 #define CONFIG_ARCH_EARLY_INIT_R
21 
22 /*
23  * Memory configuration
24  */
25 #define CONFIG_SYS_TEXT_BASE		0x84000000
26 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
27 
28 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
29 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
30 #define CONFIG_SYS_SDRAM_SIZE		SZ_128M
31 
32 #define CONFIG_SYS_INIT_SP_ADDR		\
33 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
34 
35 #define CONFIG_SYS_MALLOC_LEN		SZ_128K
36 #define CONFIG_SYS_BOOTM_LEN		SZ_32M
37 #define CONFIG_SYS_LOAD_ADDR		0x82000000
38 
39 #define CONFIG_SYS_NO_FLASH
40 
41 /*
42  * UART configuration
43  */
44 #define CONFIG_CONS_INDEX		1
45 #define CONFIG_SYS_NS16550
46 #define CONFIG_SYS_NS16550_SERIAL
47 #define CONFIG_SYS_NS16550_REG_SIZE	-4
48 #define CONFIG_SYS_NS16550_CLK		166666666
49 #define CONFIG_SYS_NS16550_COM1		0xFF100000
50 #define CONFIG_SYS_NS16550_MEM32
51 
52 #define CONFIG_BAUDRATE			115200
53 
54 /*
55  * Ethernet PHY configuration
56  */
57 #define CONFIG_PHYLIB
58 #define CONFIG_PHY_GIGE
59 
60 /*
61  * Even though the board houses Realtek RTL8211E PHY
62  * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
63  * In particular "parse_status" reports link is down.
64  *
65  * Until Realtek PHY driver is fixed fall back to generic PHY driver
66  * which implements all required functionality and behaves much more stable.
67  *
68  * #define CONFIG_PHY_REALTEK
69  *
70  */
71 
72 /*
73  * Ethernet configuration
74  */
75 #define CONFIG_DESIGNWARE_ETH
76 #define ETH0_BASE_ADDRESS		0xFE100000
77 #define ETH1_BASE_ADDRESS		0xFE110000
78 
79 /*
80  * Command line configuration
81  */
82 #include <config_cmd_default.h>
83 
84 #define CONFIG_CMD_DHCP
85 #define CONFIG_CMD_ELF
86 #define CONFIG_CMD_PING
87 
88 #define CONFIG_OF_LIBFDT
89 
90 #define CONFIG_AUTO_COMPLETE
91 #define CONFIG_SYS_MAXARGS		16
92 
93 /*
94  * Environment settings
95  */
96 #define CONFIG_ENV_IS_NOWHERE
97 #define CONFIG_ENV_SIZE			SZ_2K
98 #define CONFIG_ENV_OFFSET		0
99 
100 /*
101  * Environment configuration
102  */
103 #define CONFIG_BOOTDELAY		3
104 #define CONFIG_BOOTFILE			"uImage"
105 #define CONFIG_BOOTARGS			"console=ttyS0,115200n8"
106 #define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
107 
108 /*
109  * Console configuration
110  */
111 #define CONFIG_SYS_LONGHELP
112 #define CONFIG_SYS_PROMPT		"[tb100]:~# "
113 #define CONFIG_SYS_CBSIZE		256
114 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
115 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
116 						sizeof(CONFIG_SYS_PROMPT) + 16)
117 
118 #endif /* _CONFIG_TB100_H_ */
119