xref: /rk3399_rockchip-uboot/include/configs/tb100.h (revision 205e7a7b77726abeff57576e2ecf2c6d4dc07ccf)
1 /*
2  * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_TB100_H_
8 #define _CONFIG_TB100_H_
9 
10 #include <linux/sizes.h>
11 
12 /*
13  *  CPU configuration
14  */
15 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
16 
17 /*
18  * Board configuration
19  */
20 #define CONFIG_SYS_GENERIC_BOARD
21 #define CONFIG_ARCH_EARLY_INIT_R
22 
23 /*
24  * Memory configuration
25  */
26 #define CONFIG_SYS_TEXT_BASE		0x84000000
27 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
28 
29 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
30 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
31 #define CONFIG_SYS_SDRAM_SIZE		SZ_128M
32 
33 #define CONFIG_SYS_INIT_SP_ADDR		\
34 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
35 
36 #define CONFIG_SYS_MALLOC_LEN		SZ_128K
37 #define CONFIG_SYS_BOOTM_LEN		SZ_32M
38 #define CONFIG_SYS_LOAD_ADDR		0x82000000
39 
40 #define CONFIG_SYS_NO_FLASH
41 
42 /*
43  * UART configuration
44  */
45 #define CONFIG_CONS_INDEX		1
46 #define CONFIG_SYS_NS16550
47 #define CONFIG_SYS_NS16550_SERIAL
48 #define CONFIG_SYS_NS16550_REG_SIZE	-4
49 #define CONFIG_SYS_NS16550_CLK		166666666
50 #define CONFIG_SYS_NS16550_COM1		0xFF100000
51 #define CONFIG_SYS_NS16550_MEM32
52 
53 #define CONFIG_BAUDRATE			115200
54 
55 /*
56  * Ethernet PHY configuration
57  */
58 #define CONFIG_PHYLIB
59 #define CONFIG_PHY_GIGE
60 
61 /*
62  * Even though the board houses Realtek RTL8211E PHY
63  * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
64  * In particular "parse_status" reports link is down.
65  *
66  * Until Realtek PHY driver is fixed fall back to generic PHY driver
67  * which implements all required functionality and behaves much more stable.
68  *
69  * #define CONFIG_PHY_REALTEK
70  *
71  */
72 
73 /*
74  * Ethernet configuration
75  */
76 #define CONFIG_DESIGNWARE_ETH
77 #define ETH0_BASE_ADDRESS		0xFE100000
78 #define ETH1_BASE_ADDRESS		0xFE110000
79 
80 /*
81  * Command line configuration
82  */
83 #include <config_cmd_default.h>
84 
85 #define CONFIG_CMD_DHCP
86 #define CONFIG_CMD_ELF
87 #define CONFIG_CMD_PING
88 
89 #define CONFIG_OF_LIBFDT
90 
91 #define CONFIG_AUTO_COMPLETE
92 #define CONFIG_SYS_MAXARGS		16
93 
94 /*
95  * Environment settings
96  */
97 #define CONFIG_ENV_IS_NOWHERE
98 #define CONFIG_ENV_SIZE			SZ_2K
99 #define CONFIG_ENV_OFFSET		0
100 
101 /*
102  * Environment configuration
103  */
104 #define CONFIG_BOOTDELAY		3
105 #define CONFIG_BOOTFILE			"uImage"
106 #define CONFIG_BOOTARGS			"console=ttyS0,115200n8"
107 #define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
108 
109 /*
110  * Console configuration
111  */
112 #define CONFIG_SYS_LONGHELP
113 #define CONFIG_SYS_PROMPT		"[tb100]:~# "
114 #define CONFIG_SYS_CBSIZE		256
115 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
116 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
117 						sizeof(CONFIG_SYS_PROMPT) + 16)
118 
119 #endif /* _CONFIG_TB100_H_ */
120