1 /* 2 * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards 3 * (C) Copyright 2013 Siemens AG 4 * 5 * Based on: 6 * U-Boot file: include/configs/at91sam9260ek.h 7 * 8 * (C) Copyright 2007-2008 9 * Stelian Pop <stelian@popies.net> 10 * Lead Tech Design <www.leadtechdesign.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 /* 19 * SoC must be defined first, before hardware.h is included. 20 * In this case SoC is defined in boards.cfg. 21 */ 22 #include <asm/hardware.h> 23 24 #define CONFIG_SYS_GENERIC_BOARD 25 26 #if defined(CONFIG_SPL_BUILD) 27 #define CONFIG_SYS_THUMB_BUILD 28 #define CONFIG_SYS_ICACHE_OFF 29 #define CONFIG_SYS_DCACHE_OFF 30 #endif 31 /* 32 * Warning: changing CONFIG_SYS_TEXT_BASE requires 33 * adapting the initial boot program. 34 * Since the linker has to swallow that define, we must use a pure 35 * hex number here! 36 */ 37 38 39 #define CONFIG_SYS_TEXT_BASE 0x21000000 40 41 /* ARM asynchronous clock */ 42 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 43 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ 44 45 /* Misc CPU related */ 46 #define CONFIG_ARCH_CPU_INIT 47 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 48 #define CONFIG_SETUP_MEMORY_TAGS 49 #define CONFIG_INITRD_TAG 50 #define CONFIG_SKIP_LOWLEVEL_INIT 51 #define CONFIG_BOARD_EARLY_INIT_F 52 #define CONFIG_DISPLAY_CPUINFO 53 54 #define CONFIG_CMD_BOOTZ 55 #define CONFIG_OF_LIBFDT 56 57 /* general purpose I/O */ 58 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 59 #define CONFIG_AT91_GPIO 60 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 61 62 /* serial console */ 63 #define CONFIG_ATMEL_USART 64 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 65 #define CONFIG_USART_ID ATMEL_ID_SYS 66 #define CONFIG_BAUDRATE 115200 67 68 #define CONFIG_BOOTDELAY 3 69 70 /* 71 * Command line configuration. 72 */ 73 #include <config_cmd_default.h> 74 #undef CONFIG_CMD_BDI 75 #undef CONFIG_CMD_FPGA 76 #undef CONFIG_CMD_IMI 77 #undef CONFIG_CMD_IMLS 78 #undef CONFIG_CMD_LOADS 79 #undef CONFIG_CMD_SOURCE 80 81 #define CONFIG_CMD_PING 82 #define CONFIG_CMD_DHCP 83 #define CONFIG_CMD_NAND 84 85 /* 86 * SDRAM: 1 bank, min 32, max 128 MB 87 * Initialized before u-boot gets started. 88 */ 89 #define CONFIG_NR_DRAM_BANKS 1 90 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 91 #define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) 92 93 /* 94 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 95 * leaving the correct space for initial global data structure above 96 * that address while providing maximum stack area below. 97 */ 98 # define CONFIG_SYS_INIT_SP_ADDR \ 99 (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) 100 101 /* NAND flash */ 102 #ifdef CONFIG_CMD_NAND 103 #define CONFIG_NAND_ATMEL 104 #define CONFIG_SYS_MAX_NAND_DEVICE 1 105 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 106 #define CONFIG_SYS_NAND_DBW_8 107 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 108 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 109 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 110 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 111 #endif 112 113 /* NOR flash - no real flash on this board */ 114 #define CONFIG_SYS_NO_FLASH 1 115 116 /* Ethernet */ 117 #define CONFIG_MACB 118 #define CONFIG_RMII 119 #define CONFIG_AT91_WANTS_COMMON_PHY 120 121 #define CONFIG_AT91SAM9_WATCHDOG 122 #if !defined(CONFIG_SPL_BUILD) 123 /* Enable the watchdog */ 124 #define CONFIG_HW_WATCHDOG 125 #endif 126 127 /* USB */ 128 #if defined(CONFIG_BOARD_TAURUS) 129 #define CONFIG_USB_ATMEL 130 #define CONFIG_USB_OHCI_NEW 131 #define CONFIG_SYS_USB_OHCI_CPU_INIT 132 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 133 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" 134 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 135 #define CONFIG_USB_STORAGE 136 #endif 137 138 /* SPI EEPROM */ 139 #define CONFIG_SPI 140 #define CONFIG_CMD_SPI 141 #define CONFIG_CMD_SF 142 #define CONFIG_ATMEL_SPI 143 #define CONFIG_SPI_FLASH_STMICRO 144 #define TAURUS_SPI_MASK (1 << 4) 145 #define TAURUS_SPI_CS_PIN AT91_PIN_PA3 146 147 #if defined(CONFIG_SPL_BUILD) 148 /* SPL related */ 149 #undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ 150 #define CONFIG_SPL_SPI_SUPPORT 151 #define CONFIG_SPL_SPI_FLASH_SUPPORT 152 #define CONFIG_SPL_SPI_LOAD 153 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 154 155 #define CONFIG_SF_DEFAULT_BUS 0 156 #define CONFIG_SF_DEFAULT_SPEED 10000000 157 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 158 #endif 159 160 /* load address */ 161 #define CONFIG_SYS_LOAD_ADDR 0x22000000 162 163 /* bootstrap in spi flash , u-boot + env + linux in nandflash */ 164 #define CONFIG_ENV_IS_IN_NAND 165 #define CONFIG_ENV_OFFSET 0x100000 166 #define CONFIG_ENV_OFFSET_REDUND 0x180000 167 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 168 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" 169 #define CONFIG_BOOTARGS \ 170 "console=ttyS0,115200 earlyprintk " \ 171 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 172 "256k(env),256k(env_redundant),256k(spare)," \ 173 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 174 "root=/dev/mtdblock7 rw rootfstype=jffs2" 175 176 #define CONFIG_SYS_PROMPT "U-Boot> " 177 #define CONFIG_SYS_CBSIZE 256 178 #define CONFIG_SYS_MAXARGS 16 179 #define CONFIG_SYS_PBSIZE \ 180 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 181 #define CONFIG_SYS_LONGHELP 182 #define CONFIG_CMDLINE_EDITING 183 #define CONFIG_AUTO_COMPLETE 184 185 /* 186 * Size of malloc() pool 187 */ 188 #define CONFIG_SYS_MALLOC_LEN \ 189 ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 190 191 /* Defines for SPL */ 192 #define CONFIG_SPL_FRAMEWORK 193 #define CONFIG_SPL_TEXT_BASE 0x0 194 #define CONFIG_SPL_MAX_SIZE (14 * 1024) 195 #define CONFIG_SPL_STACK (16 * 1024) 196 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ 197 CONFIG_SYS_MALLOC_LEN) 198 #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN 199 200 #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE 201 #define CONFIG_SPL_BSS_MAX_SIZE (3 * 1024) 202 203 #define CONFIG_SPL_LIBCOMMON_SUPPORT 204 #define CONFIG_SPL_LIBGENERIC_SUPPORT 205 #define CONFIG_SPL_SERIAL_SUPPORT 206 207 #define CONFIG_SPL_BOARD_INIT 208 #define CONFIG_SPL_GPIO_SUPPORT 209 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) 210 #define CONFIG_SPL_NAND_SUPPORT 211 #define CONFIG_SYS_USE_NANDFLASH 1 212 #define CONFIG_SPL_NAND_DRIVERS 213 #define CONFIG_SPL_NAND_BASE 214 #define CONFIG_SPL_NAND_ECC 215 #define CONFIG_SPL_NAND_RAW_ONLY 216 #define CONFIG_SPL_NAND_SOFTECC 217 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 218 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 219 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 220 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 221 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 222 223 #define CONFIG_SYS_NAND_SIZE (256*1024*1024) 224 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 225 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 226 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 227 CONFIG_SYS_NAND_PAGE_SIZE) 228 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 229 #define CONFIG_SYS_NAND_ECCSIZE 256 230 #define CONFIG_SYS_NAND_ECCBYTES 3 231 #define CONFIG_SYS_NAND_OOBSIZE 64 232 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 233 48, 49, 50, 51, 52, 53, 54, 55, \ 234 56, 57, 58, 59, 60, 61, 62, 63, } 235 236 237 #define CONFIG_SPL_ATMEL_SIZE 238 #define CONFIG_SYS_MASTER_CLOCK 132096000 239 #define AT91_PLL_LOCK_TIMEOUT 1000000 240 #define CONFIG_SYS_AT91_PLLA 0x202A3F01 241 #define CONFIG_SYS_MCKR 0x1300 242 #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) 243 #define CONFIG_SYS_AT91_PLLB 0x10193F05 244 #endif 245