1 /* 2 * Configuration settings for the TechNexion TAO-3530 SOM 3 * equipped on Thunder baseboard. 4 * 5 * Edward Lin <linuxfae@technexion.com> 6 * Tapani Utriainen <linuxfae@technexion.com> 7 * 8 * Copyright (C) 2013 Stefan Roese <sr@denx.de> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 /* 17 * High Level Configuration Options 18 */ 19 20 #define CONFIG_SDRC /* Has an SDRC controller */ 21 22 #include <asm/arch/cpu.h> /* get chip and board defs */ 23 #include <asm/arch/omap.h> 24 25 /* Clock Defines */ 26 #define V_OSCK 26000000 /* Clock output from T2 */ 27 #define V_SCLK (V_OSCK >> 1) 28 29 #define CONFIG_MISC_INIT_R 30 31 #define CONFIG_CMDLINE_TAG 32 #define CONFIG_SETUP_MEMORY_TAGS 33 #define CONFIG_INITRD_TAG 34 #define CONFIG_REVISION_TAG 35 36 /* 37 * Size of malloc() pool 38 */ 39 #define CONFIG_SYS_MALLOC_LEN (4 << 20) 40 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 41 42 /* 43 * Hardware drivers 44 */ 45 46 /* 47 * NS16550 Configuration 48 */ 49 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 50 51 #define CONFIG_SYS_NS16550_SERIAL 52 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 53 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 54 55 /* 56 * select serial console configuration 57 */ 58 #define CONFIG_CONS_INDEX 3 59 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 60 61 /* allow to overwrite serial and ethaddr */ 62 #define CONFIG_ENV_OVERWRITE 63 64 /* commands to include */ 65 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 66 #define MTDIDS_DEFAULT "nand0=nand" 67 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 68 "1920k(u-boot),128k(u-boot-env),"\ 69 "4m(kernel),-(fs)" 70 71 #define CONFIG_SYS_I2C 72 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 73 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 74 #define CONFIG_I2C_MULTI_BUS 75 76 /* 77 * TWL4030 78 */ 79 #define CONFIG_TWL4030_LED 80 81 /* 82 * Board NAND Info. 83 */ 84 #define CONFIG_NAND_OMAP_GPMC 85 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 86 /* to access nand */ 87 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 88 /* to access nand at */ 89 /* CS0 */ 90 91 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 92 /* devices */ 93 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 94 /* Environment information */ 95 96 #define CONFIG_EXTRA_ENV_SETTINGS \ 97 "loadaddr=0x82000000\0" \ 98 "console=ttyO2,115200n8\0" \ 99 "mpurate=600\0" \ 100 "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \ 101 "tv_mode=omapfb.mode=tv:ntsc\0" \ 102 "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \ 103 "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \ 104 "extra_options= \0" \ 105 "mmcdev=0\0" \ 106 "mmcroot=/dev/mmcblk0p2 rw\0" \ 107 "mmcrootfstype=ext3 rootwait\0" \ 108 "nandroot=ubi0:rootfs ubi.mtd=4\0" \ 109 "nandrootfstype=ubifs\0" \ 110 "mmcargs=setenv bootargs console=${console} " \ 111 "mpurate=${mpurate} " \ 112 "${video_mode} " \ 113 "root=${mmcroot} " \ 114 "rootfstype=${mmcrootfstype} " \ 115 "${extra_options}\0" \ 116 "nandargs=setenv bootargs console=${console} " \ 117 "mpurate=${mpurate} " \ 118 "${video_mode} " \ 119 "${network_setting} " \ 120 "root=${nandroot} " \ 121 "rootfstype=${nandrootfstype} "\ 122 "${extra_options}\0" \ 123 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 124 "bootscript=echo Running bootscript from mmc ...; " \ 125 "source ${loadaddr}\0" \ 126 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 127 "mmcboot=echo Booting from mmc ...; " \ 128 "run mmcargs; " \ 129 "bootm ${loadaddr}\0" \ 130 "nandboot=echo Booting from nand ...; " \ 131 "run nandargs; " \ 132 "nand read ${loadaddr} 280000 400000; " \ 133 "bootm ${loadaddr}\0" \ 134 135 #define CONFIG_BOOTCOMMAND \ 136 "if mmc rescan ${mmcdev}; then " \ 137 "if run loadbootscript; then " \ 138 "run bootscript; " \ 139 "else " \ 140 "if run loaduimage; then " \ 141 "run mmcboot; " \ 142 "else run nandboot; " \ 143 "fi; " \ 144 "fi; " \ 145 "else run nandboot; fi" 146 147 /* 148 * Miscellaneous configurable options 149 */ 150 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 151 152 /* turn on command-line edit/hist/auto */ 153 #define CONFIG_CMDLINE_EDITING 154 #define CONFIG_AUTO_COMPLETE 155 156 /* Boot Argument Buffer Size */ 157 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 158 159 #define CONFIG_SYS_ALT_MEMTEST 1 160 #define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */ 161 /* defaults */ 162 #define CONFIG_SYS_MEMTEST_END (0x83FFFFFF) /* 64MB */ 163 #define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ 164 165 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 166 /* load address */ 167 #define CONFIG_SYS_TEXT_BASE 0x80008000 168 169 /* 170 * OMAP3 has 12 GP timers, they can be driven by the system clock 171 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 172 * This rate is divided by a local divisor. 173 */ 174 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 175 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 176 177 /* 178 * Physical Memory Map 179 */ 180 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 181 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 182 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 183 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 184 185 /* 186 * FLASH and environment organization 187 */ 188 189 /* **** PISMO SUPPORT *** */ 190 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 191 #define CONFIG_SYS_FLASH_BASE NAND_BASE 192 193 /* Monitor at start of flash */ 194 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 195 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 196 197 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 198 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 199 200 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) 201 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 202 #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET 203 204 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 205 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 206 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 207 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 208 CONFIG_SYS_INIT_RAM_SIZE - \ 209 GENERATED_GBL_DATA_SIZE) 210 211 /* 212 * USB 213 * 214 * Currently only EHCI is enabled, the MUSB OTG controller 215 * is not enabled. 216 */ 217 218 /* USB EHCI */ 219 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162 220 221 #define CONFIG_USB_HOST_ETHER 222 #define CONFIG_USB_ETHER_SMSC95XX 223 224 #define CONFIG_USB_ETHER 225 #define CONFIG_USB_ETHER_RNDIS 226 227 /* Defines for SPL */ 228 #define CONFIG_SPL_FRAMEWORK 229 #define CONFIG_SPL_NAND_SIMPLE 230 231 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 232 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 233 234 #define CONFIG_SPL_NAND_BASE 235 #define CONFIG_SPL_NAND_DRIVERS 236 #define CONFIG_SPL_NAND_ECC 237 238 /* NAND boot config */ 239 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 240 #define CONFIG_SYS_NAND_PAGE_COUNT 64 241 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 242 #define CONFIG_SYS_NAND_OOBSIZE 64 243 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 244 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 245 /* 246 * Use the ECC/OOB layout from omap_gpmc.h that matches your chip: 247 * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT 248 */ 249 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 250 10, 11, 12, 13 } 251 #define CONFIG_SYS_NAND_ECCSIZE 512 252 #define CONFIG_SYS_NAND_ECCBYTES 3 253 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 254 255 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 256 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 257 258 #define CONFIG_SPL_TEXT_BASE 0x40200800 259 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 260 CONFIG_SPL_TEXT_BASE) 261 262 /* 263 * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the 264 * older x-loader implementations. And move the BSS area so that it 265 * doesn't overlap with TEXT_BASE. 266 */ 267 #define CONFIG_SYS_TEXT_BASE 0x80008000 268 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 269 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 270 271 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 272 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 273 274 #endif /* __CONFIG_H */ 275