1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 /* 17 * High Level Configuration Options 18 */ 19 #define CONFIG_SUNXI /* sunxi family */ 20 #ifdef CONFIG_SPL_BUILD 21 #ifndef CONFIG_SPL_FEL 22 #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ 23 #endif 24 #endif 25 26 #include <asm/arch/cpu.h> /* get chip and board defs */ 27 28 #define CONFIG_SYS_TEXT_BASE 0x4a000000 29 30 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) 31 # define CONFIG_CMD_DM 32 # define CONFIG_DM_GPIO 33 # define CONFIG_DM_SERIAL 34 # define CONFIG_DW_SERIAL 35 # define CONFIG_SYS_MALLOC_F_LEN (1 << 10) 36 #endif 37 38 /* 39 * Display CPU information 40 */ 41 #define CONFIG_DISPLAY_CPUINFO 42 43 /* Serial & console */ 44 #define CONFIG_SYS_NS16550 45 #define CONFIG_SYS_NS16550_SERIAL 46 /* ns16550 reg in the low bits of cpu reg */ 47 #define CONFIG_SYS_NS16550_CLK 24000000 48 #ifndef CONFIG_DM_SERIAL 49 # define CONFIG_SYS_NS16550_REG_SIZE -4 50 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 51 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 52 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 53 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 54 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 55 #endif 56 57 /* DRAM Base */ 58 #define CONFIG_SYS_SDRAM_BASE 0x40000000 59 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 60 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 61 62 #define CONFIG_SYS_INIT_SP_OFFSET \ 63 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 64 #define CONFIG_SYS_INIT_SP_ADDR \ 65 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 66 67 #define CONFIG_NR_DRAM_BANKS 1 68 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 69 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 70 71 #ifdef CONFIG_AHCI 72 #define CONFIG_LIBATA 73 #define CONFIG_SCSI_AHCI 74 #define CONFIG_SCSI_AHCI_PLAT 75 #define CONFIG_SUNXI_AHCI 76 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 77 #define CONFIG_SYS_SCSI_MAX_LUN 1 78 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 79 CONFIG_SYS_SCSI_MAX_LUN) 80 #define CONFIG_CMD_SCSI 81 #endif 82 83 #define CONFIG_CMD_MEMORY 84 #define CONFIG_CMD_SETEXPR 85 86 #define CONFIG_SETUP_MEMORY_TAGS 87 #define CONFIG_CMDLINE_TAG 88 #define CONFIG_INITRD_TAG 89 90 /* mmc config */ 91 #if !defined(CONFIG_UART0_PORT_F) 92 #define CONFIG_MMC 93 #define CONFIG_GENERIC_MMC 94 #define CONFIG_CMD_MMC 95 #define CONFIG_MMC_SUNXI 96 #define CONFIG_MMC_SUNXI_SLOT 0 97 #define CONFIG_ENV_IS_IN_MMC 98 #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ 99 #endif 100 101 /* 4MB of malloc() pool */ 102 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) 103 104 /* 105 * Miscellaneous configurable options 106 */ 107 #define CONFIG_CMD_ECHO 108 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 109 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 110 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 111 #define CONFIG_SYS_GENERIC_BOARD 112 #define CONFIG_SKIP_LOWLEVEL_INIT 113 114 /* Boot Argument Buffer Size */ 115 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 116 117 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 118 119 /* standalone support */ 120 #define CONFIG_STANDALONE_LOAD_ADDR 0x42000000 121 122 /* baudrate */ 123 #define CONFIG_BAUDRATE 115200 124 125 /* The stack sizes are set up in start.S using the settings below */ 126 #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ 127 128 /* FLASH and environment organization */ 129 130 #define CONFIG_SYS_NO_FLASH 131 132 #define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */ 133 #define CONFIG_IDENT_STRING " Allwinner Technology" 134 135 #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ 136 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 137 138 #include <config_cmd_default.h> 139 #undef CONFIG_CMD_FPGA 140 141 #define CONFIG_FAT_WRITE /* enable write access */ 142 143 #define CONFIG_SPL_FRAMEWORK 144 #define CONFIG_SPL_LIBCOMMON_SUPPORT 145 #define CONFIG_SPL_SERIAL_SUPPORT 146 #define CONFIG_SPL_LIBGENERIC_SUPPORT 147 148 #ifdef CONFIG_SPL_FEL 149 150 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" 151 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" 152 #define CONFIG_SPL_TEXT_BASE 0x2000 153 #define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ 154 155 #else /* CONFIG_SPL */ 156 157 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 158 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KiB */ 159 160 #define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */ 161 #define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ 162 163 #define CONFIG_SPL_LIBDISK_SUPPORT 164 165 #if !defined(CONFIG_UART0_PORT_F) 166 #define CONFIG_SPL_MMC_SUPPORT 167 #endif 168 169 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" 170 171 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */ 172 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 173 174 #endif /* CONFIG_SPL */ 175 176 /* end of 32 KiB in sram */ 177 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 178 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 179 #define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000 180 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */ 181 182 /* I2C */ 183 #define CONFIG_SPL_I2C_SUPPORT 184 #define CONFIG_SYS_I2C 185 #define CONFIG_SYS_I2C_MVTWSI 186 #define CONFIG_SYS_I2C_SPEED 400000 187 #define CONFIG_SYS_I2C_SLAVE 0x7f 188 #define CONFIG_CMD_I2C 189 190 /* PMU */ 191 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER 192 #define CONFIG_SPL_POWER_SUPPORT 193 #endif 194 195 #ifndef CONFIG_CONS_INDEX 196 #define CONFIG_CONS_INDEX 1 /* UART0 */ 197 #endif 198 199 /* GPIO */ 200 #define CONFIG_SUNXI_GPIO 201 #define CONFIG_SPL_GPIO_SUPPORT 202 #define CONFIG_CMD_GPIO 203 204 #ifdef CONFIG_VIDEO 205 /* 206 * The amount of RAM that is reserved for the FB. This will not show up as 207 * RAM to the kernel, but will be reclaimed by a KMS driver in future. 208 */ 209 #define CONFIG_SUNXI_FB_SIZE (9 << 20) 210 211 /* Do we want to initialize a simple FB? */ 212 #define CONFIG_VIDEO_DT_SIMPLEFB 213 214 #define CONFIG_VIDEO_SUNXI 215 216 #define CONFIG_CFB_CONSOLE 217 #define CONFIG_VIDEO_SW_CURSOR 218 #define CONFIG_VIDEO_LOGO 219 #define CONFIG_VIDEO_STD_TIMINGS 220 #define CONFIG_I2C_EDID 221 222 /* allow both serial and cfb console. */ 223 #define CONFIG_CONSOLE_MUX 224 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 225 #define CONFIG_VGA_AS_SINGLE_DEVICE 226 227 #define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF) 228 229 /* To be able to hook simplefb into dt */ 230 #ifdef CONFIG_VIDEO_DT_SIMPLEFB 231 #define CONFIG_OF_BOARD_SETUP 232 #endif 233 234 #endif /* CONFIG_VIDEO */ 235 236 /* Ethernet support */ 237 #ifdef CONFIG_SUNXI_EMAC 238 #define CONFIG_MII /* MII PHY management */ 239 #endif 240 241 #ifdef CONFIG_SUNXI_GMAC 242 #define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ 243 #define CONFIG_DW_AUTONEG 244 #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ 245 #define CONFIG_PHY_ADDR 1 246 #define CONFIG_MII /* MII PHY management */ 247 #define CONFIG_PHYLIB 248 #endif 249 250 #ifdef CONFIG_USB_EHCI 251 #define CONFIG_CMD_USB 252 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 253 #define CONFIG_USB_STORAGE 254 #endif 255 256 #ifdef CONFIG_USB_KEYBOARD 257 #define CONFIG_CONSOLE_MUX 258 #define CONFIG_PREBOOT 259 #define CONFIG_SYS_STDIO_DEREGISTER 260 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE 261 #endif 262 263 #if !defined CONFIG_ENV_IS_IN_MMC && \ 264 !defined CONFIG_ENV_IS_IN_NAND && \ 265 !defined CONFIG_ENV_IS_IN_FAT && \ 266 !defined CONFIG_ENV_IS_IN_SPI_FLASH 267 #define CONFIG_ENV_IS_NOWHERE 268 #endif 269 270 #define CONFIG_MISC_INIT_R 271 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 272 273 #ifndef CONFIG_SPL_BUILD 274 #include <config_distro_defaults.h> 275 276 /* Enable pre-console buffer to get complete log on the VGA console */ 277 #define CONFIG_PRE_CONSOLE_BUFFER 278 #define CONFIG_PRE_CON_BUF_SZ (1024 * 1024) 279 /* Use the room between the end of bootm_size and the framebuffer */ 280 #define CONFIG_PRE_CON_BUF_ADDR 0x4f000000 281 282 /* 283 * 240M RAM (256M minimum minus space for the framebuffer), 284 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 285 * 1M script, 1M pxe and the ramdisk at the end. 286 */ 287 #define MEM_LAYOUT_ENV_SETTINGS \ 288 "bootm_size=0xf000000\0" \ 289 "kernel_addr_r=0x42000000\0" \ 290 "fdt_addr_r=0x43000000\0" \ 291 "scriptaddr=0x43100000\0" \ 292 "pxefile_addr_r=0x43200000\0" \ 293 "ramdisk_addr_r=0x43300000\0" 294 295 #ifdef CONFIG_MMC 296 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 297 #else 298 #define BOOT_TARGET_DEVICES_MMC(func) 299 #endif 300 301 #ifdef CONFIG_AHCI 302 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 303 #else 304 #define BOOT_TARGET_DEVICES_SCSI(func) 305 #endif 306 307 #ifdef CONFIG_USB_EHCI 308 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 309 #else 310 #define BOOT_TARGET_DEVICES_USB(func) 311 #endif 312 313 #define BOOT_TARGET_DEVICES(func) \ 314 BOOT_TARGET_DEVICES_MMC(func) \ 315 BOOT_TARGET_DEVICES_SCSI(func) \ 316 BOOT_TARGET_DEVICES_USB(func) \ 317 func(PXE, pxe, na) \ 318 func(DHCP, dhcp, na) 319 320 #include <config_distro_bootcmd.h> 321 322 #ifdef CONFIG_USB_KEYBOARD 323 #define CONSOLE_STDIN_SETTINGS \ 324 "preboot=usb start\0" \ 325 "stdin=serial,usbkbd\0" 326 #else 327 #define CONSOLE_STDIN_SETTINGS \ 328 "stdin=serial\0" 329 #endif 330 331 #ifdef CONFIG_VIDEO 332 #define CONSOLE_STDOUT_SETTINGS \ 333 "stdout=serial,vga\0" \ 334 "stderr=serial,vga\0" 335 #else 336 #define CONSOLE_STDOUT_SETTINGS \ 337 "stdout=serial\0" \ 338 "stderr=serial\0" 339 #endif 340 341 #define CONSOLE_ENV_SETTINGS \ 342 CONSOLE_STDIN_SETTINGS \ 343 CONSOLE_STDOUT_SETTINGS 344 345 #define CONFIG_EXTRA_ENV_SETTINGS \ 346 CONSOLE_ENV_SETTINGS \ 347 MEM_LAYOUT_ENV_SETTINGS \ 348 "fdtfile=" CONFIG_FDTFILE "\0" \ 349 "console=ttyS0,115200\0" \ 350 BOOTENV 351 352 #else /* ifndef CONFIG_SPL_BUILD */ 353 #define CONFIG_EXTRA_ENV_SETTINGS 354 #endif 355 356 #endif /* _SUNXI_COMMON_CONFIG_H */ 357