1 /* 2 * Copyright (C) 2015 Marek Vasut <marex@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 #ifndef __CONFIG_DENX_MCVEVK_H__ 7 #define __CONFIG_DENX_MCVEVK_H__ 8 9 #include <asm/arch/base_addr_ac5.h> 10 11 /* U-Boot Commands */ 12 #define CONFIG_SYS_NO_FLASH 13 #define CONFIG_DOS_PARTITION 14 #define CONFIG_FAT_WRITE 15 #define CONFIG_HW_WATCHDOG 16 17 #define CONFIG_CMD_ASKENV 18 #define CONFIG_CMD_BOOTZ 19 #define CONFIG_CMD_CACHE 20 #define CONFIG_CMD_DFU 21 #define CONFIG_CMD_EXT4 22 #define CONFIG_CMD_EXT4_WRITE 23 #define CONFIG_CMD_FAT 24 #define CONFIG_CMD_FS_GENERIC 25 #define CONFIG_CMD_GREPENV 26 #define CONFIG_CMD_MII 27 #define CONFIG_CMD_MMC 28 #define CONFIG_CMD_USB_MASS_STORAGE 29 30 /* Memory configurations */ 31 #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on MCV */ 32 33 /* Booting Linux */ 34 #define CONFIG_BOOTDELAY 3 35 #define CONFIG_BOOTFILE "fitImage" 36 #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) 37 #define CONFIG_PREBOOT "run try_bootscript" 38 #define CONFIG_BOOTCOMMAND "run mmc_mmc" 39 #define CONFIG_LOADADDR 0x01000000 40 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 41 42 /* Environment is in MMC */ 43 #define CONFIG_ENV_OVERWRITE 44 #define CONFIG_ENV_IS_IN_MMC 45 46 /* Extra Environment */ 47 #define CONFIG_EXTRA_ENV_SETTINGS \ 48 "consdev=ttyS0\0" \ 49 "baudrate=115200\0" \ 50 "bootscript=boot.scr\0" \ 51 "bootdev=/dev/mmcblk0p2\0" \ 52 "rootdev=/dev/mmcblk0p3\0" \ 53 "netdev=eth0\0" \ 54 "hostname=mcvevk\0" \ 55 "kernel_addr_r=0x10000000\0" \ 56 "update_filename=u-boot-with-spl.sfp\0" \ 57 "update_sd_offset=0x800\0" \ 58 "update_sd=" /* Update the SD firmware partition */ \ 59 "if mmc rescan ; then " \ 60 "if tftp ${update_filename} ; then " \ 61 "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ 62 "setexpr fw_sz ${fw_sz} + 1 ; " \ 63 "mmc write ${loadaddr} ${update_sd_offset} ${fw_sz} ; " \ 64 "fi ; " \ 65 "fi\0" \ 66 "update_qspi_offset=0x0\0" \ 67 "update_qspi=" /* Update the QSPI firmware */ \ 68 "if sf probe ; then " \ 69 "if tftp ${update_filename} ; then " \ 70 "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \ 71 "fi ; " \ 72 "fi\0" \ 73 "fpga_filename=output_file.rbf\0" \ 74 "load_fpga=" /* Load FPGA bitstream */ \ 75 "if tftp ${fpga_filename} ; then " \ 76 "fpga load 0 $loadaddr $filesize ; " \ 77 "bridge enable ; " \ 78 "fi\0" \ 79 "addcons=" \ 80 "setenv bootargs ${bootargs} " \ 81 "console=${consdev},${baudrate}\0" \ 82 "addip=" \ 83 "setenv bootargs ${bootargs} " \ 84 "ip=${ipaddr}:${serverip}:${gatewayip}:" \ 85 "${netmask}:${hostname}:${netdev}:off\0" \ 86 "addmisc=" \ 87 "setenv bootargs ${bootargs} ${miscargs}\0" \ 88 "addargs=run addcons addmisc\0" \ 89 "mmcload=" \ 90 "mmc rescan ; " \ 91 "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \ 92 "netload=" \ 93 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ 94 "miscargs=nohlt panic=1\0" \ 95 "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ 96 "nfsargs=" \ 97 "setenv bootargs root=/dev/nfs rw " \ 98 "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ 99 "mmc_mmc=" \ 100 "run mmcload mmcargs addargs ; " \ 101 "bootm ${kernel_addr_r}\0" \ 102 "mmc_nfs=" \ 103 "run mmcload nfsargs addip addargs ; " \ 104 "bootm ${kernel_addr_r}\0" \ 105 "net_mmc=" \ 106 "run netload mmcargs addargs ; " \ 107 "bootm ${kernel_addr_r}\0" \ 108 "net_nfs=" \ 109 "run netload nfsargs addip addargs ; " \ 110 "bootm ${kernel_addr_r}\0" \ 111 "try_bootscript=" \ 112 "mmc rescan;" \ 113 "if test -e mmc 0:2 ${bootscript} ; then " \ 114 "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ 115 "then ; " \ 116 "echo Running bootscript... ; " \ 117 "source ${kernel_addr_r} ; " \ 118 "fi ; " \ 119 "fi\0" 120 121 /* The rest of the configuration is shared */ 122 #include <configs/socfpga_common.h> 123 124 #endif /* __CONFIG_DENX_MCVEVK_H__ */ 125