1 /* 2 * (C) Copyright 2009-2014 3 * Gerald Kerma <dreagle@doukki.net> 4 * Marvell Semiconductor <www.marvell.com> 5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _CONFIG_SHEEVAPLUG_H 11 #define _CONFIG_SHEEVAPLUG_H 12 13 /* 14 * Version number information 15 */ 16 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" 17 18 /* 19 * High Level Configuration Options (easy to change) 20 */ 21 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 22 #define CONFIG_KW88F6281 1 /* SOC Name */ 23 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */ 24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 25 26 /* 27 * Compression configuration 28 */ 29 #define CONFIG_BZIP2 30 #define CONFIG_LZMA 31 #define CONFIG_LZO 32 33 /* 34 * Commands configuration 35 */ 36 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 37 #include <config_cmd_default.h> 38 #define CONFIG_CMD_BOOTZ 39 #define CONFIG_CMD_DHCP 40 #define CONFIG_CMD_ENV 41 #define CONFIG_CMD_IDE 42 #define CONFIG_CMD_MII 43 #define CONFIG_CMD_MMC 44 #define CONFIG_CMD_NAND 45 #define CONFIG_CMD_PING 46 #define CONFIG_CMD_USB 47 /* 48 * mv-common.h should be defined after CMD configs since it used them 49 * to enable certain macros 50 */ 51 #include "mv-common.h" 52 53 /* 54 * Environment variables configurations 55 */ 56 #ifdef CONFIG_CMD_NAND 57 #define CONFIG_ENV_IS_IN_NAND 1 58 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 59 #else 60 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 61 #endif 62 /* 63 * max 4k env size is enough, but in case of nand 64 * it has to be rounded to sector size 65 */ 66 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 67 #define CONFIG_ENV_ADDR 0x80000 68 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ 69 70 /* 71 * Default environment variables 72 */ 73 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 74 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 75 "${x_bootcmd_usb}; bootm 0x6400000;" 76 77 #define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \ 78 "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0" 79 80 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 81 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ 82 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 83 "x_bootcmd_usb=usb start\0" \ 84 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" 85 86 /* 87 * Ethernet Driver configuration 88 */ 89 #ifdef CONFIG_CMD_NET 90 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 91 #define CONFIG_PHY_BASE_ADR 0 92 #endif /* CONFIG_CMD_NET */ 93 94 /* 95 * SDIO/MMC Card Configuration 96 */ 97 #ifdef CONFIG_CMD_MMC 98 #define CONFIG_MMC 99 #define CONFIG_GENERIC_MMC 100 #define CONFIG_MVEBU_MMC 101 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 102 #endif /* CONFIG_CMD_MMC */ 103 104 /* 105 * SATA driver configuration 106 */ 107 #ifdef CONFIG_CMD_IDE 108 #define __io 109 #define CONFIG_IDE_PREINIT 110 #define CONFIG_DOS_PARTITION 111 #define CONFIG_MVSATA_IDE_USE_PORT0 112 #define CONFIG_MVSATA_IDE_USE_PORT1 113 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 114 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 115 #endif /* CONFIG_CMD_IDE */ 116 117 /* 118 * File system 119 */ 120 #define CONFIG_CMD_EXT2 121 #define CONFIG_CMD_EXT4 122 #define CONFIG_CMD_FAT 123 #define CONFIG_CMD_JFFS2 124 #define CONFIG_CMD_UBI 125 #define CONFIG_CMD_UBIFS 126 #define CONFIG_RBTREE 127 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 128 #define CONFIG_MTD_PARTITIONS 129 #define CONFIG_CMD_MTDPARTS 130 #define CONFIG_LZO 131 132 #endif /* _CONFIG_SHEEVAPLUG_H */ 133