1 /* 2 * Copyright 2007,2009 Wind River Systems <www.windriver.com> 3 * Copyright 2007 Embedded Specialties, Inc. 4 * Copyright 2004, 2007 Freescale Semiconductor. 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 /* 26 * sbc8548 board configuration file 27 * Please refer to doc/README.sbc8548 for more info. 28 */ 29 #ifndef __CONFIG_H 30 #define __CONFIG_H 31 32 /* 33 * Top level Makefile configuration choices 34 */ 35 #ifdef CONFIG_PCI 36 #define CONFIG_PCI1 37 #endif 38 39 #ifdef CONFIG_66 40 #define CONFIG_SYS_CLK_DIV 1 41 #endif 42 43 #ifdef CONFIG_33 44 #define CONFIG_SYS_CLK_DIV 2 45 #endif 46 47 #ifdef CONFIG_PCIE 48 #define CONFIG_PCIE1 49 #endif 50 51 /* 52 * High Level Configuration Options 53 */ 54 #define CONFIG_BOOKE 1 /* BOOKE */ 55 #define CONFIG_E500 1 /* BOOKE e500 family */ 56 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 57 #define CONFIG_MPC8548 1 /* MPC8548 specific */ 58 #define CONFIG_SBC8548 1 /* SBC8548 board specific */ 59 60 /* 61 * If you want to boot from the SODIMM flash, instead of the soldered 62 * on flash, set this, and change JP12, SW2:8 accordingly. 63 */ 64 #undef CONFIG_SYS_ALT_BOOT 65 66 #ifndef CONFIG_SYS_TEXT_BASE 67 #ifdef CONFIG_SYS_ALT_BOOT 68 #define CONFIG_SYS_TEXT_BASE 0xfff00000 69 #else 70 #define CONFIG_SYS_TEXT_BASE 0xfffa0000 71 #endif 72 #endif 73 74 #undef CONFIG_RIO 75 76 #ifdef CONFIG_PCI 77 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 78 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 79 #endif 80 #ifdef CONFIG_PCIE1 81 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 82 #endif 83 84 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 85 #define CONFIG_ENV_OVERWRITE 86 87 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ 88 89 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 90 91 /* 92 * Below assumes that CCB:SYSCLK remains unchanged at 6:1 via SW2:[1-4] 93 */ 94 #ifndef CONFIG_SYS_CLK_DIV 95 #define CONFIG_SYS_CLK_DIV 1 /* 2, if 33MHz PCI card installed */ 96 #endif 97 #define CONFIG_SYS_CLK_FREQ (66000000 / CONFIG_SYS_CLK_DIV) 98 99 /* 100 * These can be toggled for performance analysis, otherwise use default. 101 */ 102 #define CONFIG_L2_CACHE /* toggle L2 cache */ 103 #define CONFIG_BTB /* toggle branch predition */ 104 105 /* 106 * Only possible on E500 Version 2 or newer cores. 107 */ 108 #define CONFIG_ENABLE_36BIT_PHYS 1 109 110 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 111 112 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 113 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 114 #define CONFIG_SYS_MEMTEST_END 0x00400000 115 116 #define CONFIG_SYS_CCSRBAR 0xe0000000 117 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 118 119 /* DDR Setup */ 120 #define CONFIG_FSL_DDR2 121 #undef CONFIG_FSL_DDR_INTERACTIVE 122 #undef CONFIG_DDR_ECC /* only for ECC DDR module */ 123 /* 124 * A hardware errata caused the LBC SDRAM SPD and the DDR2 SPD 125 * to collide, meaning you couldn't reliably read either. So 126 * physically remove the LBC PC100 SDRAM module from the board 127 * before enabling the two SPD options below. 128 */ 129 #undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 130 #undef CONFIG_DDR_SPD 131 132 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 133 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 134 135 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 136 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 137 #define CONFIG_VERY_BIG_RAM 138 139 #define CONFIG_NUM_DDR_CONTROLLERS 1 140 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 141 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 142 143 /* I2C addresses of SPD EEPROMs */ 144 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 145 146 /* 147 * Make sure required options are set 148 */ 149 #ifndef CONFIG_SPD_EEPROM 150 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 151 #endif 152 153 #undef CONFIG_CLOCKS_IN_MHZ 154 155 /* 156 * FLASH on the Local Bus 157 * Two banks, one 8MB the other 64MB, using the CFI driver. 158 * JP12+SW2.8 are used to swap CS0 and CS6, defaults are to have 159 * CS0 the 8MB boot flash, and CS6 the 64MB flash. 160 * 161 * Default: 162 * ec00_0000 efff_ffff 64MB SODIMM 163 * ff80_0000 ffff_ffff 8MB soldered flash 164 * 165 * Alternate: 166 * ef80_0000 efff_ffff 8MB soldered flash 167 * fc00_0000 ffff_ffff 64MB SODIMM 168 * 169 * BR0_8M: 170 * Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0 171 * Port Size = 8 bits = BRx[19:20] = 01 172 * Use GPCM = BRx[24:26] = 000 173 * Valid = BRx[31] = 1 174 * 175 * BR0_64M: 176 * Base address 0 = 0xfc00_0000 = BR0[0:16] = 1111 1100 0000 0000 0 177 * Port Size = 32 bits = BRx[19:20] = 11 178 * 179 * 0 4 8 12 16 20 24 28 180 * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801 BR0_8M 181 * 1111 1100 0000 0000 0001 1000 0000 0001 = fc001801 BR0_64M 182 */ 183 #define CONFIG_SYS_BR0_8M 0xff800801 184 #define CONFIG_SYS_BR0_64M 0xfc001801 185 186 /* 187 * BR6_8M: 188 * Base address 6 = 0xef80_0000 = BR6[0:16] = 1110 1111 1000 0000 0 189 * Port Size = 8 bits = BRx[19:20] = 01 190 * Use GPCM = BRx[24:26] = 000 191 * Valid = BRx[31] = 1 192 193 * BR6_64M: 194 * Base address 6 = 0xec00_0000 = BR6[0:16] = 1110 1100 0000 0000 0 195 * Port Size = 32 bits = BRx[19:20] = 11 196 * 197 * 0 4 8 12 16 20 24 28 198 * 1110 1111 1000 0000 0000 1000 0000 0001 = ef800801 BR6_8M 199 * 1110 1100 0000 0000 0001 1000 0000 0001 = ec001801 BR6_64M 200 */ 201 #define CONFIG_SYS_BR6_8M 0xef800801 202 #define CONFIG_SYS_BR6_64M 0xec001801 203 204 /* 205 * OR0_8M: 206 * Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0 207 * XAM = OR0[17:18] = 11 208 * CSNT = OR0[20] = 1 209 * ACS = half cycle delay = OR0[21:22] = 11 210 * SCY = 6 = OR0[24:27] = 0110 211 * TRLX = use relaxed timing = OR0[29] = 1 212 * EAD = use external address latch delay = OR0[31] = 1 213 * 214 * OR0_64M: 215 * Addr Mask = 64M = OR1[0:16] = 1111 1100 0000 0000 0 216 * 217 * 218 * 0 4 8 12 16 20 24 28 219 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 OR0_8M 220 * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65 OR0_64M 221 */ 222 #define CONFIG_SYS_OR0_8M 0xff806e65 223 #define CONFIG_SYS_OR0_64M 0xfc006e65 224 225 /* 226 * OR6_8M: 227 * Addr Mask = 8M = OR6[0:16] = 1111 1111 1000 0000 0 228 * XAM = OR6[17:18] = 11 229 * CSNT = OR6[20] = 1 230 * ACS = half cycle delay = OR6[21:22] = 11 231 * SCY = 6 = OR6[24:27] = 0110 232 * TRLX = use relaxed timing = OR6[29] = 1 233 * EAD = use external address latch delay = OR6[31] = 1 234 * 235 * OR6_64M: 236 * Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0 237 * 238 * 0 4 8 12 16 20 24 28 239 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 OR6_8M 240 * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65 OR6_64M 241 */ 242 #define CONFIG_SYS_OR6_8M 0xff806e65 243 #define CONFIG_SYS_OR6_64M 0xfc006e65 244 245 #ifndef CONFIG_SYS_ALT_BOOT /* JP12 in default position */ 246 #define CONFIG_SYS_BOOT_BLOCK 0xff800000 /* start of 8MB Flash */ 247 #define CONFIG_SYS_ALT_FLASH 0xec000000 /* 64MB "user" flash */ 248 249 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_BR0_8M 250 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_OR0_8M 251 252 #define CONFIG_SYS_BR6_PRELIM CONFIG_SYS_BR6_64M 253 #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_OR6_64M 254 #else /* JP12 in alternate position */ 255 #define CONFIG_SYS_BOOT_BLOCK 0xfc000000 /* start 64MB Flash */ 256 #define CONFIG_SYS_ALT_FLASH 0xef800000 /* 8MB soldered flash */ 257 258 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_BR0_64M 259 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_OR0_64M 260 261 #define CONFIG_SYS_BR6_PRELIM CONFIG_SYS_BR6_8M 262 #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_OR6_8M 263 #endif 264 265 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK 266 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ 267 CONFIG_SYS_ALT_FLASH} 268 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 269 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ 270 #undef CONFIG_SYS_FLASH_CHECKSUM 271 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 272 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 273 274 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 275 276 #define CONFIG_FLASH_CFI_DRIVER 277 #define CONFIG_SYS_FLASH_CFI 278 #define CONFIG_SYS_FLASH_EMPTY_INFO 279 280 /* CS5 = Local bus peripherals controlled by the EPLD */ 281 282 #define CONFIG_SYS_BR5_PRELIM 0xf8000801 283 #define CONFIG_SYS_OR5_PRELIM 0xff006e65 284 #define CONFIG_SYS_EPLD_BASE 0xf8000000 285 #define CONFIG_SYS_LED_DISP_BASE 0xf8000000 286 #define CONFIG_SYS_USER_SWITCHES_BASE 0xf8100000 287 #define CONFIG_SYS_BD_REV 0xf8300000 288 #define CONFIG_SYS_EEPROM_BASE 0xf8b00000 289 290 /* 291 * SDRAM on the Local Bus (CS3 and CS4) 292 * Note that most boards have a hardware errata where both the 293 * LBC SDRAM and the DDR2 SDRAM decode at 0x51, making it impossible 294 * to use CONFIG_DDR_SPD unless you physically remove the LBC DIMM. 295 */ 296 #ifndef CONFIG_DDR_SPD 297 #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ 298 #define CONFIG_SYS_LBC_SDRAM_SIZE 128 /* LBC SDRAM is 128MB */ 299 #endif 300 301 /* 302 * Base Register 3 and Option Register 3 configure the 1st 1/2 SDRAM. 303 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. 304 * 305 * For BR3, need: 306 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 307 * port-size = 32-bits = BR2[19:20] = 11 308 * no parity checking = BR2[21:22] = 00 309 * SDRAM for MSEL = BR2[24:26] = 011 310 * Valid = BR[31] = 1 311 * 312 * 0 4 8 12 16 20 24 28 313 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 314 * 315 */ 316 317 #define CONFIG_SYS_BR3_PRELIM 0xf0001861 318 319 /* 320 * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64. 321 * 322 * For OR3, need: 323 * 64MB mask for AM, OR3[0:7] = 1111 1100 324 * XAM, OR3[17:18] = 11 325 * 10 columns OR3[19-21] = 011 326 * 12 rows OR3[23-25] = 011 327 * EAD set for extra time OR[31] = 0 328 * 329 * 0 4 8 12 16 20 24 28 330 * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0 331 */ 332 333 #define CONFIG_SYS_OR3_PRELIM 0xfc006cc0 334 335 /* 336 * Base Register 4 and Option Register 4 configure the 2nd 1/2 SDRAM. 337 * The base address, (SDRAM_BASE + 1/2*SIZE), is 0xf4000000. 338 * 339 * For BR4, need: 340 * Base address of 0xf4000000 = BR[0:16] = 1111 0100 0000 0000 0 341 * port-size = 32-bits = BR2[19:20] = 11 342 * no parity checking = BR2[21:22] = 00 343 * SDRAM for MSEL = BR2[24:26] = 011 344 * Valid = BR[31] = 1 345 * 346 * 0 4 8 12 16 20 24 28 347 * 1111 0000 0000 0000 0001 1000 0110 0001 = f4001861 348 * 349 */ 350 351 #define CONFIG_SYS_BR4_PRELIM 0xf4001861 352 353 /* 354 * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64. 355 * 356 * For OR4, need: 357 * 64MB mask for AM, OR3[0:7] = 1111 1100 358 * XAM, OR3[17:18] = 11 359 * 10 columns OR3[19-21] = 011 360 * 12 rows OR3[23-25] = 011 361 * EAD set for extra time OR[31] = 0 362 * 363 * 0 4 8 12 16 20 24 28 364 * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0 365 */ 366 367 #define CONFIG_SYS_OR4_PRELIM 0xfc006cc0 368 369 #define CONFIG_SYS_LBC_LCRR 0x00000002 /* LB clock ratio reg */ 370 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ 371 #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ 372 #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ 373 374 /* 375 * Common settings for all Local Bus SDRAM commands. 376 */ 377 #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ 378 | LSDMR_BSMA1516 \ 379 | LSDMR_PRETOACT3 \ 380 | LSDMR_ACTTORW3 \ 381 | LSDMR_BUFCMD \ 382 | LSDMR_BL8 \ 383 | LSDMR_WRC2 \ 384 | LSDMR_CL3 \ 385 ) 386 387 #define CONFIG_SYS_LBC_LSDMR_PCHALL \ 388 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) 389 #define CONFIG_SYS_LBC_LSDMR_ARFRSH \ 390 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) 391 #define CONFIG_SYS_LBC_LSDMR_MRW \ 392 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) 393 #define CONFIG_SYS_LBC_LSDMR_RFEN \ 394 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_RFEN) 395 396 #define CONFIG_SYS_INIT_RAM_LOCK 1 397 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ 398 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ 399 400 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ 401 402 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 403 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 404 405 /* 406 * For soldered on flash, (128kB/sector) we use 2 sectors for u-boot and 407 * one for env+bootpg (CONFIG_SYS_TEXT_BASE=0xfffa_0000, 384kB total). For SODIMM 408 * flash (512kB/sector) we use 1 sector for u-boot, and one for env+bootpg 409 * (CONFIG_SYS_TEXT_BASE=0xfff0_0000, 1MB total). This dynamically sets the right 410 * thing for MONITOR_LEN in both cases. 411 */ 412 #define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1) 413 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 414 415 /* Serial Port */ 416 #define CONFIG_CONS_INDEX 1 417 #define CONFIG_SYS_NS16550 418 #define CONFIG_SYS_NS16550_SERIAL 419 #define CONFIG_SYS_NS16550_REG_SIZE 1 420 #define CONFIG_SYS_NS16550_CLK (400000000 / CONFIG_SYS_CLK_DIV) 421 422 #define CONFIG_SYS_BAUDRATE_TABLE \ 423 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 424 425 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 426 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 427 428 /* Use the HUSH parser */ 429 #define CONFIG_SYS_HUSH_PARSER 430 #ifdef CONFIG_SYS_HUSH_PARSER 431 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 432 #endif 433 434 /* pass open firmware flat tree */ 435 #define CONFIG_OF_LIBFDT 1 436 #define CONFIG_OF_BOARD_SETUP 1 437 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 438 439 /* 440 * I2C 441 */ 442 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 443 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 444 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 445 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 446 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 447 #define CONFIG_SYS_I2C_SLAVE 0x7F 448 #define CONFIG_SYS_I2C_OFFSET 0x3000 449 450 /* 451 * General PCI 452 * Memory space is mapped 1-1, but I/O space must start from 0. 453 */ 454 #define CONFIG_SYS_PCI_VIRT 0x80000000 /* 1G PCI TLB */ 455 #define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */ 456 457 #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 458 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 459 #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 460 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ 461 #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 462 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 463 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 464 #define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 8M */ 465 466 #ifdef CONFIG_PCIE1 467 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 468 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 469 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 470 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 471 #define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000 472 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 473 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 474 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ 475 #endif 476 477 #ifdef CONFIG_RIO 478 /* 479 * RapidIO MMU 480 */ 481 #define CONFIG_SYS_RIO_MEM_BASE 0xC0000000 482 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */ 483 #endif 484 485 #if defined(CONFIG_PCI) 486 487 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 488 489 #undef CONFIG_EEPRO100 490 #undef CONFIG_TULIP 491 492 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 493 494 #endif /* CONFIG_PCI */ 495 496 497 #if defined(CONFIG_TSEC_ENET) 498 499 #define CONFIG_MII 1 /* MII PHY management */ 500 #define CONFIG_TSEC1 1 501 #define CONFIG_TSEC1_NAME "eTSEC0" 502 #define CONFIG_TSEC2 1 503 #define CONFIG_TSEC2_NAME "eTSEC1" 504 #undef CONFIG_MPC85XX_FEC 505 506 #define TSEC1_PHY_ADDR 0x19 507 #define TSEC2_PHY_ADDR 0x1a 508 509 #define TSEC1_PHYIDX 0 510 #define TSEC2_PHYIDX 0 511 512 #define TSEC1_FLAGS TSEC_GIGABIT 513 #define TSEC2_FLAGS TSEC_GIGABIT 514 515 /* Options are: eTSEC[0-3] */ 516 #define CONFIG_ETHPRIME "eTSEC0" 517 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 518 #endif /* CONFIG_TSEC_ENET */ 519 520 /* 521 * Environment 522 */ 523 #define CONFIG_ENV_IS_IN_FLASH 1 524 #define CONFIG_ENV_SIZE 0x2000 525 #if CONFIG_SYS_TEXT_BASE == 0xfff00000 /* Boot from 64MB SODIMM */ 526 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x80000) 527 #define CONFIG_ENV_SECT_SIZE 0x80000 /* 512K(one sector) for env */ 528 #elif CONFIG_SYS_TEXT_BASE == 0xfffa0000 /* Boot from 8MB soldered flash */ 529 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) 530 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 531 #else 532 #warning undefined environment size/location. 533 #endif 534 535 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 536 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 537 538 /* 539 * BOOTP options 540 */ 541 #define CONFIG_BOOTP_BOOTFILESIZE 542 #define CONFIG_BOOTP_BOOTPATH 543 #define CONFIG_BOOTP_GATEWAY 544 #define CONFIG_BOOTP_HOSTNAME 545 546 547 /* 548 * Command line configuration. 549 */ 550 #include <config_cmd_default.h> 551 552 #define CONFIG_CMD_PING 553 #define CONFIG_CMD_I2C 554 #define CONFIG_CMD_MII 555 #define CONFIG_CMD_ELF 556 #define CONFIG_CMD_REGINFO 557 558 #if defined(CONFIG_PCI) 559 #define CONFIG_CMD_PCI 560 #endif 561 562 563 #undef CONFIG_WATCHDOG /* watchdog disabled */ 564 565 /* 566 * Miscellaneous configurable options 567 */ 568 #define CONFIG_CMDLINE_EDITING /* undef to save memory */ 569 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 570 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 571 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 572 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 573 #if defined(CONFIG_CMD_KGDB) 574 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 575 #else 576 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 577 #endif 578 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 579 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 580 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 581 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 582 583 /* 584 * For booting Linux, the board info and command line data 585 * have to be in the first 8 MB of memory, since this is 586 * the maximum mapped by the Linux kernel during initialization. 587 */ 588 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 589 590 #if defined(CONFIG_CMD_KGDB) 591 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 592 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 593 #endif 594 595 /* 596 * Environment Configuration 597 */ 598 599 /* The mac addresses for all ethernet interface */ 600 #if defined(CONFIG_TSEC_ENET) 601 #define CONFIG_HAS_ETH0 602 #define CONFIG_ETHADDR 02:E0:0C:00:00:FD 603 #define CONFIG_HAS_ETH1 604 #define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD 605 #endif 606 607 #define CONFIG_IPADDR 192.168.0.55 608 609 #define CONFIG_HOSTNAME sbc8548 610 #define CONFIG_ROOTPATH "/opt/eldk/ppc_85xx" 611 #define CONFIG_BOOTFILE "/uImage" 612 #define CONFIG_UBOOTPATH /u-boot.bin /* TFTP server */ 613 614 #define CONFIG_SERVERIP 192.168.0.2 615 #define CONFIG_GATEWAYIP 192.168.0.1 616 #define CONFIG_NETMASK 255.255.255.0 617 618 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ 619 620 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 621 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 622 623 #define CONFIG_BAUDRATE 115200 624 625 #define CONFIG_EXTRA_ENV_SETTINGS \ 626 "netdev=eth0\0" \ 627 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 628 "tftpflash=tftpboot $loadaddr $uboot; " \ 629 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 630 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 631 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 632 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 633 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 634 "consoledev=ttyS0\0" \ 635 "ramdiskaddr=2000000\0" \ 636 "ramdiskfile=uRamdisk\0" \ 637 "fdtaddr=c00000\0" \ 638 "fdtfile=sbc8548.dtb\0" 639 640 #define CONFIG_NFSBOOTCOMMAND \ 641 "setenv bootargs root=/dev/nfs rw " \ 642 "nfsroot=$serverip:$rootpath " \ 643 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 644 "console=$consoledev,$baudrate $othbootargs;" \ 645 "tftp $loadaddr $bootfile;" \ 646 "tftp $fdtaddr $fdtfile;" \ 647 "bootm $loadaddr - $fdtaddr" 648 649 650 #define CONFIG_RAMBOOTCOMMAND \ 651 "setenv bootargs root=/dev/ram rw " \ 652 "console=$consoledev,$baudrate $othbootargs;" \ 653 "tftp $ramdiskaddr $ramdiskfile;" \ 654 "tftp $loadaddr $bootfile;" \ 655 "tftp $fdtaddr $fdtfile;" \ 656 "bootm $loadaddr $ramdiskaddr $fdtaddr" 657 658 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 659 660 #endif /* __CONFIG_H */ 661