1 /* 2 * Configuration settings for the mini-box PICOSAM9G45 board. 3 * (C) Copyright 2015 Inter Act B.V. 4 * 5 * Based on: 6 * U-Boot file: include/configs/at91sam9m10g45ek.h 7 * (C) Copyright 2007-2008 8 * Stelian Pop <stelian@popies.net> 9 * Lead Tech Design <www.leadtechdesign.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include <asm/hardware.h> 18 19 #define CONFIG_SYS_TEXT_BASE 0x23f00000 20 21 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 22 23 /* ARM asynchronous clock */ 24 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 25 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 26 27 #define CONFIG_PICOSAM 28 29 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 30 #define CONFIG_SETUP_MEMORY_TAGS 31 #define CONFIG_INITRD_TAG 32 #define CONFIG_SKIP_LOWLEVEL_INIT 33 #define CONFIG_BOARD_EARLY_INIT_F 34 35 /* general purpose I/O */ 36 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 37 #define CONFIG_AT91_GPIO 38 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 39 40 /* serial console */ 41 #define CONFIG_ATMEL_USART 42 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 43 #define CONFIG_USART_ID ATMEL_ID_SYS 44 45 /* LCD */ 46 #define LCD_BPP LCD_COLOR8 47 #define CONFIG_LCD_LOGO 48 #undef LCD_TEST_PATTERN 49 #define CONFIG_LCD_INFO 50 #define CONFIG_LCD_INFO_BELOW_LOGO 51 #define CONFIG_SYS_WHITE_ON_BLACK 52 #define CONFIG_ATMEL_LCD 53 #define CONFIG_ATMEL_LCD_RGB565 54 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 55 /* board specific(not enough SRAM) */ 56 #define CONFIG_AT91SAM9G45_LCD_BASE 0x23E00000 57 58 /* LED */ 59 #define CONFIG_AT91_LED 60 #define CONFIG_GREEN_LED AT91_PIN_PD31 /* this is the user1 led */ 61 62 63 /* 64 * BOOTP options 65 */ 66 #define CONFIG_BOOTP_BOOTFILESIZE 67 #define CONFIG_BOOTP_BOOTPATH 68 #define CONFIG_BOOTP_GATEWAY 69 #define CONFIG_BOOTP_HOSTNAME 70 71 /* Enable the watchdog */ 72 #define CONFIG_AT91SAM9_WATCHDOG 73 #define CONFIG_HW_WATCHDOG 74 75 /* 76 * Command line configuration. 77 */ 78 79 /* No NOR flash */ 80 #define CONFIG_SYS_NO_FLASH 81 82 /* SDRAM */ 83 #define CONFIG_NR_DRAM_BANKS 2 84 #define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */ 85 #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ 86 #define PHYS_SDRAM_2 ATMEL_BASE_CS6 /* on DDRSDRC0 */ 87 #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ 88 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 89 90 #define CONFIG_SYS_INIT_SP_ADDR \ 91 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 92 93 /* MMC */ 94 95 #ifdef CONFIG_CMD_MMC 96 #define CONFIG_MMC 97 #define CONFIG_GENERIC_MMC 98 #define CONFIG_GENERIC_ATMEL_MCI 99 #endif 100 101 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) 102 #define CONFIG_DOS_PARTITION 103 #endif 104 105 /* Ethernet */ 106 #define CONFIG_MACB 107 #define CONFIG_RMII 108 #define CONFIG_NET_RETRY_COUNT 20 109 #define CONFIG_RESET_PHY_R 110 #define CONFIG_AT91_WANTS_COMMON_PHY 111 112 /* USB */ 113 #define CONFIG_USB_EHCI 114 #define CONFIG_USB_EHCI_ATMEL 115 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 116 117 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 118 119 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 120 #define CONFIG_SYS_MEMTEST_END 0x23e00000 121 122 #ifdef CONFIG_SYS_USE_MMC 123 /* bootstrap + u-boot + env + linux in mmc */ 124 #define FAT_ENV_INTERFACE "mmc" 125 /* 126 * We don't specify the part number, if device 0 has partition table, it means 127 * the first partition; it no partition table, then take whole device as a 128 * FAT file system. 129 */ 130 #define FAT_ENV_DEVICE_AND_PART "0" 131 #define FAT_ENV_FILE "uboot.env" 132 #define CONFIG_ENV_IS_IN_FAT 133 #define CONFIG_FAT_WRITE 134 #define CONFIG_ENV_SIZE 0x4000 135 136 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 137 "root=/dev/mmcblk0p2 rw rootwait" 138 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ 139 "fatload mmc 0:1 0x22000000 zImage; " \ 140 "bootz 0x22000000 - 0x21000000" 141 #endif 142 143 #define CONFIG_BAUDRATE 115200 144 145 #define CONFIG_SYS_CBSIZE 256 146 #define CONFIG_SYS_MAXARGS 16 147 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 148 + sizeof(CONFIG_SYS_PROMPT) + 16) 149 #define CONFIG_SYS_LONGHELP 150 #define CONFIG_CMDLINE_EDITING 151 #define CONFIG_AUTO_COMPLETE 152 153 /* 154 * Size of malloc() pool 155 */ 156 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 157 158 /* Defines for SPL */ 159 #define CONFIG_SPL_FRAMEWORK 160 #define CONFIG_SPL_TEXT_BASE 0x300000 161 #define CONFIG_SPL_MAX_SIZE 0x010000 162 #define CONFIG_SPL_STACK 0x310000 163 164 #define CONFIG_SYS_MONITOR_LEN 0x80000 165 166 #ifdef CONFIG_SYS_USE_MMC 167 168 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 169 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 170 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 171 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 172 173 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds 174 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 175 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 176 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 177 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 178 179 #define CONFIG_SPL_ATMEL_SIZE 180 #define CONFIG_SYS_MASTER_CLOCK 132096000 181 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 182 #define CONFIG_SYS_MCKR 0x1301 183 #define CONFIG_SYS_MCKR_CSS 0x1302 184 185 #endif 186 #endif 187