1 /* 2 * (C) Copyright 2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * This file contains the configuration parameters for the dbau1x00 board. 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #define CONFIG_PB1X00 1 16 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ 17 18 #ifdef CONFIG_PB1000 19 #define CONFIG_SOC_AU1000 1 20 #else 21 #ifdef CONFIG_PB1100 22 #define CONFIG_SOC_AU1100 1 23 #else 24 #ifdef CONFIG_PB1500 25 #define CONFIG_SOC_AU1500 1 26 #else 27 #error "No valid board set" 28 #endif 29 #endif 30 #endif 31 32 33 #define CONFIG_BAUDRATE 115200 34 35 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 36 #undef CONFIG_BOOTARGS 37 38 #define CONFIG_EXTRA_ENV_SETTINGS \ 39 "addmisc=setenv bootargs ${bootargs} " \ 40 "console=ttyS0,${baudrate} " \ 41 "panic=1\0" \ 42 "bootfile=/vmlinux.img\0" \ 43 "load=tftp 80500000 ${u-boot}\0" \ 44 "" 45 /* Boot from NFS root */ 46 #define CONFIG_BOOTCOMMAND "bootp; setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm" 47 48 /* 49 * Miscellaneous configurable options 50 */ 51 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 52 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 53 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 54 #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ 55 56 #define CONFIG_SYS_MALLOC_LEN 128*1024 57 58 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 59 60 #define CONFIG_SYS_MIPS_TIMER_FREQ 396000000 61 62 #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ 63 64 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ 65 66 #define CONFIG_SYS_MEMTEST_START 0x80100000 67 #undef CONFIG_SYS_MEMTEST_START 68 #define CONFIG_SYS_MEMTEST_START 0x80200000 69 #define CONFIG_SYS_MEMTEST_END 0x83800000 70 71 /*----------------------------------------------------------------------- 72 * FLASH and environment organization 73 */ 74 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 75 #define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ 76 77 #define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */ 78 #define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */ 79 80 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 81 #define CONFIG_SYS_MONITOR_LEN (192 << 10) 82 83 #define CONFIG_SYS_INIT_SP_OFFSET 0x4000000 84 85 /* We boot from this flash, selected with dip switch */ 86 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_2 87 88 /* timeout values are in ticks */ 89 #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ 90 #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ 91 92 #define CONFIG_ENV_IS_NOWHERE 1 93 94 /* Address and size of Primary Environment Sector */ 95 #define CONFIG_ENV_ADDR 0xB0030000 96 #define CONFIG_ENV_SIZE 0x10000 97 98 #define CONFIG_FLASH_16BIT 99 100 #define CONFIG_NR_DRAM_BANKS 2 101 102 #define CONFIG_MEMSIZE_IN_BYTES 103 104 /*---USB -------------------------------------------*/ 105 #if 0 106 #define CONFIG_USB_OHCI 107 #define CONFIG_DOS_PARTITION 108 #endif 109 110 /*---ATA PCMCIA ------------------------------------*/ 111 #if 0 112 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ 113 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000 114 #define CONFIG_PCMCIA_SLOT_A 115 116 #define CONFIG_ATAPI 1 117 #define CONFIG_MAC_PARTITION 1 118 119 /* We run CF in "true ide" mode or a harddrive via pcmcia */ 120 #define CONFIG_IDE_PCMCIA 1 121 122 /* We only support one slot for now */ 123 #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ 124 #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ 125 126 #undef CONFIG_IDE_LED /* LED for ide not supported */ 127 #undef CONFIG_IDE_RESET /* reset for ide not supported */ 128 129 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 130 131 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR 132 133 /* Offset for data I/O */ 134 #define CONFIG_SYS_ATA_DATA_OFFSET 8 135 136 /* Offset for normal register accesses */ 137 #define CONFIG_SYS_ATA_REG_OFFSET 0 138 139 /* Offset for alternate registers */ 140 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 141 142 #endif 143 144 /* 145 * BOOTP options 146 */ 147 #define CONFIG_BOOTP_BOOTFILESIZE 148 #define CONFIG_BOOTP_BOOTPATH 149 #define CONFIG_BOOTP_GATEWAY 150 #define CONFIG_BOOTP_HOSTNAME 151 152 /* 153 * Command line configuration. 154 */ 155 156 #undef CONFIG_CMD_IDE 157 #undef CONFIG_CMD_BEDBUG 158 159 #endif /* __CONFIG_H */ 160