1 /* 2 * (C) Copyright 2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * This file contains the configuration parameters for the dbau1x00 board. 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 #define CONFIG_MIPS32 1 /* MIPS32 CPU core */ 32 #define CONFIG_PB1X00 1 33 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ 34 35 #ifdef CONFIG_PB1000 36 #define CONFIG_SOC_AU1000 1 37 #else 38 #ifdef CONFIG_PB1100 39 #define CONFIG_SOC_AU1100 1 40 #else 41 #ifdef CONFIG_PB1500 42 #define CONFIG_SOC_AU1500 1 43 #else 44 #error "No valid board set" 45 #endif 46 #endif 47 #endif 48 49 #define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ 50 51 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ 52 53 #define CONFIG_BAUDRATE 115200 54 55 /* valid baudrates */ 56 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 57 58 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 59 #undef CONFIG_BOOTARGS 60 61 #define CONFIG_EXTRA_ENV_SETTINGS \ 62 "addmisc=setenv bootargs ${bootargs} " \ 63 "console=ttyS0,${baudrate} " \ 64 "panic=1\0" \ 65 "bootfile=/vmlinux.img\0" \ 66 "load=tftp 80500000 ${u-boot}\0" \ 67 "" 68 /* Boot from NFS root */ 69 #define CONFIG_BOOTCOMMAND "bootp; setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm" 70 71 /* 72 * Miscellaneous configurable options 73 */ 74 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 75 #define CONFIG_SYS_PROMPT "Pb1x00 # " /* Monitor Command Prompt */ 76 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 77 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 78 #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ 79 80 #define CONFIG_SYS_MALLOC_LEN 128*1024 81 82 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 83 84 #define CONFIG_SYS_MIPS_TIMER_FREQ 396000000 85 86 #define CONFIG_SYS_HZ 1000 87 88 #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ 89 90 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ 91 92 #define CONFIG_SYS_MEMTEST_START 0x80100000 93 #undef CONFIG_SYS_MEMTEST_START 94 #define CONFIG_SYS_MEMTEST_START 0x80200000 95 #define CONFIG_SYS_MEMTEST_END 0x83800000 96 97 /*----------------------------------------------------------------------- 98 * FLASH and environment organization 99 */ 100 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 101 #define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ 102 103 #define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */ 104 #define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */ 105 106 /* The following #defines are needed to get flash environment right */ 107 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE 108 #define CONFIG_SYS_MONITOR_LEN (192 << 10) 109 110 #define CONFIG_SYS_INIT_SP_OFFSET 0x4000000 111 112 /* We boot from this flash, selected with dip switch */ 113 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_2 114 115 /* timeout values are in ticks */ 116 #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ 117 #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ 118 119 #define CONFIG_ENV_IS_NOWHERE 1 120 121 /* Address and size of Primary Environment Sector */ 122 #define CONFIG_ENV_ADDR 0xB0030000 123 #define CONFIG_ENV_SIZE 0x10000 124 125 #define CONFIG_FLASH_16BIT 126 127 #define CONFIG_NR_DRAM_BANKS 2 128 129 #define CONFIG_NET_MULTI 130 131 #define CONFIG_MEMSIZE_IN_BYTES 132 133 134 /*---USB -------------------------------------------*/ 135 #if 0 136 #define CONFIG_USB_OHCI 137 #define CONFIG_USB_STORAGE 138 #define CONFIG_DOS_PARTITION 139 #endif 140 141 /*---ATA PCMCIA ------------------------------------*/ 142 #if 0 143 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ 144 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000 145 #define CONFIG_PCMCIA_SLOT_A 146 147 #define CONFIG_ATAPI 1 148 #define CONFIG_MAC_PARTITION 1 149 150 /* We run CF in "true ide" mode or a harddrive via pcmcia */ 151 #define CONFIG_IDE_PCMCIA 1 152 153 /* We only support one slot for now */ 154 #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ 155 #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ 156 157 #undef CONFIG_IDE_LED /* LED for ide not supported */ 158 #undef CONFIG_IDE_RESET /* reset for ide not supported */ 159 160 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 161 162 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR 163 164 /* Offset for data I/O */ 165 #define CONFIG_SYS_ATA_DATA_OFFSET 8 166 167 /* Offset for normal register accesses */ 168 #define CONFIG_SYS_ATA_REG_OFFSET 0 169 170 /* Offset for alternate registers */ 171 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 172 173 #endif 174 /*----------------------------------------------------------------------- 175 * Cache Configuration 176 */ 177 #define CONFIG_SYS_DCACHE_SIZE 16384 178 #define CONFIG_SYS_ICACHE_SIZE 16384 179 #define CONFIG_SYS_CACHELINE_SIZE 32 180 181 182 /* 183 * BOOTP options 184 */ 185 #define CONFIG_BOOTP_BOOTFILESIZE 186 #define CONFIG_BOOTP_BOOTPATH 187 #define CONFIG_BOOTP_GATEWAY 188 #define CONFIG_BOOTP_HOSTNAME 189 190 191 /* 192 * Command line configuration. 193 */ 194 #include <config_cmd_default.h> 195 196 #define CONFIG_CMD_DHCP 197 #define CONFIG_CMD_ELF 198 #define CONFIG_CMD_MII 199 #define CONFIG_CMD_PING 200 201 #undef CONFIG_CMD_SAVEENV 202 #undef CONFIG_CMD_FAT 203 #undef CONFIG_CMD_FLASH 204 #undef CONFIG_CMD_FPGA 205 #undef CONFIG_CMD_IDE 206 #undef CONFIG_CMD_LOADS 207 #undef CONFIG_CMD_RUN 208 #undef CONFIG_CMD_LOADB 209 #undef CONFIG_CMD_ELF 210 #undef CONFIG_CMD_BDI 211 #undef CONFIG_CMD_BEDBUG 212 213 #endif /* __CONFIG_H */ 214