xref: /rk3399_rockchip-uboot/include/configs/pb1x00.h (revision 97e305cfc19c26e762e0c9d00a164db81fe23dff)
1 /*
2  * (C) Copyright 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 /*
25  * This file contains the configuration parameters for the dbau1x00 board.
26  */
27 
28 #ifndef __CONFIG_H
29 #define __CONFIG_H
30 
31 #define CONFIG_MIPS32		1  /* MIPS32 CPU core	*/
32 #define CONFIG_PB1X00		1
33 #define CONFIG_SOC_AU1X00	1  /* alchemy series cpu */
34 
35 #ifdef CONFIG_PB1000
36 #define CONFIG_SOC_AU1000	1
37 #else
38 #ifdef CONFIG_PB1100
39 #define CONFIG_SOC_AU1100	1
40 #else
41 #ifdef CONFIG_PB1500
42 #define CONFIG_SOC_AU1500	1
43 #else
44 #error "No valid board set"
45 #endif
46 #endif
47 #endif
48 
49 #define CONFIG_SYS_LITTLE_ENDIAN
50 
51 #define CONFIG_ETHADDR		DE:AD:BE:EF:01:01    /* Ethernet address */
52 
53 #define CONFIG_BOOTDELAY	2	/* autoboot after 2 seconds	*/
54 
55 #define CONFIG_BAUDRATE		115200
56 
57 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
58 #undef	CONFIG_BOOTARGS
59 
60 #define	CONFIG_EXTRA_ENV_SETTINGS					\
61 	"addmisc=setenv bootargs ${bootargs} "				\
62 		"console=ttyS0,${baudrate} "				\
63 		"panic=1\0"						\
64 	"bootfile=/vmlinux.img\0"				\
65 	"load=tftp 80500000 ${u-boot}\0"				\
66 	""
67 /* Boot from NFS root */
68 #define CONFIG_BOOTCOMMAND	"bootp; setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm"
69 
70 /*
71  * Miscellaneous configurable options
72  */
73 #define	CONFIG_SYS_LONGHELP				/* undef to save memory      */
74 #define	CONFIG_SYS_PROMPT		"Pb1x00 # "	/* Monitor Command Prompt    */
75 #define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
76 #define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
77 #define	CONFIG_SYS_MAXARGS		16		/* max number of command args*/
78 
79 #define CONFIG_SYS_MALLOC_LEN		128*1024
80 
81 #define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
82 
83 #define CONFIG_SYS_MIPS_TIMER_FREQ	396000000
84 
85 #define CONFIG_SYS_HZ			1000
86 
87 #define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
88 
89 #define	CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
90 
91 #define CONFIG_SYS_MEMTEST_START	0x80100000
92 #undef CONFIG_SYS_MEMTEST_START
93 #define CONFIG_SYS_MEMTEST_START       0x80200000
94 #define CONFIG_SYS_MEMTEST_END		0x83800000
95 
96 /*-----------------------------------------------------------------------
97  * FLASH and environment organization
98  */
99 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
100 #define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
101 
102 #define PHYS_FLASH_1		0xbec00000 /* Flash Bank #1 */
103 #define PHYS_FLASH_2		0xbfc00000 /* Flash Bank #2 */
104 
105 /* The following #defines are needed to get flash environment right */
106 #define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
107 #define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
108 
109 #define CONFIG_SYS_INIT_SP_OFFSET	0x4000000
110 
111 /* We boot from this flash, selected with dip switch */
112 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_2
113 
114 /* timeout values are in ticks */
115 #define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
116 #define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
117 
118 #define	CONFIG_ENV_IS_NOWHERE	1
119 
120 /* Address and size of Primary Environment Sector	*/
121 #define CONFIG_ENV_ADDR		0xB0030000
122 #define CONFIG_ENV_SIZE		0x10000
123 
124 #define CONFIG_FLASH_16BIT
125 
126 #define CONFIG_NR_DRAM_BANKS	2
127 
128 
129 #define CONFIG_MEMSIZE_IN_BYTES
130 
131 
132 /*---USB -------------------------------------------*/
133 #if 0
134 #define CONFIG_USB_OHCI
135 #define CONFIG_USB_STORAGE
136 #define CONFIG_DOS_PARTITION
137 #endif
138 
139 /*---ATA PCMCIA ------------------------------------*/
140 #if 0
141 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
142 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
143 #define CONFIG_PCMCIA_SLOT_A
144 
145 #define CONFIG_ATAPI 1
146 #define CONFIG_MAC_PARTITION 1
147 
148 /* We run CF in "true ide" mode or a harddrive via pcmcia */
149 #define CONFIG_IDE_PCMCIA 1
150 
151 /* We only support one slot for now */
152 #define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
153 #define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
154 
155 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
156 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
157 
158 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
159 
160 #define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
161 
162 /* Offset for data I/O			*/
163 #define CONFIG_SYS_ATA_DATA_OFFSET     8
164 
165 /* Offset for normal register accesses  */
166 #define CONFIG_SYS_ATA_REG_OFFSET      0
167 
168 /* Offset for alternate registers       */
169 #define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
170 
171 #endif
172 /*-----------------------------------------------------------------------
173  * Cache Configuration
174  */
175 #define CONFIG_SYS_DCACHE_SIZE		16384
176 #define CONFIG_SYS_ICACHE_SIZE		16384
177 #define CONFIG_SYS_CACHELINE_SIZE	32
178 
179 
180 /*
181  * BOOTP options
182  */
183 #define CONFIG_BOOTP_BOOTFILESIZE
184 #define CONFIG_BOOTP_BOOTPATH
185 #define CONFIG_BOOTP_GATEWAY
186 #define CONFIG_BOOTP_HOSTNAME
187 
188 
189 /*
190  * Command line configuration.
191  */
192 #include <config_cmd_default.h>
193 
194 #define CONFIG_CMD_DHCP
195 #define CONFIG_CMD_ELF
196 #define CONFIG_CMD_MII
197 #define CONFIG_CMD_PING
198 
199 #undef CONFIG_CMD_SAVEENV
200 #undef CONFIG_CMD_FAT
201 #undef CONFIG_CMD_FLASH
202 #undef CONFIG_CMD_FPGA
203 #undef CONFIG_CMD_IDE
204 #undef CONFIG_CMD_LOADS
205 #undef CONFIG_CMD_RUN
206 #undef CONFIG_CMD_LOADB
207 #undef CONFIG_CMD_ELF
208 #undef CONFIG_CMD_BDI
209 #undef CONFIG_CMD_BEDBUG
210 
211 #endif	/* __CONFIG_H */
212