1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Author : 5 * Manikandan Pillai <mani.pillai@ti.com> 6 * Derived from Beagle Board and 3430 SDP code by 7 * Richard Woodruff <r-woodruff2@ti.com> 8 * Syed Mohammed Khasim <khasim@ti.com> 9 * 10 * Manikandan Pillai <mani.pillai@ti.com> 11 * 12 * Configuration settings for the TI OMAP3 EVM board. 13 * 14 * See file CREDITS for list of people who contributed to this 15 * project. 16 * 17 * This program is free software; you can redistribute it and/or 18 * modify it under the terms of the GNU General Public License as 19 * published by the Free Software Foundation; either version 2 of 20 * the License, or (at your option) any later version. 21 * 22 * This program is distributed in the hope that it will be useful, 23 * but WITHOUT ANY WARRANTY; without even the implied warranty of 24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 25 * GNU General Public License for more details. 26 * 27 * You should have received a copy of the GNU General Public License 28 * along with this program; if not, write to the Free Software 29 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 30 * MA 02111-1307 USA 31 */ 32 33 #ifndef __CONFIG_H 34 #define __CONFIG_H 35 #include <asm/sizes.h> 36 37 /* 38 * High Level Configuration Options 39 */ 40 #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ 41 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 42 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 43 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 44 #define CONFIG_OMAP3_EVM 1 /* working with EVM */ 45 46 #include <asm/arch/cpu.h> /* get chip and board defs */ 47 #include <asm/arch/omap3.h> 48 49 /* 50 * Display CPU and Board information 51 */ 52 #define CONFIG_DISPLAY_CPUINFO 1 53 #define CONFIG_DISPLAY_BOARDINFO 1 54 55 /* Clock Defines */ 56 #define V_OSCK 26000000 /* Clock output from T2 */ 57 #define V_SCLK (V_OSCK >> 1) 58 59 #undef CONFIG_USE_IRQ /* no support for IRQs */ 60 #define CONFIG_MISC_INIT_R 61 62 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 63 #define CONFIG_SETUP_MEMORY_TAGS 1 64 #define CONFIG_INITRD_TAG 1 65 #define CONFIG_REVISION_TAG 1 66 67 /* 68 * Size of malloc() pool 69 */ 70 #define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ 71 /* Sector */ 72 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) 73 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ 74 /* initial data */ 75 /* 76 * Hardware drivers 77 */ 78 79 /* 80 * NS16550 Configuration 81 */ 82 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 83 84 #define CONFIG_SYS_NS16550 85 #define CONFIG_SYS_NS16550_SERIAL 86 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 87 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 88 89 /* 90 * select serial console configuration 91 */ 92 #define CONFIG_CONS_INDEX 1 93 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 94 #define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ 95 96 /* allow to overwrite serial and ethaddr */ 97 #define CONFIG_ENV_OVERWRITE 98 #define CONFIG_BAUDRATE 115200 99 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 100 115200} 101 #define CONFIG_MMC 1 102 #define CONFIG_OMAP3_MMC 1 103 #define CONFIG_DOS_PARTITION 1 104 105 /* commands to include */ 106 #include <config_cmd_default.h> 107 108 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 109 #define CONFIG_CMD_FAT /* FAT support */ 110 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 111 112 #define CONFIG_CMD_I2C /* I2C serial bus support */ 113 #define CONFIG_CMD_MMC /* MMC support */ 114 #define CONFIG_CMD_ONENAND /* ONENAND support */ 115 #define CONFIG_CMD_DHCP 116 #define CONFIG_CMD_PING 117 118 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 119 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 120 #undef CONFIG_CMD_IMI /* iminfo */ 121 #undef CONFIG_CMD_IMLS /* List all found images */ 122 123 #define CONFIG_SYS_NO_FLASH 124 #define CONFIG_SYS_I2C_SPEED 100000 125 #define CONFIG_SYS_I2C_SLAVE 1 126 #define CONFIG_SYS_I2C_BUS 0 127 #define CONFIG_SYS_I2C_BUS_SELECT 1 128 #define CONFIG_DRIVER_OMAP34XX_I2C 1 129 130 /* 131 * Board NAND Info. 132 */ 133 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 134 /* to access nand */ 135 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 136 /* to access */ 137 /* nand at CS0 */ 138 139 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 140 /* NAND devices */ 141 #define SECTORSIZE 512 142 143 #define NAND_ALLOW_ERASE_ALL 144 #define ADDR_COLUMN 1 145 #define ADDR_PAGE 2 146 #define ADDR_COLUMN_PAGE 3 147 148 #define NAND_ChipID_UNKNOWN 0x00 149 #define NAND_MAX_FLOORS 1 150 #define NAND_MAX_CHIPS 1 151 #define NAND_NO_RB 1 152 #define CONFIG_SYS_NAND_WP 153 154 #define CONFIG_JFFS2_NAND 155 /* nand device jffs2 lives on */ 156 #define CONFIG_JFFS2_DEV "nand0" 157 /* start of jffs2 partition */ 158 #define CONFIG_JFFS2_PART_OFFSET 0x680000 159 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 160 161 /* Environment information */ 162 #define CONFIG_BOOTDELAY 10 163 164 #define CONFIG_EXTRA_ENV_SETTINGS \ 165 "loadaddr=0x82000000\0" \ 166 "console=ttyS2,115200n8\0" \ 167 "mmcargs=setenv bootargs console=${console} " \ 168 "root=/dev/mmcblk0p2 rw " \ 169 "rootfstype=ext3 rootwait\0" \ 170 "nandargs=setenv bootargs console=${console} " \ 171 "root=/dev/mtdblock4 rw " \ 172 "rootfstype=jffs2\0" \ 173 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 174 "bootscript=echo Running bootscript from mmc ...; " \ 175 "source ${loadaddr}\0" \ 176 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 177 "mmcboot=echo Booting from mmc ...; " \ 178 "run mmcargs; " \ 179 "bootm ${loadaddr}\0" \ 180 "nandboot=echo Booting from nand ...; " \ 181 "run nandargs; " \ 182 "onenand read ${loadaddr} 280000 400000; " \ 183 "bootm ${loadaddr}\0" \ 184 185 #define CONFIG_BOOTCOMMAND \ 186 "if mmc init; then " \ 187 "if run loadbootscript; then " \ 188 "run bootscript; " \ 189 "else " \ 190 "if run loaduimage; then " \ 191 "run mmcboot; " \ 192 "else run nandboot; " \ 193 "fi; " \ 194 "fi; " \ 195 "else run nandboot; fi" 196 197 #define CONFIG_AUTO_COMPLETE 1 198 /* 199 * Miscellaneous configurable options 200 */ 201 #define V_PROMPT "OMAP3_EVM # " 202 203 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 204 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 205 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 206 #define CONFIG_SYS_PROMPT V_PROMPT 207 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 208 /* Print Buffer Size */ 209 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 210 sizeof(CONFIG_SYS_PROMPT) + 16) 211 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 212 /* args */ 213 /* Boot Argument Buffer Size */ 214 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 215 /* memtest works on */ 216 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 217 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 218 0x01F00000) /* 31MB */ 219 220 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 221 /* address */ 222 223 /* 224 * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by 225 * 32KHz clk, or from external sig. This rate is divided by a local divisor. 226 */ 227 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 228 #define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ 229 #define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) 230 231 /*----------------------------------------------------------------------- 232 * Stack sizes 233 * 234 * The stack sizes are set up in start.S using the settings below 235 */ 236 #define CONFIG_STACKSIZE SZ_128K /* regular stack */ 237 #ifdef CONFIG_USE_IRQ 238 #define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ 239 #define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ 240 #endif 241 242 /*----------------------------------------------------------------------- 243 * Physical Memory Map 244 */ 245 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 246 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 247 #define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ 248 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 249 250 /* SDRAM Bank Allocation method */ 251 #define SDRC_R_B_C 1 252 253 /*----------------------------------------------------------------------- 254 * FLASH and environment organization 255 */ 256 257 /* **** PISMO SUPPORT *** */ 258 259 /* Configure the PISMO */ 260 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 261 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 262 263 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 264 /* on one chip */ 265 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 266 #define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ 267 268 #define CONFIG_SYS_FLASH_BASE boot_flash_base 269 270 /* Monitor at start of flash */ 271 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 272 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 273 274 #define CONFIG_ENV_IS_IN_ONENAND 1 275 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 276 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 277 278 #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec 279 #define CONFIG_ENV_OFFSET boot_flash_off 280 #define CONFIG_ENV_ADDR boot_flash_env_addr 281 282 /*----------------------------------------------------------------------- 283 * CFI FLASH driver setup 284 */ 285 /* timeout values are in ticks */ 286 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 287 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 288 289 /* Flash banks JFFS2 should use */ 290 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 291 CONFIG_SYS_MAX_NAND_DEVICE) 292 #define CONFIG_SYS_JFFS2_MEM_NAND 293 /* use flash_info[2] */ 294 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 295 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 296 297 #ifndef __ASSEMBLY__ 298 extern gpmc_csx_t *nand_cs_base; 299 extern gpmc_t *gpmc_cfg_base; 300 extern unsigned int boot_flash_base; 301 extern volatile unsigned int boot_flash_env_addr; 302 extern unsigned int boot_flash_off; 303 extern unsigned int boot_flash_sec; 304 extern unsigned int boot_flash_type; 305 #endif 306 307 308 #define WRITE_NAND_COMMAND(d, adr)\ 309 writel(d, &nand_cs_base->nand_cmd) 310 #define WRITE_NAND_ADDRESS(d, adr)\ 311 writel(d, &nand_cs_base->nand_adr) 312 #define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) 313 #define READ_NAND(adr) readl(&nand_cs_base->nand_dat) 314 315 /* Other NAND Access APIs */ 316 #define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ 317 while (0) 318 #define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ 319 while (0) 320 #define NAND_DISABLE_CE(nand) 321 #define NAND_ENABLE_CE(nand) 322 #define NAND_WAIT_READY(nand) udelay(10) 323 324 /*---------------------------------------------------------------------------- 325 * SMSC9115 Ethernet from SMSC9118 family 326 *---------------------------------------------------------------------------- 327 */ 328 #if defined(CONFIG_CMD_NET) 329 330 #define CONFIG_DRIVER_SMC911X 331 #define CONFIG_DRIVER_SMC911X_32_BIT 332 #define CONFIG_DRIVER_SMC911X_BASE 0x2C000000 333 334 #endif /* (CONFIG_CMD_NET) */ 335 336 /* 337 * BOOTP fields 338 */ 339 340 #define CONFIG_BOOTP_SUBNETMASK 0x00000001 341 #define CONFIG_BOOTP_GATEWAY 0x00000002 342 #define CONFIG_BOOTP_HOSTNAME 0x00000004 343 #define CONFIG_BOOTP_BOOTPATH 0x00000010 344 345 #endif /* __CONFIG_H */ 346