1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * Configuration settings for the TI OMAP3530 Beagle board. 8 * 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 /* 32 * High Level Configuration Options 33 */ 34 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 35 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 36 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 37 #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ 38 39 #define CONFIG_SDRC /* The chip has SDRC controller */ 40 41 #include <asm/arch/cpu.h> /* get chip and board defs */ 42 #include <asm/arch/omap3.h> 43 44 /* 45 * Display CPU and Board information 46 */ 47 #define CONFIG_DISPLAY_CPUINFO 1 48 #define CONFIG_DISPLAY_BOARDINFO 1 49 50 /* Clock Defines */ 51 #define V_OSCK 26000000 /* Clock output from T2 */ 52 #define V_SCLK (V_OSCK >> 1) 53 54 #undef CONFIG_USE_IRQ /* no support for IRQs */ 55 #define CONFIG_MISC_INIT_R 56 57 #define CONFIG_OF_LIBFDT 1 58 59 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 60 #define CONFIG_SETUP_MEMORY_TAGS 1 61 #define CONFIG_INITRD_TAG 1 62 #define CONFIG_REVISION_TAG 1 63 64 /* 65 * Size of malloc() pool 66 */ 67 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 68 /* Sector */ 69 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 70 71 /* 72 * Hardware drivers 73 */ 74 75 /* 76 * NS16550 Configuration 77 */ 78 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 79 80 #define CONFIG_SYS_NS16550 81 #define CONFIG_SYS_NS16550_SERIAL 82 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 83 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 84 85 /* 86 * select serial console configuration 87 */ 88 #define CONFIG_CONS_INDEX 3 89 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 90 #define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */ 91 92 /* allow to overwrite serial and ethaddr */ 93 #define CONFIG_ENV_OVERWRITE 94 #define CONFIG_BAUDRATE 115200 95 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 96 115200} 97 #define CONFIG_GENERIC_MMC 1 98 #define CONFIG_MMC 1 99 #define CONFIG_OMAP_HSMMC 1 100 #define CONFIG_DOS_PARTITION 1 101 102 /* Status LED */ 103 #define CONFIG_STATUS_LED 1 104 #define CONFIG_BOARD_SPECIFIC_LED 1 105 #define STATUS_LED_BIT 0x01 106 #define STATUS_LED_STATE STATUS_LED_ON 107 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) 108 #define STATUS_LED_BIT1 0x02 109 #define STATUS_LED_STATE1 STATUS_LED_ON 110 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) 111 #define STATUS_LED_BOOT STATUS_LED_BIT 112 #define STATUS_LED_GREEN STATUS_LED_BIT1 113 114 /* DDR - I use Micron DDR */ 115 #define CONFIG_OMAP3_MICRON_DDR 1 116 117 /* USB */ 118 #define CONFIG_MUSB_UDC 1 119 #define CONFIG_USB_OMAP3 1 120 #define CONFIG_TWL4030_USB 1 121 122 /* USB device configuration */ 123 #define CONFIG_USB_DEVICE 1 124 #define CONFIG_USB_TTY 1 125 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 126 127 /* USB EHCI */ 128 #define CONFIG_CMD_USB 129 #define CONFIG_USB_EHCI 130 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 131 #define CONFIG_USB_HOST_ETHER 132 #define CONFIG_USB_ETHER_SMSC95XX 133 #define CONFIG_USB_ETHER_ASIX 134 135 #define CONFIG_NET_MULTI 136 137 /* commands to include */ 138 #include <config_cmd_default.h> 139 140 #define CONFIG_CMD_CACHE 141 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 142 #define CONFIG_CMD_FAT /* FAT support */ 143 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 144 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 145 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 146 #define MTDIDS_DEFAULT "nand0=nand" 147 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 148 "1920k(u-boot),128k(u-boot-env),"\ 149 "4m(kernel),-(fs)" 150 151 #define CONFIG_CMD_I2C /* I2C serial bus support */ 152 #define CONFIG_CMD_MMC /* MMC support */ 153 #define CONFIG_USB_STORAGE /* USB storage support */ 154 #define CONFIG_CMD_NAND /* NAND support */ 155 #define CONFIG_CMD_LED /* LED support */ 156 #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 157 #define CONFIG_CMD_NFS /* NFS support */ 158 #define CONFIG_CMD_PING 159 #define CONFIG_CMD_DHCP 160 #define CONFIG_CMD_SETEXPR /* Evaluate expressions */ 161 162 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 163 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 164 #undef CONFIG_CMD_IMI /* iminfo */ 165 #undef CONFIG_CMD_IMLS /* List all found images */ 166 167 #define CONFIG_SYS_NO_FLASH 168 #define CONFIG_HARD_I2C 1 169 #define CONFIG_SYS_I2C_SPEED 100000 170 #define CONFIG_SYS_I2C_SLAVE 1 171 #define CONFIG_SYS_I2C_BUS 0 172 #define CONFIG_SYS_I2C_BUS_SELECT 1 173 #define CONFIG_I2C_MULTI_BUS 1 174 #define CONFIG_DRIVER_OMAP34XX_I2C 1 175 #define CONFIG_VIDEO_OMAP3 /* DSS Support */ 176 177 /* 178 * TWL4030 179 */ 180 #define CONFIG_TWL4030_POWER 1 181 #define CONFIG_TWL4030_LED 1 182 183 /* 184 * Board NAND Info. 185 */ 186 #define CONFIG_SYS_NAND_QUIET_TEST 1 187 #define CONFIG_NAND_OMAP_GPMC 188 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 189 /* to access nand */ 190 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 191 /* to access nand at */ 192 /* CS0 */ 193 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 194 195 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 196 /* devices */ 197 #define CONFIG_JFFS2_NAND 198 /* nand device jffs2 lives on */ 199 #define CONFIG_JFFS2_DEV "nand0" 200 /* start of jffs2 partition */ 201 #define CONFIG_JFFS2_PART_OFFSET 0x680000 202 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 203 /* partition */ 204 205 /* Environment information */ 206 #define CONFIG_BOOTDELAY 2 207 208 #define CONFIG_EXTRA_ENV_SETTINGS \ 209 "loadaddr=0x82000000\0" \ 210 "usbtty=cdc_acm\0" \ 211 "usbethaddr=de:ad:be:ef\0" \ 212 "bootfile=uImage.beagle\0" \ 213 "console=ttyS2,115200n8\0" \ 214 "mpurate=auto\0" \ 215 "buddy=none "\ 216 "optargs=\0" \ 217 "camera=none\0" \ 218 "vram=12M\0" \ 219 "dvimode=1024x768MR-16@60\0" \ 220 "defaultdisplay=dvi\0" \ 221 "mmcdev=0\0" \ 222 "mmcroot=/dev/mmcblk0p2 rw\0" \ 223 "mmcrootfstype=ext3 rootwait\0" \ 224 "nandroot=/dev/mtdblock4 rw\0" \ 225 "nandrootfstype=jffs2\0" \ 226 "mmcargs=setenv bootargs console=${console} " \ 227 "${optargs} " \ 228 "mpurate=${mpurate} " \ 229 "buddy=${buddy} "\ 230 "camera=${camera} "\ 231 "vram=${vram} " \ 232 "omapfb.mode=dvi:${dvimode} " \ 233 "omapdss.def_disp=${defaultdisplay} " \ 234 "root=${mmcroot} " \ 235 "rootfstype=${mmcrootfstype}\0" \ 236 "nandargs=setenv bootargs console=${console} " \ 237 "${optargs} " \ 238 "mpurate=${mpurate} " \ 239 "buddy=${buddy} "\ 240 "camera=${camera} "\ 241 "vram=${vram} " \ 242 "omapfb.mode=dvi:${dvimode} " \ 243 "omapdss.def_disp=${defaultdisplay} " \ 244 "root=${nandroot} " \ 245 "rootfstype=${nandrootfstype}\0" \ 246 "bootenv=uEnv.txt\0" \ 247 "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ 248 "importbootenv=echo Importing environment from mmc ...; " \ 249 "env import -t $loadaddr $filesize\0" \ 250 "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 251 "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \ 252 "mmcboot=echo Booting from mmc ...; " \ 253 "run mmcargs; " \ 254 "bootm ${loadaddr}\0" \ 255 "nandboot=echo Booting from nand ...; " \ 256 "run nandargs; " \ 257 "nand read ${loadaddr} 280000 400000; " \ 258 "bootm ${loadaddr}\0" \ 259 260 #define CONFIG_BOOTCOMMAND \ 261 "if mmc rescan ${mmcdev}; then " \ 262 "if userbutton; then " \ 263 "setenv bootenv user.txt;" \ 264 "fi;" \ 265 "echo SD/MMC found on device ${mmcdev};" \ 266 "if run loadbootenv; then " \ 267 "echo Loaded environment from ${bootenv};" \ 268 "run importbootenv;" \ 269 "fi;" \ 270 "if test -n $uenvcmd; then " \ 271 "echo Running uenvcmd ...;" \ 272 "run uenvcmd;" \ 273 "fi;" \ 274 "if run loaduimage; then " \ 275 "run mmcboot;" \ 276 "fi;" \ 277 "fi;" \ 278 "run nandboot;" \ 279 280 #define CONFIG_AUTO_COMPLETE 1 281 /* 282 * Miscellaneous configurable options 283 */ 284 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 285 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 286 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 287 #define CONFIG_SYS_PROMPT "OMAP3 beagleboard.org # " 288 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 289 /* Print Buffer Size */ 290 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 291 sizeof(CONFIG_SYS_PROMPT) + 16) 292 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 293 /* Boot Argument Buffer Size */ 294 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 295 296 #define CONFIG_SYS_ALT_MEMTEST 1 297 #define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */ 298 /* defaults */ 299 #define CONFIG_SYS_MEMTEST_END (0x87FFFFFF) /* 128MB */ 300 #define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ 301 302 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 303 /* load address */ 304 305 /* 306 * OMAP3 has 12 GP timers, they can be driven by the system clock 307 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 308 * This rate is divided by a local divisor. 309 */ 310 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 311 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 312 #define CONFIG_SYS_HZ 1000 313 314 /*----------------------------------------------------------------------- 315 * Stack sizes 316 * 317 * The stack sizes are set up in start.S using the settings below 318 */ 319 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 320 #ifdef CONFIG_USE_IRQ 321 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 322 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 323 #endif 324 325 /*----------------------------------------------------------------------- 326 * Physical Memory Map 327 */ 328 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 329 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 330 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 331 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 332 333 /* SDRAM Bank Allocation method */ 334 #define SDRC_R_B_C 1 335 336 /*----------------------------------------------------------------------- 337 * FLASH and environment organization 338 */ 339 340 /* **** PISMO SUPPORT *** */ 341 342 /* Configure the PISMO */ 343 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 344 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 345 346 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 347 348 #if defined(CONFIG_CMD_NAND) 349 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE 350 #endif 351 352 /* Monitor at start of flash */ 353 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 354 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 355 356 #define CONFIG_ENV_IS_IN_NAND 1 357 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 358 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 359 360 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 361 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 362 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 363 364 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 365 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 366 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 367 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 368 CONFIG_SYS_INIT_RAM_SIZE - \ 369 GENERATED_GBL_DATA_SIZE) 370 371 #define CONFIG_OMAP3_SPI 372 373 #endif /* __CONFIG_H */ 374