1 /* 2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 3 * 4 * based on work from: 5 * (C) Copyright 2009 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_NAS220_H 13 #define _CONFIG_NAS220_H 14 15 /* 16 * Machine type definition and ID 17 */ 18 #define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS 19 #define CONFIG_MACH_TYPE MACH_TYPE_NAS220 20 #define CONFIG_IDENT_STRING "\nNAS 220" 21 22 /* 23 * High Level Configuration Options (easy to change) 24 */ 25 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 26 #define CONFIG_KW88F6192 /* SOC Name */ 27 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 28 29 /* power-on led, regulator, sata0, sata1 */ 30 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 31 #define NAS220_GE_OE_VAL_HIGH (0) 32 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 33 #define NAS220_GE_OE_HIGH (~(0)) 34 35 /* PHY related */ 36 #define MV88E1116_LED_FCTRL_REG 10 37 #define MV88E1116_CPRSP_CR3_REG 21 38 #define MV88E1116_MAC_CTRL_REG 21 39 #define MV88E1116_PGADR_REG 22 40 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 41 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 42 43 /* 44 * Commands configuration 45 */ 46 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 47 #define CONFIG_CMD_MII 48 #define CONFIG_CMD_NAND 49 #define CONFIG_CMD_DATE 50 #define CONFIG_CMD_IDE 51 #define CONFIG_SYS_LONGHELP 52 #define CONFIG_AUTO_COMPLETE 53 #define CONFIG_CMDLINE_EDITING 54 55 /* 56 * mv-common.h should be defined after CMD configs since it used them 57 * to enable certain macros 58 */ 59 #include "mv-common.h" 60 61 /* 62 * Environment variables configurations 63 */ 64 #ifdef CONFIG_CMD_NAND 65 #define CONFIG_ENV_IS_IN_NAND 66 #define CONFIG_ENV_SECT_SIZE 0x10000 67 #else 68 #define CONFIG_ENV_IS_NOWHERE 69 #endif 70 71 #define CONFIG_ENV_SIZE 0x10000 72 #define CONFIG_ENV_OFFSET 0xa0000 73 74 /* 75 * Default environment variables 76 */ 77 #define CONFIG_BOOTCOMMAND "" 78 79 #define CONFIG_EXTRA_ENV_SETTINGS \ 80 "bootargs=console=ttyS0,115200\0" \ 81 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 82 "0x010000@0xa0000(env),"\ 83 "0x500000@0xc0000(uimage),"\ 84 "0x1a40000@0x5c0000(rootfs)\0" \ 85 "mtdids=nand0=orion_nand\0"\ 86 "bootdelay=-1\0"\ 87 "autostart=no\0"\ 88 "autoload=no\0" 89 90 /* 91 * Ethernet Driver configuration 92 */ 93 #ifdef CONFIG_CMD_NET 94 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 95 #define CONFIG_PHY_BASE_ADR 8 96 #endif /* CONFIG_CMD_NET */ 97 98 /* 99 * USB/EHCI 100 */ 101 #ifdef CONFIG_CMD_USB 102 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 103 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 104 #define CONFIG_EHCI_IS_TDI 105 #define CONFIG_USB_STORAGE 106 #define CONFIG_DOS_PARTITION 107 #define CONFIG_SUPPORT_VFAT 108 #endif /* CONFIG_CMD_USB */ 109 110 /* 111 * File system 112 */ 113 #define CONFIG_CMD_EXT2 114 #define CONFIG_CMD_EXT4 115 #define CONFIG_CMD_FAT 116 #define CONFIG_CMD_JFFS2 117 #define CONFIG_JFFS2_NAND 118 #define CONFIG_JFFS2_LZO 119 #define CONFIG_CMD_UBI 120 #define CONFIG_CMD_UBIFS 121 #define CONFIG_RBTREE 122 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 123 #define CONFIG_MTD_PARTITIONS 124 #define CONFIG_CMD_MTDPARTS 125 #define CONFIG_LZO 126 127 /* 128 * SATA 129 */ 130 #ifdef CONFIG_MVSATA_IDE 131 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 132 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 133 #endif 134 135 /* 136 * EFI partition 137 */ 138 #define CONFIG_EFI_PARTITION 139 140 /* 141 * Date Time 142 */ 143 #ifdef CONFIG_CMD_DATE 144 #define CONFIG_RTC_MV 145 #endif /* CONFIG_CMD_DATE */ 146 147 #define CONFIG_KIRKWOOD_GPIO 148 149 #endif /* _CONFIG_NAS220_H */ 150 151