1 /* 2 * Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG 3 * Patrick Bruenn <p.bruenn@beckhoff.com> 4 * 5 * Configuration settings for Beckhoff CX9020. 6 * 7 * Based on Freescale's Linux i.MX mx53loco.h file: 8 * Copyright (C) 2010-2011 Freescale Semiconductor. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include <asm/arch/imx-regs.h> 17 18 #define CONFIG_CMDLINE_TAG 19 #define CONFIG_SETUP_MEMORY_TAGS 20 #define CONFIG_INITRD_TAG 21 22 #define CONFIG_SYS_FSL_CLK 23 24 /* Size of malloc() pool */ 25 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 26 27 #define CONFIG_MXC_GPIO 28 #define CONFIG_REVISION_TAG 29 30 #define CONFIG_MXC_UART_BASE UART2_BASE 31 32 #define CONFIG_FPGA_COUNT 1 33 34 /* MMC Configs */ 35 #define CONFIG_FSL_ESDHC 36 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 37 #define CONFIG_SYS_FSL_ESDHC_NUM 2 38 39 /* bootz: zImage/initrd.img support */ 40 41 /* Eth Configs */ 42 #define CONFIG_MII 43 #define IMX_FEC_BASE FEC_BASE_ADDR 44 #define CONFIG_ETHPRIME "FEC0" 45 #define CONFIG_FEC_MXC_PHYADDR 0x1F 46 47 /* USB Configs */ 48 #define CONFIG_USB_EHCI_MX5 49 #define CONFIG_USB_ETHER_ASIX 50 #define CONFIG_USB_ETHER_MCS7830 51 #define CONFIG_USB_ETHER_SMSC95XX 52 #define CONFIG_MXC_USB_PORT 1 53 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 54 #define CONFIG_MXC_USB_FLAGS 0 55 56 /* allow to overwrite serial and ethaddr */ 57 #define CONFIG_ENV_OVERWRITE 58 #define CONFIG_CONS_INDEX 1 59 60 /* Command definition */ 61 #define CONFIG_SUPPORT_RAW_INITRD 62 63 #define CONFIG_LOADADDR 0x70010000 /* loadaddr env var */ 64 #define CONFIG_SYS_TEXT_BASE 0x77800000 65 66 #define CONFIG_EXTRA_ENV_SETTINGS \ 67 "fdt_addr_r=0x71ff0000\0" \ 68 "pxefile_addr_r=0x73000000\0" \ 69 "ramdisk_addr_r=0x72000000\0" \ 70 "console=ttymxc1,115200\0" \ 71 "uenv=/boot/uEnv.txt\0" \ 72 "optargs=\0" \ 73 "cmdline=\0" \ 74 "mmcdev=0\0" \ 75 "mmcpart=1\0" \ 76 "mmcrootfstype=ext4 rootwait fixrtc\0" \ 77 "mmcargs=setenv bootargs console=${console} " \ 78 "${optargs} " \ 79 "root=/dev/mmcblk${mmcdev}p${mmcpart} ro " \ 80 "rootfstype=${mmcrootfstype} " \ 81 "${cmdline}\0" \ 82 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ 83 "loadpxe=dhcp;setenv kernel_addr_r ${loadaddr};pxe get;pxe boot;\0" \ 84 "loadrd=load mmc ${bootpart} ${ramdisk_addr_r} ${bootdir}/${rdfile};" \ 85 "setenv rdsize ${filesize}\0" \ 86 "loadfdt=echo loading ${fdt_path} ...;" \ 87 "load mmc ${bootpart} ${fdt_addr_r} ${fdt_path}\0" \ 88 "mmcboot=mmc dev ${mmcdev}; " \ 89 "if mmc rescan; then " \ 90 "echo SD/MMC found on device ${mmcdev};" \ 91 "echo Checking for: ${uenv} ...;" \ 92 "setenv bootpart ${mmcdev}:${mmcpart};" \ 93 "if test -e mmc ${bootpart} ${uenv}; then " \ 94 "load mmc ${bootpart} ${loadaddr} ${uenv};" \ 95 "env import -t ${loadaddr} ${filesize};" \ 96 "echo Loaded environment from ${uenv};" \ 97 "if test -n ${dtb}; then " \ 98 "setenv fdt_file ${dtb};" \ 99 "echo Using: dtb=${fdt_file} ...;" \ 100 "fi;" \ 101 "echo Checking for uname_r in ${uenv}...;" \ 102 "if test -n ${uname_r}; then " \ 103 "echo Running uname_boot ...;" \ 104 "run uname_boot;" \ 105 "fi;" \ 106 "fi;" \ 107 "fi;\0" \ 108 "uname_boot="\ 109 "setenv bootdir /boot; " \ 110 "setenv bootfile vmlinuz-${uname_r}; " \ 111 "setenv ccatfile /boot/ccat.rbf; " \ 112 "echo loading CCAT firmware from ${ccatfile}; " \ 113 "load mmc ${bootpart} ${loadaddr} ${ccatfile}; " \ 114 "fpga load 0 ${loadaddr} ${filesize}; " \ 115 "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \ 116 "echo loading ${bootdir}/${bootfile} ...; " \ 117 "run loadimage;" \ 118 "setenv fdt_path /boot/dtbs/${uname_r}/${fdt_file}; " \ 119 "if test -e mmc ${bootpart} ${fdt_path}; then " \ 120 "run loadfdt;" \ 121 "else " \ 122 "echo; echo unable to find ${fdt_file} ...;" \ 123 "echo booting legacy ...;"\ 124 "run mmcargs;" \ 125 "echo debug: [${bootargs}] ... ;" \ 126 "echo debug: [bootz ${loadaddr}] ... ;" \ 127 "bootz ${loadaddr}; " \ 128 "fi;" \ 129 "run mmcargs;" \ 130 "echo debug: [${bootargs}] ... ;" \ 131 "echo debug: [bootz ${loadaddr} - ${fdt_addr_r}];" \ 132 "bootz ${loadaddr} - ${fdt_addr_r}; " \ 133 "else " \ 134 "echo loading from dhcp ...; " \ 135 "run loadpxe; " \ 136 "fi;\0" 137 138 #define CONFIG_BOOTCOMMAND \ 139 "run mmcboot;" 140 141 #define CONFIG_ARP_TIMEOUT 200UL 142 143 /* Miscellaneous configurable options */ 144 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 145 #define CONFIG_AUTO_COMPLETE 146 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 147 148 #define CONFIG_SYS_MEMTEST_START 0x70000000 149 #define CONFIG_SYS_MEMTEST_END 0x70010000 150 151 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 152 153 #define CONFIG_CMDLINE_EDITING 154 155 /* Physical Memory Map */ 156 #define CONFIG_NR_DRAM_BANKS 2 157 #define PHYS_SDRAM_1 CSD0_BASE_ADDR 158 #define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size) 159 #define PHYS_SDRAM_2 CSD1_BASE_ADDR 160 #define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size) 161 #define PHYS_SDRAM_SIZE (gd->ram_size) 162 163 #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) 164 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) 165 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) 166 167 #define CONFIG_SYS_INIT_SP_OFFSET \ 168 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 169 #define CONFIG_SYS_INIT_SP_ADDR \ 170 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 171 172 /* environment organization */ 173 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 174 #define CONFIG_ENV_SIZE (8 * 1024) 175 #define CONFIG_SYS_MMC_ENV_DEV 0 176 177 /* Framebuffer and LCD */ 178 #define CONFIG_PREBOOT 179 #define CONFIG_VIDEO_IPUV3 180 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 181 #define CONFIG_VIDEO_BMP_RLE8 182 #define CONFIG_SPLASH_SCREEN 183 #define CONFIG_BMP_16BPP 184 #define CONFIG_VIDEO_LOGO 185 #define CONFIG_IPUV3_CLK 200000000 186 187 #endif /* __CONFIG_H */ 188