1 /* 2 * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com> 3 * 4 * (C) Copyright 2004 5 * Texas Instruments. 6 * Richard Woodruff <r-woodruff2@ti.com> 7 * Kshitij Gupta <kshitij@ti.com> 8 * 9 * Configuration settings for the Freescale i.MX31 PDK board. 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include <asm/arch/imx-regs.h> 18 19 /* High Level Configuration Options */ 20 #define CONFIG_MX31 /* This is a mx31 */ 21 22 #define CONFIG_DISPLAY_CPUINFO 23 #define CONFIG_DISPLAY_BOARDINFO 24 25 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 26 #define CONFIG_SETUP_MEMORY_TAGS 27 #define CONFIG_INITRD_TAG 28 29 #define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS 30 31 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 32 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 33 #define CONFIG_SPL_MAX_SIZE 2048 34 #define CONFIG_SPL_NAND_SUPPORT 35 #define CONFIG_SPL_LIBGENERIC_SUPPORT 36 #define CONFIG_SPL_SERIAL_SUPPORT 37 38 #define CONFIG_SPL_TEXT_BASE 0x87dc0000 39 #define CONFIG_SYS_TEXT_BASE 0x87e00000 40 41 #ifndef CONFIG_SPL_BUILD 42 #define CONFIG_SKIP_LOWLEVEL_INIT 43 #endif 44 45 /* 46 * Size of malloc() pool 47 */ 48 #define CONFIG_SYS_MALLOC_LEN (2*CONFIG_ENV_SIZE + 2 * 128 * 1024) 49 50 /* 51 * Hardware drivers 52 */ 53 54 #define CONFIG_MXC_UART 55 #define CONFIG_MXC_UART_BASE UART1_BASE 56 #define CONFIG_MXC_GPIO 57 58 #define CONFIG_HARD_SPI 59 #define CONFIG_MXC_SPI 60 #define CONFIG_DEFAULT_SPI_BUS 1 61 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) 62 63 /* PMIC Controller */ 64 #define CONFIG_POWER 65 #define CONFIG_POWER_SPI 66 #define CONFIG_POWER_FSL 67 #define CONFIG_FSL_PMIC_BUS 1 68 #define CONFIG_FSL_PMIC_CS 2 69 #define CONFIG_FSL_PMIC_CLK 1000000 70 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) 71 #define CONFIG_FSL_PMIC_BITLEN 32 72 #define CONFIG_RTC_MC13XXX 73 74 /* allow to overwrite serial and ethaddr */ 75 #define CONFIG_ENV_OVERWRITE 76 #define CONFIG_CONS_INDEX 1 77 #define CONFIG_BAUDRATE 115200 78 79 /*********************************************************** 80 * Command definition 81 ***********************************************************/ 82 #define CONFIG_CMD_MII 83 #define CONFIG_CMD_DATE 84 #define CONFIG_CMD_NAND 85 #define CONFIG_CMD_BOOTZ 86 87 #define CONFIG_BOARD_LATE_INIT 88 89 #define CONFIG_BOOTDELAY 1 90 91 #define CONFIG_EXTRA_ENV_SETTINGS \ 92 "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ 93 "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ 94 "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ 95 "bootcmd=run bootcmd_net\0" \ 96 "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ 97 "tftpboot 0x81000000 uImage-mx31; bootm\0" \ 98 "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \ 99 "nand erase 0x0 0x40000; " \ 100 "nand write 0x81000000 0x0 0x40000\0" 101 102 #define CONFIG_SMC911X 103 #define CONFIG_SMC911X_BASE 0xB6000000 104 #define CONFIG_SMC911X_32_BIT 105 106 /* 107 * Miscellaneous configurable options 108 */ 109 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 110 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 111 /* max number of command args */ 112 #define CONFIG_SYS_MAXARGS 16 113 /* Boot Argument Buffer Size */ 114 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 115 116 /* memtest works on */ 117 #define CONFIG_SYS_MEMTEST_START 0x80000000 118 #define CONFIG_SYS_MEMTEST_END 0x80010000 119 120 /* default load address */ 121 #define CONFIG_SYS_LOAD_ADDR 0x81000000 122 123 #define CONFIG_CMDLINE_EDITING 124 125 /*----------------------------------------------------------------------- 126 * Physical Memory Map 127 */ 128 #define CONFIG_NR_DRAM_BANKS 1 129 #define PHYS_SDRAM_1 CSD0_BASE 130 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 131 #define CONFIG_BOARD_EARLY_INIT_F 132 133 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 134 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 135 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 136 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 137 GENERATED_GBL_DATA_SIZE) 138 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 139 CONFIG_SYS_INIT_RAM_SIZE) 140 141 /*----------------------------------------------------------------------- 142 * FLASH and environment organization 143 */ 144 /* No NOR flash present */ 145 #define CONFIG_SYS_NO_FLASH 146 147 #define CONFIG_ENV_IS_IN_NAND 148 #define CONFIG_ENV_OFFSET 0x40000 149 #define CONFIG_ENV_OFFSET_REDUND 0x60000 150 #define CONFIG_ENV_SIZE (128 * 1024) 151 152 /* 153 * NAND driver 154 */ 155 #define CONFIG_NAND_MXC 156 #define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR 157 #define CONFIG_SYS_MAX_NAND_DEVICE 1 158 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 159 #define CONFIG_MXC_NAND_HWECC 160 #define CONFIG_SYS_NAND_LARGEPAGE 161 162 /* NAND configuration for the NAND_SPL */ 163 164 /* Start copying real U-Boot from the second page */ 165 #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO 166 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800 167 /* Load U-Boot to this address */ 168 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 169 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST 170 171 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 172 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 173 #define CONFIG_SYS_NAND_PAGE_COUNT 64 174 #define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) 175 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 176 177 /* Configuration of lowlevel_init.S (clocks and SDRAM) */ 178 #define CCM_CCMR_SETUP 0x074B0BF5 179 #define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \ 180 PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | \ 181 PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | \ 182 PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0)) 183 #define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \ 184 PLL_MFN(12)) 185 186 #define ESDMISC_MDDR_SETUP 0x00000004 187 #define ESDMISC_MDDR_RESET_DL 0x0000000c 188 #define ESDCFG0_MDDR_SETUP 0x006ac73a 189 190 #define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2)) 191 #define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \ 192 ESDCTL_DSIZ(2) | ESDCTL_BL(1)) 193 #define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE) 194 #define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH) 195 #define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG) 196 #define ESDCTL_RW ESDCTL_SETTINGS 197 198 #endif /* __CONFIG_H */ 199