1 /* 2 * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de> 3 * 4 * Configuration settings for the MX31ADS Freescale board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include <asm/arch/imx-regs.h> 13 14 /* High Level Configuration Options */ 15 #define CONFIG_MX31 1 /* This is a mx31 */ 16 17 #define CONFIG_DISPLAY_CPUINFO 18 #define CONFIG_DISPLAY_BOARDINFO 19 20 #define CONFIG_SYS_TEXT_BASE 0xA0000000 21 22 #define CONFIG_MACH_TYPE MACH_TYPE_MX31ADS 23 24 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 25 #define CONFIG_SETUP_MEMORY_TAGS 1 26 #define CONFIG_INITRD_TAG 1 27 28 /* 29 * Size of malloc() pool 30 */ 31 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) 32 33 /* 34 * Hardware drivers 35 */ 36 37 #define CONFIG_MXC_UART 38 #define CONFIG_MXC_UART_BASE UART1_BASE 39 40 #define CONFIG_HARD_SPI 1 41 #define CONFIG_MXC_SPI 1 42 #define CONFIG_DEFAULT_SPI_BUS 1 43 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) 44 #define CONFIG_MXC_GPIO 45 46 /* PMIC Controller */ 47 #define CONFIG_POWER 48 #define CONFIG_POWER_SPI 49 #define CONFIG_POWER_FSL 50 #define CONFIG_FSL_PMIC_BUS 1 51 #define CONFIG_FSL_PMIC_CS 0 52 #define CONFIG_FSL_PMIC_CLK 1000000 53 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) 54 #define CONFIG_FSL_PMIC_BITLEN 32 55 #define CONFIG_RTC_MC13XXX 56 57 /* allow to overwrite serial and ethaddr */ 58 #define CONFIG_ENV_OVERWRITE 59 #define CONFIG_CONS_INDEX 1 60 #define CONFIG_BAUDRATE 115200 61 62 /*********************************************************** 63 * Command definition 64 ***********************************************************/ 65 #define CONFIG_CMD_DATE 66 67 68 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ 69 70 #define CONFIG_EXTRA_ENV_SETTINGS \ 71 "netdev=eth0\0" \ 72 "uboot_addr=0xa0000000\0" \ 73 "uboot=mx31ads/u-boot.bin\0" \ 74 "kernel=mx31ads/uImage\0" \ 75 "nfsroot=/opt/eldk/arm\0" \ 76 "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ 77 "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \ 78 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 79 "bootcmd=run bootcmd_net\0" \ 80 "bootcmd_net=run bootargs_base bootargs_nfs; " \ 81 "tftpboot ${loadaddr} ${kernel}; bootm\0" \ 82 "prg_uboot=tftpboot ${loadaddr} ${uboot}; " \ 83 "protect off ${uboot_addr} 0xa003ffff; " \ 84 "erase ${uboot_addr} 0xa003ffff; " \ 85 "cp.b ${loadaddr} ${uboot_addr} ${filesize}; " \ 86 "setenv filesize; saveenv\0" 87 88 #define CONFIG_CS8900 89 #define CONFIG_CS8900_BASE 0xb4020300 90 #define CONFIG_CS8900_BUS16 1 /* follow the Linux driver */ 91 92 /* 93 * The MX31ADS board seems to have a hardware "peculiarity" confirmed under 94 * U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A 95 * controller inverted. The controller is capable of detecting and correcting 96 * this, but it needs 4 network packets for that. Which means, at startup, you 97 * will not receive answers to the first 4 packest, unless there have been some 98 * broadcasts on the network, or your board is on a hub. Reducing the ARP 99 * timeout from default 5 seconds to 200ms we speed up the initial TFTP 100 * transfer, should the user wish one, significantly. 101 */ 102 #define CONFIG_ARP_TIMEOUT 200UL 103 104 /* 105 * Miscellaneous configurable options 106 */ 107 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 108 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 109 /* Print Buffer Size */ 110 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 111 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 112 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 113 114 #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ 115 #define CONFIG_SYS_MEMTEST_END 0x10000 116 117 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 118 119 #define CONFIG_CMDLINE_EDITING 1 120 121 /*----------------------------------------------------------------------- 122 * Physical Memory Map 123 */ 124 #define CONFIG_NR_DRAM_BANKS 1 125 #define PHYS_SDRAM_1 CSD0_BASE 126 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 127 #define CONFIG_BOARD_EARLY_INIT_F 128 129 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 130 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 131 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 132 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 133 GENERATED_GBL_DATA_SIZE) 134 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 135 CONFIG_SYS_GBL_DATA_OFFSET) 136 137 /*----------------------------------------------------------------------- 138 * FLASH and environment organization 139 */ 140 #define CONFIG_SYS_FLASH_BASE CS0_BASE 141 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 142 #define CONFIG_SYS_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ 143 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ 144 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */ 145 146 #define CONFIG_ENV_IS_IN_FLASH 1 147 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 148 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 149 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 150 151 /* Address and size of Redundant Environment Sector */ 152 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) 153 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 154 155 /*----------------------------------------------------------------------- 156 * CFI FLASH driver setup 157 */ 158 #define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ 159 #define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ 160 #define CONFIG_FLASH_SPANSION_S29WS_N 1 /* A non-standard buffered write algorithm */ 161 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ 162 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ 163 164 /* 165 * JFFS2 partitions 166 */ 167 #undef CONFIG_CMD_MTDPARTS 168 #define CONFIG_JFFS2_DEV "nor0" 169 170 #endif /* __CONFIG_H */ 171