1 /* 2 * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de> 3 * 4 * Configuration settings for the MX31ADS Freescale board. 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation; either version 2 of 9 * the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 19 * MA 02111-1307 USA 20 */ 21 22 #ifndef __CONFIG_H 23 #define __CONFIG_H 24 25 #include <asm/arch/mx31-regs.h> 26 27 /* High Level Configuration Options */ 28 #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ 29 #define CONFIG_MX31 1 /* in a mx31 */ 30 #define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */ 31 #define CONFIG_MX31_CLK32 32768 32 33 #define CONFIG_DISPLAY_CPUINFO 34 #define CONFIG_DISPLAY_BOARDINFO 35 36 /* 37 * Disabled for now due to build problems under Debian and a significant increase 38 * in the final file size: 144260 vs. 109536 Bytes. 39 */ 40 #if 0 41 #define CONFIG_OF_LIBFDT 1 42 #define CONFIG_FIT 1 43 #define CONFIG_FIT_VERBOSE 1 44 #endif 45 46 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 47 #define CONFIG_SETUP_MEMORY_TAGS 1 48 #define CONFIG_INITRD_TAG 1 49 50 /* 51 * Size of malloc() pool 52 */ 53 #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) 54 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 55 56 /* 57 * Hardware drivers 58 */ 59 60 #define CONFIG_MX31_UART 1 61 #define CFG_MX31_UART1 1 62 63 #define CONFIG_HARD_SPI 1 64 #define CONFIG_MXC_SPI 1 65 #define CONFIG_DEFAULT_SPI_BUS 1 66 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) 67 68 #define CONFIG_RTC_MC13783 1 69 70 /* allow to overwrite serial and ethaddr */ 71 #define CONFIG_ENV_OVERWRITE 72 #define CONFIG_CONS_INDEX 1 73 #define CONFIG_BAUDRATE 115200 74 #define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} 75 76 /*********************************************************** 77 * Command definition 78 ***********************************************************/ 79 80 #include <config_cmd_default.h> 81 82 #define CONFIG_CMD_PING 83 #define CONFIG_CMD_DHCP 84 #define CONFIG_CMD_SPI 85 #define CONFIG_CMD_DATE 86 87 #define CONFIG_BOOTDELAY 3 88 89 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ 90 91 #define CONFIG_EXTRA_ENV_SETTINGS \ 92 "netdev=eth0\0" \ 93 "uboot_addr=0xa0000000\0" \ 94 "uboot=mx31ads/u-boot.bin\0" \ 95 "kernel=mx31ads/uImage\0" \ 96 "nfsroot=/opt/eldk/arm\0" \ 97 "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ 98 "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \ 99 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 100 "bootcmd=run bootcmd_net\0" \ 101 "bootcmd_net=run bootargs_base bootargs_nfs; " \ 102 "tftpboot ${loadaddr} ${kernel}; bootm\0" \ 103 "prg_uboot=tftpboot ${loadaddr} ${uboot}; " \ 104 "protect off ${uboot_addr} 0xa003ffff; " \ 105 "erase ${uboot_addr} 0xa003ffff; " \ 106 "cp.b ${loadaddr} ${uboot_addr} ${filesize}; " \ 107 "setenv filesize; saveenv\0" 108 109 #define CONFIG_DRIVER_CS8900 1 110 #define CS8900_BASE 0xb4020300 111 #define CS8900_BUS16 1 /* follow the Linux driver */ 112 113 /* 114 * The MX31ADS board seems to have a hardware "peculiarity" confirmed under 115 * U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A 116 * controller inverted. The controller is capable of detecting and correcting 117 * this, but it needs 4 network packets for that. Which means, at startup, you 118 * will not receive answers to the first 4 packest, unless there have been some 119 * broadcasts on the network, or your board is on a hub. Reducing the ARP 120 * timeout from default 5 seconds to 200ms we speed up the initial TFTP 121 * transfer, should the user wish one, significantly. 122 */ 123 #define CONFIG_ARP_TIMEOUT 200UL 124 125 /* 126 * Miscellaneous configurable options 127 */ 128 #define CFG_LONGHELP /* undef to save memory */ 129 #define CFG_PROMPT "=> " 130 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 131 /* Print Buffer Size */ 132 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) 133 #define CFG_MAXARGS 16 /* max number of command args */ 134 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 135 136 #define CFG_MEMTEST_START 0 /* memtest works on */ 137 #define CFG_MEMTEST_END 0x10000 138 139 #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ 140 141 #define CFG_LOAD_ADDR CONFIG_LOADADDR 142 143 #define CFG_HZ CONFIG_MX31_CLK32 /* use 32kHz clock as source */ 144 145 #define CONFIG_CMDLINE_EDITING 1 146 147 /*----------------------------------------------------------------------- 148 * Stack sizes 149 * 150 * The stack sizes are set up in start.S using the settings below 151 */ 152 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 153 154 /*----------------------------------------------------------------------- 155 * Physical Memory Map 156 */ 157 #define CONFIG_NR_DRAM_BANKS 1 158 #define PHYS_SDRAM_1 CSD0_BASE 159 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 160 161 /*----------------------------------------------------------------------- 162 * FLASH and environment organization 163 */ 164 #define CFG_FLASH_BASE CS0_BASE 165 #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ 166 #define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ 167 #define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ 168 #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */ 169 170 #define CFG_ENV_IS_IN_FLASH 1 171 #define CFG_ENV_SECT_SIZE (32 * 1024) 172 #define CFG_ENV_SIZE CFG_ENV_SECT_SIZE 173 174 /* Address and size of Redundant Environment Sector */ 175 #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) 176 #define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE 177 178 /* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end. 179 * The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors, 180 * if we put environment next to it, we will have to occupy 128KiB for it. 181 * Putting it at the top of flash we use only 32KiB. */ 182 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE) 183 184 /*----------------------------------------------------------------------- 185 * CFI FLASH driver setup 186 */ 187 #define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ 188 #define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ 189 #define CONFIG_FLASH_SPANSION_S29WS_N 1 /* A non-standard buffered write algorithm */ 190 #define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ 191 #define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ 192 193 /* 194 * JFFS2 partitions 195 */ 196 #undef CONFIG_JFFS2_CMDLINE 197 #define CONFIG_JFFS2_DEV "nor0" 198 199 #endif /* __CONFIG_H */ 200