1 /* 2 * Copyright (C) 2015 Freescale Semiconductor 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1043A_COMMON_H 8 #define __LS1043A_COMMON_H 9 10 #define CONFIG_REMAKE_ELF 11 #define CONFIG_FSL_LAYERSCAPE 12 #define CONFIG_FSL_LSCH2 13 #define CONFIG_LS1043A 14 #define CONFIG_MP 15 #define CONFIG_SYS_FSL_CLK 16 #define CONFIG_GICV2 17 18 #include <asm/arch/config.h> 19 #ifdef CONFIG_SYS_FSL_SRDS_1 20 #define CONFIG_SYS_HAS_SERDES 21 #endif 22 23 /* Link Definitions */ 24 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) 25 26 #define CONFIG_SUPPORT_RAW_INITRD 27 28 #define CONFIG_SKIP_LOWLEVEL_INIT 29 #define CONFIG_BOARD_EARLY_INIT_F 1 30 31 #ifndef CONFIG_SYS_FSL_DDR4 32 #define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ 33 #endif 34 35 #define CONFIG_VERY_BIG_RAM 36 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 37 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 38 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 39 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL 40 41 #define CPU_RELEASE_ADDR secondary_boot_func 42 43 /* Generic Timer Definitions */ 44 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 45 46 /* Size of malloc() pool */ 47 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 48 49 /* Serial Port */ 50 #define CONFIG_CONS_INDEX 1 51 #define CONFIG_SYS_NS16550_SERIAL 52 #define CONFIG_SYS_NS16550_REG_SIZE 1 53 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) 54 55 #define CONFIG_BAUDRATE 115200 56 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 57 58 /* SD boot SPL */ 59 #ifdef CONFIG_SD_BOOT 60 #define CONFIG_SPL_FRAMEWORK 61 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 62 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 63 #define CONFIG_SPL_WATCHDOG_SUPPORT 64 #define CONFIG_SPL_SERIAL_SUPPORT 65 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0 66 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 67 68 #define CONFIG_SPL_TEXT_BASE 0x10000000 69 #define CONFIG_SPL_MAX_SIZE 0x1d000 70 #define CONFIG_SPL_STACK 0x1001e000 71 #define CONFIG_SPL_PAD_TO 0x1d000 72 73 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 74 CONFIG_SYS_MONITOR_LEN) 75 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 76 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 77 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 78 #define CONFIG_SYS_MONITOR_LEN 0xa0000 79 #endif 80 81 /* NAND SPL */ 82 #ifdef CONFIG_NAND_BOOT 83 #define CONFIG_SPL_PBL_PAD 84 #define CONFIG_SPL_FRAMEWORK 85 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 86 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 87 #define CONFIG_SPL_WATCHDOG_SUPPORT 88 #define CONFIG_SPL_SERIAL_SUPPORT 89 #define CONFIG_SPL_NAND_SUPPORT 90 #define CONFIG_SPL_TEXT_BASE 0x10000000 91 #define CONFIG_SPL_MAX_SIZE 0x1a000 92 #define CONFIG_SPL_STACK 0x1001d000 93 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 94 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 95 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 96 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 97 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 98 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 99 #define CONFIG_SYS_MONITOR_LEN 0xa0000 100 #endif 101 102 /* IFC */ 103 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 104 #define CONFIG_FSL_IFC 105 /* 106 * CONFIG_SYS_FLASH_BASE has the final address (core view) 107 * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) 108 * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address 109 * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting 110 */ 111 #define CONFIG_SYS_FLASH_BASE 0x60000000 112 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 113 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 114 115 #ifndef CONFIG_SYS_NO_FLASH 116 #define CONFIG_FLASH_CFI_DRIVER 117 #define CONFIG_SYS_FLASH_CFI 118 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 119 #define CONFIG_SYS_FLASH_QUIET_TEST 120 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 121 #endif 122 #endif 123 124 /* I2C */ 125 #define CONFIG_SYS_I2C 126 #define CONFIG_SYS_I2C_MXC 127 #define CONFIG_SYS_I2C_MXC_I2C1 128 #define CONFIG_SYS_I2C_MXC_I2C2 129 #define CONFIG_SYS_I2C_MXC_I2C3 130 #define CONFIG_SYS_I2C_MXC_I2C4 131 132 /* PCIe */ 133 #define CONFIG_PCI /* Enable PCI/PCIE */ 134 #define CONFIG_PCIE1 /* PCIE controller 1 */ 135 #define CONFIG_PCIE2 /* PCIE controller 2 */ 136 #define CONFIG_PCIE3 /* PCIE controller 3 */ 137 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ 138 #define FSL_PCIE_COMPAT "fsl,ls1043a-pcie" 139 140 #define CONFIG_SYS_PCI_64BIT 141 142 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 143 #define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ 144 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 145 #define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ 146 147 #define CONFIG_SYS_PCIE_IO_BUS 0x00000000 148 #define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 149 #define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ 150 151 #define CONFIG_SYS_PCIE_MEM_BUS 0x40000000 152 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x40000000 153 #define CONFIG_SYS_PCIE_MEM_SIZE 0x40000000 /* 1G */ 154 155 #ifdef CONFIG_PCI 156 #define CONFIG_NET_MULTI 157 #define CONFIG_PCI_PNP 158 #define CONFIG_E1000 159 #define CONFIG_PCI_SCAN_SHOW 160 #define CONFIG_CMD_PCI 161 #endif 162 163 /* Command line configuration */ 164 #define CONFIG_CMD_ENV 165 #define CONFIG_MENU 166 #define CONFIG_CMD_PXE 167 168 /* MMC */ 169 #define CONFIG_MMC 170 #ifdef CONFIG_MMC 171 #define CONFIG_FSL_ESDHC 172 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 173 #define CONFIG_GENERIC_MMC 174 #define CONFIG_DOS_PARTITION 175 #endif 176 177 /* DSPI */ 178 #define CONFIG_FSL_DSPI 179 #ifdef CONFIG_FSL_DSPI 180 #define CONFIG_DM_SPI_FLASH 181 #define CONFIG_SPI_FLASH_STMICRO /* cs0 */ 182 #define CONFIG_SPI_FLASH_SST /* cs1 */ 183 #define CONFIG_SPI_FLASH_EON /* cs2 */ 184 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 185 #define CONFIG_SF_DEFAULT_BUS 1 186 #define CONFIG_SF_DEFAULT_CS 0 187 #endif 188 #endif 189 190 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 191 192 /* FMan ucode */ 193 #define CONFIG_SYS_DPAA_FMAN 194 #ifdef CONFIG_SYS_DPAA_FMAN 195 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 196 197 #ifdef CONFIG_NAND_BOOT 198 /* Store Fman ucode at offeset 0x160000(11 blocks). */ 199 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 200 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 201 #elif defined(CONFIG_SD_BOOT) 202 /* 203 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 204 * about 1MB (2040 blocks), Env is stored after the image, and the env size is 205 * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 2080(0x820). 206 */ 207 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 208 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 209 #elif defined(CONFIG_QSPI_BOOT) 210 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 211 #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 212 #define CONFIG_ENV_SPI_BUS 0 213 #define CONFIG_ENV_SPI_CS 0 214 #define CONFIG_ENV_SPI_MAX_HZ 1000000 215 #define CONFIG_ENV_SPI_MODE 0x03 216 #else 217 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 218 /* FMan fireware Pre-load address */ 219 #define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 220 #endif 221 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 222 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 223 #endif 224 225 /* Miscellaneous configurable options */ 226 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) 227 #define CONFIG_ARCH_EARLY_INIT_R 228 #define CONFIG_BOARD_LATE_INIT 229 230 #define CONFIG_HWCONFIG 231 #define HWCONFIG_BUFFER_SIZE 128 232 233 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 234 #define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \ 235 "5m(kernel),1m(dtb),9m(file_system)" 236 #else 237 #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \ 238 "1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \ 239 "1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \ 240 "1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \ 241 "1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \ 242 "40m(nor_bank4_fit);7e800000.flash:" \ 243 "1m(nand_uboot),1m(nand_uboot_env)," \ 244 "20m(nand_fit);spi0.0:1m(uboot)," \ 245 "5m(kernel),1m(dtb),9m(file_system)" 246 #endif 247 248 /* Initial environment variables */ 249 #define CONFIG_EXTRA_ENV_SETTINGS \ 250 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 251 "loadaddr=0x80100000\0" \ 252 "fdt_high=0xffffffffffffffff\0" \ 253 "initrd_high=0xffffffffffffffff\0" \ 254 "kernel_start=0x61100000\0" \ 255 "kernel_load=0xa0000000\0" \ 256 "kernel_size=0x2800000\0" \ 257 "console=ttyS0,115200\0" \ 258 "mtdparts=" MTDPARTS_DEFAULT "\0" 259 260 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ 261 "earlycon=uart8250,mmio,0x21c0500 " \ 262 MTDPARTS_DEFAULT 263 264 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 265 #define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \ 266 "e0000 f00000 && bootm $kernel_load" 267 #else 268 #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ 269 "$kernel_size && bootm $kernel_load" 270 #endif 271 272 /* Monitor Command Prompt */ 273 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 274 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 275 sizeof(CONFIG_SYS_PROMPT) + 16) 276 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ 277 #define CONFIG_SYS_LONGHELP 278 #define CONFIG_CMDLINE_EDITING 1 279 #define CONFIG_AUTO_COMPLETE 280 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 281 282 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 283 284 /* Hash command with SHA acceleration supported in hardware */ 285 #ifdef CONFIG_FSL_CAAM 286 #define CONFIG_CMD_HASH 287 #define CONFIG_SHA_HW_ACCEL 288 #endif 289 290 #endif /* __LS1043A_COMMON_H */ 291