1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_LS102XA 11 12 #define CONFIG_ARMV7_PSCI_1_0 13 14 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR 15 16 #define CONFIG_SYS_FSL_CLK 17 18 #define CONFIG_DISPLAY_CPUINFO 19 #define CONFIG_DISPLAY_BOARDINFO 20 21 #define CONFIG_SKIP_LOWLEVEL_INIT 22 #define CONFIG_BOARD_EARLY_INIT_F 23 #define CONFIG_DEEP_SLEEP 24 #ifdef CONFIG_DEEP_SLEEP 25 #define CONFIG_SILENT_CONSOLE 26 #endif 27 28 /* 29 * Size of malloc() pool 30 */ 31 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 32 33 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 34 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 35 36 /* 37 * USB 38 */ 39 40 /* 41 * EHCI Support - disbaled by default as 42 * there is no signal coming out of soc on 43 * this board for this controller. However, 44 * the silicon still has this controller, 45 * and anyone can use this controller by 46 * taking signals out on their board. 47 */ 48 49 /*#define CONFIG_HAS_FSL_DR_USB*/ 50 51 #ifdef CONFIG_HAS_FSL_DR_USB 52 #define CONFIG_USB_EHCI 53 #define CONFIG_USB_EHCI_FSL 54 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 55 #endif 56 57 /* XHCI Support - enabled by default */ 58 #define CONFIG_HAS_FSL_XHCI_USB 59 60 #ifdef CONFIG_HAS_FSL_XHCI_USB 61 #define CONFIG_USB_XHCI_FSL 62 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 63 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 64 #endif 65 66 /* 67 * Generic Timer Definitions 68 */ 69 #define GENERIC_TIMER_CLK 12500000 70 71 #define CONFIG_SYS_CLK_FREQ 100000000 72 #define CONFIG_DDR_CLK_FREQ 100000000 73 74 #define DDR_SDRAM_CFG 0x470c0008 75 #define DDR_CS0_BNDS 0x008000bf 76 #define DDR_CS0_CONFIG 0x80014302 77 #define DDR_TIMING_CFG_0 0x50550004 78 #define DDR_TIMING_CFG_1 0xbcb38c56 79 #define DDR_TIMING_CFG_2 0x0040d120 80 #define DDR_TIMING_CFG_3 0x010e1000 81 #define DDR_TIMING_CFG_4 0x00000001 82 #define DDR_TIMING_CFG_5 0x03401400 83 #define DDR_SDRAM_CFG_2 0x00401010 84 #define DDR_SDRAM_MODE 0x00061c60 85 #define DDR_SDRAM_MODE_2 0x00180000 86 #define DDR_SDRAM_INTERVAL 0x18600618 87 #define DDR_DDR_WRLVL_CNTL 0x8655f605 88 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 89 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 90 #define DDR_DDR_CDR1 0x80040000 91 #define DDR_DDR_CDR2 0x00000001 92 #define DDR_SDRAM_CLK_CNTL 0x02000000 93 #define DDR_DDR_ZQ_CNTL 0x89080600 94 #define DDR_CS0_CONFIG_2 0 95 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 96 #define SDRAM_CFG2_D_INIT 0x00000010 97 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 98 #define SDRAM_CFG2_FRC_SR 0x80000000 99 #define SDRAM_CFG_BI 0x00000001 100 101 #ifdef CONFIG_RAMBOOT_PBL 102 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg 103 #endif 104 105 #ifdef CONFIG_SD_BOOT 106 #ifdef CONFIG_SD_BOOT_QSPI 107 #define CONFIG_SYS_FSL_PBL_RCW \ 108 board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg 109 #else 110 #define CONFIG_SYS_FSL_PBL_RCW \ 111 board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg 112 #endif 113 #define CONFIG_SPL_FRAMEWORK 114 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 115 #define CONFIG_SPL_LIBCOMMON_SUPPORT 116 #define CONFIG_SPL_LIBGENERIC_SUPPORT 117 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 118 #define CONFIG_SPL_WATCHDOG_SUPPORT 119 #define CONFIG_SPL_SERIAL_SUPPORT 120 #define CONFIG_SPL_MMC_SUPPORT 121 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 122 123 #ifdef CONFIG_SECURE_BOOT 124 #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) 125 /* 126 * HDR would be appended at end of image and copied to DDR along 127 * with U-Boot image. 128 */ 129 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (0x400 + \ 130 (CONFIG_U_BOOT_HDR_SIZE / 512) 131 #else 132 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 133 #endif /* ifdef CONFIG_SECURE_BOOT */ 134 135 #define CONFIG_SPL_TEXT_BASE 0x10000000 136 #define CONFIG_SPL_MAX_SIZE 0x1a000 137 #define CONFIG_SPL_STACK 0x1001d000 138 #define CONFIG_SPL_PAD_TO 0x1c000 139 #define CONFIG_SYS_TEXT_BASE 0x82000000 140 141 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 142 CONFIG_SYS_MONITOR_LEN) 143 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 144 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 145 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 146 147 #ifdef CONFIG_U_BOOT_HDR_SIZE 148 /* 149 * HDR would be appended at end of image and copied to DDR along 150 * with U-Boot image. Here u-boot max. size is 512K. So if binary 151 * size increases then increase this size in case of secure boot as 152 * it uses raw u-boot image instead of fit image. 153 */ 154 #define CONFIG_SYS_MONITOR_LEN (0x80000 + CONFIG_U_BOOT_HDR_SIZE) 155 #else 156 #define CONFIG_SYS_MONITOR_LEN 0x80000 157 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ 158 #endif 159 160 #ifdef CONFIG_QSPI_BOOT 161 #define CONFIG_SYS_TEXT_BASE 0x40010000 162 #endif 163 164 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 165 #define CONFIG_SYS_NO_FLASH 166 #endif 167 168 #ifndef CONFIG_SYS_TEXT_BASE 169 #define CONFIG_SYS_TEXT_BASE 0x60100000 170 #endif 171 172 #define CONFIG_NR_DRAM_BANKS 1 173 #define PHYS_SDRAM 0x80000000 174 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 175 176 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 177 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 178 179 #define CONFIG_SYS_HAS_SERDES 180 181 #define CONFIG_FSL_CAAM /* Enable CAAM */ 182 183 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ 184 !defined(CONFIG_QSPI_BOOT) 185 #define CONFIG_U_QE 186 #endif 187 188 /* 189 * IFC Definitions 190 */ 191 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 192 #define CONFIG_FSL_IFC 193 #define CONFIG_SYS_FLASH_BASE 0x60000000 194 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 195 196 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) 197 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 198 CSPR_PORT_SIZE_16 | \ 199 CSPR_MSEL_NOR | \ 200 CSPR_V) 201 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) 202 203 /* NOR Flash Timing Params */ 204 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 205 CSOR_NOR_TRHZ_80) 206 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 207 FTIM0_NOR_TEADC(0x5) | \ 208 FTIM0_NOR_TAVDS(0x0) | \ 209 FTIM0_NOR_TEAHC(0x5)) 210 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 211 FTIM1_NOR_TRAD_NOR(0x1A) | \ 212 FTIM1_NOR_TSEQRAD_NOR(0x13)) 213 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 214 FTIM2_NOR_TCH(0x4) | \ 215 FTIM2_NOR_TWP(0x1c) | \ 216 FTIM2_NOR_TWPH(0x0e)) 217 #define CONFIG_SYS_NOR_FTIM3 0 218 219 #define CONFIG_FLASH_CFI_DRIVER 220 #define CONFIG_SYS_FLASH_CFI 221 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 222 #define CONFIG_SYS_FLASH_QUIET_TEST 223 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 224 225 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 226 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 227 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 228 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 229 230 #define CONFIG_SYS_FLASH_EMPTY_INFO 231 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } 232 233 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 234 #define CONFIG_SYS_WRITE_SWAPPED_DATA 235 #endif 236 237 /* CPLD */ 238 239 #define CONFIG_SYS_CPLD_BASE 0x7fb00000 240 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 241 242 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) 243 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ 244 CSPR_PORT_SIZE_8 | \ 245 CSPR_MSEL_GPCM | \ 246 CSPR_V) 247 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) 248 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 249 CSOR_NOR_NOR_MODE_AVD_NOR | \ 250 CSOR_NOR_TRHZ_80) 251 252 /* CPLD Timing parameters for IFC GPCM */ 253 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ 254 FTIM0_GPCM_TEADC(0xf) | \ 255 FTIM0_GPCM_TEAHC(0xf)) 256 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 257 FTIM1_GPCM_TRAD(0x3f)) 258 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ 259 FTIM2_GPCM_TCH(0xf) | \ 260 FTIM2_GPCM_TWP(0xff)) 261 #define CONFIG_SYS_FPGA_FTIM3 0x0 262 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 263 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 264 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 265 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 266 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 267 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 268 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 269 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 270 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT 271 #define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR 272 #define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK 273 #define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR 274 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0 275 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1 276 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2 277 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3 278 279 /* 280 * Serial Port 281 */ 282 #ifdef CONFIG_LPUART 283 #define CONFIG_LPUART_32B_REG 284 #else 285 #define CONFIG_CONS_INDEX 1 286 #define CONFIG_SYS_NS16550_SERIAL 287 #ifndef CONFIG_DM_SERIAL 288 #define CONFIG_SYS_NS16550_REG_SIZE 1 289 #endif 290 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 291 #endif 292 293 #define CONFIG_BAUDRATE 115200 294 295 /* 296 * I2C 297 */ 298 #define CONFIG_SYS_I2C 299 #define CONFIG_SYS_I2C_MXC 300 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 301 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 302 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 303 304 /* EEPROM */ 305 #define CONFIG_ID_EEPROM 306 #define CONFIG_SYS_I2C_EEPROM_NXID 307 #define CONFIG_SYS_EEPROM_BUS_NUM 1 308 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 309 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 310 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 311 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 312 313 /* 314 * MMC 315 */ 316 #define CONFIG_MMC 317 #define CONFIG_FSL_ESDHC 318 #define CONFIG_GENERIC_MMC 319 320 #define CONFIG_DOS_PARTITION 321 322 /* SPI */ 323 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 324 /* QSPI */ 325 #define QSPI0_AMBA_BASE 0x40000000 326 #define FSL_QSPI_FLASH_SIZE (1 << 24) 327 #define FSL_QSPI_FLASH_NUM 2 328 329 /* DSPI */ 330 #endif 331 332 /* DM SPI */ 333 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 334 #define CONFIG_DM_SPI_FLASH 335 #endif 336 337 /* 338 * Video 339 */ 340 #define CONFIG_FSL_DCU_FB 341 342 #ifdef CONFIG_FSL_DCU_FB 343 #define CONFIG_VIDEO 344 #define CONFIG_CMD_BMP 345 #define CONFIG_CFB_CONSOLE 346 #define CONFIG_VGA_AS_SINGLE_DEVICE 347 #define CONFIG_VIDEO_LOGO 348 #define CONFIG_VIDEO_BMP_LOGO 349 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 350 351 #define CONFIG_FSL_DCU_SII9022A 352 #define CONFIG_SYS_I2C_DVI_BUS_NUM 1 353 #define CONFIG_SYS_I2C_DVI_ADDR 0x39 354 #endif 355 356 /* 357 * eTSEC 358 */ 359 #define CONFIG_TSEC_ENET 360 361 #ifdef CONFIG_TSEC_ENET 362 #define CONFIG_MII 363 #define CONFIG_MII_DEFAULT_TSEC 1 364 #define CONFIG_TSEC1 1 365 #define CONFIG_TSEC1_NAME "eTSEC1" 366 #define CONFIG_TSEC2 1 367 #define CONFIG_TSEC2_NAME "eTSEC2" 368 #define CONFIG_TSEC3 1 369 #define CONFIG_TSEC3_NAME "eTSEC3" 370 371 #define TSEC1_PHY_ADDR 2 372 #define TSEC2_PHY_ADDR 0 373 #define TSEC3_PHY_ADDR 1 374 375 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 376 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 377 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 378 379 #define TSEC1_PHYIDX 0 380 #define TSEC2_PHYIDX 0 381 #define TSEC3_PHYIDX 0 382 383 #define CONFIG_ETHPRIME "eTSEC1" 384 385 #define CONFIG_PHY_GIGE 386 #define CONFIG_PHYLIB 387 #define CONFIG_PHY_ATHEROS 388 389 #define CONFIG_HAS_ETH0 390 #define CONFIG_HAS_ETH1 391 #define CONFIG_HAS_ETH2 392 #endif 393 394 /* PCIe */ 395 #define CONFIG_PCI /* Enable PCI/PCIE */ 396 #define CONFIG_PCIE1 /* PCIE controller 1 */ 397 #define CONFIG_PCIE2 /* PCIE controller 2 */ 398 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ 399 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 400 401 #define CONFIG_SYS_PCI_64BIT 402 403 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 404 #define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ 405 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 406 #define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ 407 408 #define CONFIG_SYS_PCIE_IO_BUS 0x00000000 409 #define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 410 #define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ 411 412 #define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 413 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 414 #define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ 415 416 #ifdef CONFIG_PCI 417 #define CONFIG_PCI_PNP 418 #define CONFIG_PCI_SCAN_SHOW 419 #define CONFIG_CMD_PCI 420 #endif 421 422 #define CONFIG_CMDLINE_TAG 423 #define CONFIG_CMDLINE_EDITING 424 425 #define CONFIG_ARMV7_NONSEC 426 #define CONFIG_ARMV7_VIRT 427 #define CONFIG_PEN_ADDR_BIG_ENDIAN 428 #define CONFIG_LAYERSCAPE_NS_ACCESS 429 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 430 #define CONFIG_TIMER_CLK_FREQ 12500000 431 432 #define CONFIG_HWCONFIG 433 #define HWCONFIG_BUFFER_SIZE 256 434 435 #define CONFIG_FSL_DEVICE_DISABLE 436 437 438 #ifdef CONFIG_LPUART 439 #define CONFIG_EXTRA_ENV_SETTINGS \ 440 "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ 441 "initrd_high=0xffffffff\0" \ 442 "fdt_high=0xffffffff\0" 443 #else 444 #define CONFIG_EXTRA_ENV_SETTINGS \ 445 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 446 "initrd_high=0xffffffff\0" \ 447 "fdt_high=0xffffffff\0" 448 #endif 449 450 /* 451 * Miscellaneous configurable options 452 */ 453 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 454 #define CONFIG_AUTO_COMPLETE 455 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 456 #define CONFIG_SYS_PBSIZE \ 457 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 458 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 459 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 460 461 #define CONFIG_SYS_MEMTEST_START 0x80000000 462 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 463 464 #define CONFIG_SYS_LOAD_ADDR 0x82000000 465 466 #define CONFIG_LS102XA_STREAM_ID 467 468 /* 469 * Stack sizes 470 * The stack sizes are set up in start.S using the settings below 471 */ 472 #define CONFIG_STACKSIZE (30 * 1024) 473 474 #define CONFIG_SYS_INIT_SP_OFFSET \ 475 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 476 #define CONFIG_SYS_INIT_SP_ADDR \ 477 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 478 479 #ifdef CONFIG_SPL_BUILD 480 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 481 #else 482 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 483 #endif 484 485 #define CONFIG_SYS_QE_FW_ADDR 0x600c0000 486 487 /* 488 * Environment 489 */ 490 #define CONFIG_ENV_OVERWRITE 491 492 #if defined(CONFIG_SD_BOOT) 493 #define CONFIG_ENV_OFFSET 0x100000 494 #define CONFIG_ENV_IS_IN_MMC 495 #define CONFIG_SYS_MMC_ENV_DEV 0 496 #define CONFIG_ENV_SIZE 0x20000 497 #elif defined(CONFIG_QSPI_BOOT) 498 #define CONFIG_ENV_IS_IN_SPI_FLASH 499 #define CONFIG_ENV_SIZE 0x2000 500 #define CONFIG_ENV_OFFSET 0x100000 501 #define CONFIG_ENV_SECT_SIZE 0x10000 502 #else 503 #define CONFIG_ENV_IS_IN_FLASH 504 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 505 #define CONFIG_ENV_SIZE 0x20000 506 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 507 #endif 508 509 #define CONFIG_MISC_INIT_R 510 511 /* Hash command with SHA acceleration supported in hardware */ 512 #ifdef CONFIG_FSL_CAAM 513 #define CONFIG_CMD_HASH 514 #define CONFIG_SHA_HW_ACCEL 515 #endif 516 517 #include <asm/fsl_secure_boot.h> 518 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 519 520 #endif 521