1 /* 2 * Copyright 2010-2011 Calxeda, Inc. 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms of the GNU General Public License as published by the Free 6 * Software Foundation; either version 2 of the License, or (at your option) 7 * any later version. 8 * 9 * This program is distributed in the hope it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program. If not, see <http://www.gnu.org/licenses/>. 16 */ 17 18 #ifndef __CONFIG_H 19 #define __CONFIG_H 20 21 #define CONFIG_SYS_DCACHE_OFF 22 #define CONFIG_L2_OFF 23 #define CONFIG_SYS_THUMB_BUILD 24 25 #define CONFIG_SYS_NO_FLASH 26 #define CFG_HZ 1000 27 #define CONFIG_SYS_HZ CFG_HZ 28 29 #define CONFIG_OF_LIBFDT 30 #define CONFIG_OF_BOARD_SETUP 31 #define CONFIG_FIT 32 #define CONFIG_SUPPORT_RAW_INITRD 33 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) 34 35 /* 36 * Size of malloc() pool 37 */ 38 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) 39 40 #define CONFIG_PL011_SERIAL 41 #define CONFIG_PL011_CLOCK 150000000 42 #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } 43 #define CONFIG_CONS_INDEX 0 44 45 #define CONFIG_BAUDRATE 115200 46 47 #define CONFIG_BOOTCOUNT_LIMIT 48 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD 49 #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ 50 #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c 51 52 #define CONFIG_MISC_INIT_R 53 #define CONFIG_SCSI_AHCI 54 #define CONFIG_SCSI_AHCI_PLAT 55 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 56 #define CONFIG_SYS_SCSI_MAX_LUN 1 57 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 58 CONFIG_SYS_SCSI_MAX_LUN) 59 60 #define CONFIG_DOS_PARTITION 61 #define CONFIG_EFI_PARTITION 62 63 #define CONFIG_CALXEDA_XGMAC 64 65 /* PXE support */ 66 #define CONFIG_BOOTP_PXE 67 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 68 #define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank" 69 70 /* 71 * Command line configuration. 72 */ 73 #include <config_cmd_default.h> 74 75 #define CONFIG_CMD_BDI 76 #define CONFIG_CMD_BOOTZ 77 #define CONFIG_CMD_DHCP 78 #define CONFIG_CMD_ELF 79 #define CONFIG_CMD_MEMORY 80 #define CONFIG_CMD_LOADS 81 #define CONFIG_CMD_SCSI 82 #define CONFIG_CMD_EXT2 83 #define CONFIG_CMD_EXT4 84 #define CONFIG_CMD_FAT 85 #define CONFIG_CMD_PXE 86 #define CONFIG_MENU 87 88 #define CONFIG_BOOTDELAY 2 89 #define CONFIG_BOOT_RETRY_TIME -1 90 #define CONFIG_RESET_TO_RETRY 91 #define CONFIG_AUTOBOOT_KEYED 92 #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay 93 94 /* 95 * Miscellaneous configurable options 96 */ 97 #define CONFIG_CMDLINE_EDITING 98 #define CONFIG_AUTO_COMPLETE 99 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 100 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 101 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 102 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 103 #define CONFIG_SYS_PROMPT "Highbank #" 104 #define CONFIG_SYS_HUSH_PARSER 105 /* Print Buffer Size */ 106 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 107 sizeof(CONFIG_SYS_PROMPT)+16) 108 109 #define CONFIG_SYS_LOAD_ADDR 0x800000 110 #define CONFIG_SYS_64BIT_LBA 111 112 113 /*----------------------------------------------------------------------- 114 * Physical Memory Map 115 */ 116 #define CONFIG_NR_DRAM_BANKS 1 117 #define PHYS_SDRAM_1_SIZE (4089 << 20) 118 #define CONFIG_SYS_MEMTEST_START 0x100000 119 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000) 120 121 /* Environment data setup 122 */ 123 #define CONFIG_ENV_IS_IN_NVRAM 124 #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */ 125 #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ 126 #define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */ 127 #define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR 128 129 #define CONFIG_SYS_SDRAM_BASE 0x00000000 130 #define CONFIG_SYS_TEXT_BASE 0x00008000 131 #define CONFIG_SYS_INIT_SP_ADDR 0x01000000 132 #define CONFIG_SKIP_LOWLEVEL_INIT 133 134 #endif 135